EMT Practice Test

1. Question Content...

---

Question1: When automating a Windows application what type of stage is configured to perform a Global Send Key Events?

Question2: Consider the following flow within an Object Studio action:

The developer of this flow found that writing some credentials to the target application sometimes failed with an exception even though the element exists on the screen. He found that simply catching the exception, waiting for 2 seconds and then retrying fixed the problem.
What problems do you see within the flow? (Choose two.)

Question3: An action called 'Get Account details' fails with the following exception detail:

Which of the following could cause this exception?

Question4: Examine the flow below:

An error has been encountered on Page1 and the exception has bubbled up to be recovered in the Recover1 stage. The 'Yes' path has been taken from the "Throw new Exception?" decision stage. Consider the Throw Exception stage properties below:

How should the properties be configured for the Process to throw a new Business exception, i.e. a different exception to the one encountered in Page1?

Question5: Examine the flow below:

An error has been encountered on Page1 and the exception has bubbled up to be recovered in the Recover1 stage. The 'Yes' path has been taken from the "Throw new Exception?" decision stage. Consider the Throw Exception stage properties below:

How should the properties be configured for the Process to throw a new Business exception, i.e. a different exception to the one encountered in Page1?

Question6: Consider the following process flow from a sub-page of a process:

What is the problem with this sub-page flow?

Question7: Study the process flow below:

The outputs for the Get Next Case are configured below:


What is the correct configuration of the Expression in the "Case-Returned" decision stage?

Question8: Consider the following flow in an object:

Which of the following statements are true?

Question9: Examine the flow below:

An error has been encountered on Page1 and the exception has bubbled up to be recovered in the Recover1 stage. The ‘Yes’ path has been taken from the “Throw new Exception?” decision stage. Consider the Throw Exception stage properties below:

How should the properties be configured for the Process to throw a new Business exception, i.e. a different exception to the one encountered in Page1?

Question10: The Order System application has been successfully launched and Blue Prism has navigated the application to the following screen:

There is a requirement to ensure this screen is in focus before any further interfacing is done with the screen. Which is the correct configuration to ensure the New Order screen is in focus?
A:

B:

C:

D:

Question11: Which of the following indicates a case in a Work Queue is waiting to be worked?

Question12: Examine the flow below:

An error has been encountered on Page 1 and the exception has bubbled up to be recovered in the Recoverd stage The Yes' path has been taken from the "Throw new Exception?" decision stage. Consider the Throw Exception stage properties below:

How should the properties be configured for the Process to throw a new Business exception, i.e. a different exception to the one encountered in Page?

Question13: Which of the following statements regarding the use of Work Queues are correct? (select 2 responses)

Question14: An action called Get Account details' fails with the following exception detail:

Which of the following could cause this exception?

Question15: Study at the following diagram which is an extract from a sub-page of a process being tested in Process Studio:

There are no breakpoints in the "Access Customer Account" subpage however there is an error.
What will happen if you choose to step out (SHIFT+ F11) when debugging the process?

Question16: Consider the following flow in an object:

Which of the following statements are true?

Question17: When entering an option within the Training Order system the relevant option number is entered into the Option number field as below. The Option number input field has been spied in Blue Prism:

The following attribute set has been returned by Application Modeller:

Which Attribute can be un-ticked to ensure consistent visibility of the element to Blue Prism?

Question18: The Saved Quantity Data Item is configured as a number with the initial value 0.
The Loop Orders stage is configured to loop though the Orders collection.
The Get Quantity stage is configured as follows:

What will the data item Saved Quantity contain after the execution of the page?

Question19: Study the following configuration:


Which of the following statements is correct?

Question20: Which of the following statements about Business Objects is true?

Question21: The Work Queue "Customer Onboarding" has a number of Pending Items which may be tagged as
"Domestic", "Retail" or "Business".
What is the correct configuration to get the next item from the queue that is tagged either "Retail" or
"Business"?

Question22: Study the following configuration





Which of the following statements is correct?

Question23: Consider the following flow within an Object Studio action:

The developer of this flow found that writing some credentials to the target application sometimes failed with an exception even though the element exists on the screen. He found that simply catching the exception, waiting for 2 seconds and then retrying fixed the problem.
What problem do you see with the flow?

Question24: An action called 'Get Account details' fails with the following exception detail:

Which of the following could cause this exception?

Question25: An Action in a Business Object needs to use Global Send Keys to populate the 'Staff Number' field in an application called Centrix Data Solutions. The application is in focus and the cursor is placed in the Staff Number field.
Examine the stage properties window below:

In order to configure a Global Send Keys action to populate the Staff Number field, which element in the Application Explorer tree displayed above, would you drag to the Element column in the stage, so that this operation can be complete?

Question26: Which of the statements below best describes what Blue Prism is used for?

Question27: When automating a Windows application what type of stage is configured to perform a Global Send Key Events?

Question28: Study the following image showing pan: of the flow within a process:

Question29:
What is wrong with the flow shown in the image?

Question30: Consider the following flow in an object:

Which of the following statements are true?

Question31: How can a session variable value be updated when a process is running? (select all that apply)

Question32: Which area of Blue Prism would you find application logic and rules?

Question33: When considering an element’s attributes in Application Modeller which of the following statements are true?
(Choose all that apply.)

Question34: Consider the following flow in an object:

Which of the following statements are true?

Question35: The Order System application has been successfully launched and Blue Prism has navigated the application to the following screen:

There is a requirement to ensure this screen is in focus before any further interfacing is done with the screen.
Which is the correct configuration to ensure the New Order screen is in focus?
A)

B)

C)

D)

Question36: You identify an element in Application Modeller but when you highlight or use that element Blue Prism gives you an error message saying that duplicate elements were found.
Which of the following statements is true?

Question37: Consider the following flow within an Object Studio action:

The developer of this flow found that writing some credentials to the target application sometimes failed with an exception even though the element exists on the screen. He found that simply catching the exception, waiting for 2 seconds and then retrying fixed the problem.
What problems do you see within the flow'' (select 2 responses)

Question38: How can a session variable value be updated when a process is running? (select all that apply)

Question39: A process has been created but it is not listed in Control Room. The following reasons have been suggested.
1. The process uses objects with different run modes
2 The process has not been published
3. Process validation shows more than 99 errors
4. The user does not have privileges to run processes in Control Room?
Which of the above could cause the process not to be visible in Control Room?

Question40: How many Start Stages can a sub-page in a Process have?

Question41: How can a session variable value be updated when a process is running?

Question42: Consider the following flow within an Object Studio action:

The developer of this flow found that writing some credentials to the target application sometimes failed with an exception even though the element exists on the screen. He found that simply catching the exception, waiting for 2 seconds and then retrying fixed the problem.
What problems do you see within the flow?

Question43: Examine the Process below:

An error has been encountered on Page 1 and the exception has bubbled up to be recovered in the Recover stage. If there is an error in the Calc 1 stage which path will the Process take?

Question44: Examine the flow below:

An error has been encountered on Page1 and the exception has bubbled up to be recovered in the Recover1 stage. The 'Yes' path has been taken from the "Throw new Exception?" decision stage.
Consider the Throw Exception stage properties below:

How should the properties be configured for the Process to throw a new Business exception, i.e. a different exception to the one encountered in Page1?

Question45: Study the following process flow on the Main Page of a process where the intention is to preserve the current exception.

What is wrong with the design?

Question46: A Blue Prism solution works fine when developing and testing it in Process and Object Studio, but when it is run in Control Room, exceptions occur because elements are not being found.
What is the most likely cause of this behaviour?

Question47: Study the following page in a process:

The calculation stages contain the following:

What will be the outcome after the page has run?

Question48: Study the following configuration:


Which of the following statements is correct?

Question49: Which of the following statements regarding the use of Work Queues are correct? (select 2 responses)

Question50: When configuring an object's run mode which of the following is true?

Question51: Examine the flow below:

An error has been encountered on Page 1 and the exception has bubbled up to be recovered in the Recoverd stage The Yes' path has been taken from the "Throw new Exception?" decision stage. Consider the Throw Exception stage properties below:

How should the properties be configured for the Process to throw a new Business exception, i.e. a different exception to the one encountered in Page?

Question52: Study the following diagram which is an extract from a sub-page of a process being tested in Process Studio:

There are no breakpoints in the "Access Customer Account" subpage however there is an error.
What will happen if you choose to step out (SHIFT +F11) when debugging the process?

Question53: When considering an element's attributes in Application Modeller which of the following statements are true?
(select all that apply)

Question54: The main menu of the application Centrix Data Solutions consists of a series of buttons, as displayed below:

When the buttons spied, the element attributes are all identical, with the exception of the Window Text attribute which differs. The Window Text values for each of the buttons displayed above, are 'HOME', 'ORDERS', 'CUSTOMER', 'STOCK', 'INBOX', 'SETTINGS' and 'EXIT'.
It is described to use a single Dynamic element to interact with each of the menu buttons. The Dynamic button element has been spied and has the following attributes set:

A Navigate stage has been configured to press the ORDERS button:

To ensure the Navigate stage can click the ORDERS button successfully, what additional configuration is required in the Navigate stage?

Question55: Examine the flow below:

An error has been encountered on Page 1 and the exception has bubbled up to be recovered in the Recoverd stage The Yes' path has been taken from the "Throw new Exception?" decision stage. Consider the Throw Exception stage properties below:

How should the properties be configured for the Process to throw a new Business exception, i.e. a different exception to the one encountered in Page?

Question56: Study the following page in a process:


Calculation stages will write A, B or C to the Output value data item.
What will be the outcome after the page has run?

Question57: A process contains only 4 stages. Study the following process below:

The data item 'New Date is a date data item with no initial value.
The calculation stage is configured as follows:

What will happen when you execute the Create Date stage?

Question58: When considering an element's attributes in Application Modeller which of the following statements are true?
(select all that apply)

Question59: Consider the following process flow:

What is the problem with this flow?

Question60: A process contains only 4 stages Study the following process flow:

The data Item Result' is a number data item with an initial value of 2.
The calculation stage is configured as follows:

Following the execution of the Perform Calculation stage, which of the following is true?

Question61: When considering an element's attributes in Application Modeller which of the following statements are true?
(select all that apply)

Question62: Consider the following process flow from a sub-page of a process:

What is wrong with the flow shown in the image?

Question63: The Stock Value Calculator application has been launched successfully by a Business Object named 'Stock Value Calculator - Basic Actions'.
A second Business Object named 'Stock Value Calculator - Historic Values' is used to interface with the Historic Values screen within the application.
The Wait stage highlighted below has encountered an Internal Exception:

Details of the Exception are provided below:

What action is required to present this error occurring?

Question64: The Saved Quantity Data Item is configured as a number with the initial value 0.
The Loop Orders stage is configured to loop through the Orders collection.
The Get Quantity stage is configured as follows:

What will the data item Saved Quantity contain after the execution of the page?

Question65: Consider the following process flow:

Decision "A" properties are:

Decision "B" properties are:

Decision "C" properties are:

What will happen when the process runs?

Question66: Study the following process flow:

This is the Main Page of a simple process which calls the Page Calculation before completing.
The data items are configured as follows:
X is a Number data item with an initial value of 20

Y is a Number data item with an initial value of 5

Result is a Number data item with no initial value

The Calculation page stage is configured as follows:

The Calculation Page is as follows:

The Data Items are configured as follow:
X is a Number data item with an initial value of 10

Y is a Number data item with an initial value of 5

Result is a Number data item with no initial value

The Start Stage is configured pass through the X and Y values an input parameters The divide calculation stage expression is [X] / [Y] The end stage is configured to pass back the results value as an output parameter.
What will be contained in the Result Data Item on the Main Page following the execution of the Process?

Question67: The data item "Loop Counter" is a number data item and has an initial value of 0. The data item "Max Loops" is a number data item and has an initial value of 10.
The two stages are configured as follows:


How many times will the Loop Again stage be executed when the page is executed?

Question68: The Work Queue 'Account Closure has a number of Pending Items which may be tagged as "Current",
"Saving" or "Loan" What is the correct configuration to get the next item from the queue that is tagged either
"Current" or "Loan"?

Question69: Examine the following process flow:

The Loop Orders loop is configured to loop through the Orders collection.
How Many times will the 'Process Order' page be executed?

Question70: Which of the following indicates a case has been worked successfully in a Work Queue?

B)

C)

D)

Question71: Study the following image showing pan: of the flow within a process:

What problems do you see with the process flow? (select 2 responses)

Question72: When automating a Windows application what type of stage is configured to perform a Global Send Key Events?

Question73: The Work Queue "Customer Onboarding' has a number of Pending Items which may be tagged as "Domestic",
"Retail" or "Business" There is also a tag for the 8 digit product code formatted as "Product Code: {product code}" e.g. Product Code: CA123456.
What is the correct configuration to get the next item from the queue that:
* Isn't applying for a loan product i.e. Product Code doesn't begin with "LN" And
* Is a domestic customer

Question74: A Blue Prism solution interfaces with an internet application called HappyWeb There is a test website available for development, and a training site available for user acceptance testing, and there is the production she available for processing live cases in HappyWeb.
Which of the following is true?

Question75: Which of the following can you perform in Control Room? (select all that apply)

Question76: A screen contains four buttons, Find, Save, Close and New. When the buttons are spied, the attributes are identical except for the Window Text attribute.
The values for the Windows Text attribute are 'Find' for the Find button, 'Save' for the Save button, 'Close' for the Close button and 'New' for the New Button.
The Dynamic Button element has been spied and has the following attributes set:

A navigate stage has been configured to press the Close button:

What additional configuration is required to ensure the Close button is selected by the Navigate stage?

Question77: A Blue Prism solution interfaces with an internet application called HappyWeb. There is a test website available for development, and a training site available for user acceptance testing, and there is the production site available for processing live cases in HappyWeb.
Which of the following is true?

Question78: Consider the following process flow:

Decision "A" properties are:

Decision "B" properties are:

Decision "C" properties are:

What will happen when the process runs?

Question79: Which of the following indicates a case in a Work Queue is waiting to be worked?
A:

B:

C:

D:

Question80: Examine the following Process flow:

The 'Customer Credits' Collection contains the following data:

The 'Customer Account Credits' loop is configured to loop through the 'Customer Credits' Collection.
The 'Total Credits' data item is configured as a number data item with an initial value of 0.
The 'Get Total Credits' Calculation stage contains the following expression:

What will the Total Credit data item value be after the page has executed?

Question81: Consider the following process flow:

What is the problem with this flow?

Question82: Which of the following can you perform in ? (select all that apply)

Question83: A business object needs to use a Global Send Keys stage to populate the User Name field in an application entitled Workflow. The application is in focus and cursor is in the User Name field. In order to configure the Global Send Keys, which element needs to be placed in the Element field of the stage below?

Question84: A business object needs to use a Global Send Keys stage to populate the User Name field in an application entitled Workflow. The application is in focus and cursor is in the User Name field.
In order to configure the Global Send Keys, which element needs to be placed in the Element field of the stage below?

Question85: If you change an environment variable when will the new value be available to the process?

Question86: A business object needs to use a Global Send Keys stage to populate the User Name field in an application entitled Workflow. The application is in focus and cursor is in the User Name field. In order to configure the Global Send Keys, which element needs to be placed in the Element field of the stage below?

Question87: Which of the following indicates a case in a Work Queue is waiting to be worked?
A)

B)

C)

D)

C

Question88: You identify an element in Application Modeller and it highlights uniquely and can be used in your object flow diagram. The next day you find that Blue Prism cannot no longer identify the same element, your object flow is giving you 'Element not found' exceptions.
Which of the following statements is true?

Question89: Examine the Process below:

An error has been encountered on Page1 and the exception has bubbled up to be recovered in the Recover1 stage. If there is an error in the Calc1 stage which path will the Process take?

Question90: Which of the following flows can you not create in Blue Prism? (select 2 responses) A)

B)

C)

D)

Question91: In which of these scenarios is it ok not to use a Blue Prism work queue as part of your Blue Prism solution?

Question92: You identify an element in Application Modeller but when you highlight or use that element Blue Prism gives you an error message saying that duplicate elements were found.
Which of the following statements is true?

Question93: Which of the following can you perform in the System->Workflow area of Blue Prism? (Choose all that apply.)

Question94: When configuring an object's run mode which of the following is true?

Question95: Study the following image showing part of the flow within a process:

What problems do you see with the process flow? (Choose two.)

Question96: The following Calculation Stage uses the Todays function to get the current date as a date value and place it in a data item entitled "Today".

Which of the following statements is correct?

Question97: The following Calculation Stage uses the Today function to get the current date as a date value and place it in a data item entitled "Today".

Which of the following statements is correct?

Question98: A business object needs to use a Global Send Keys stage to populate the User Name field in an application entitled Workflow. The application is in focus and cursor is in the User Name field. In order to configure the Global Send Keys, which element needs to be placed in the Element field of the stage below?

Question99: The Order System application has been successfully launched and Blue Prism has navigated the application to the following screen:

There is a requirement to ensure this screen is in focus before any further interfacing is done with the screen.
Which is the correct configuration to ensure the New Order screen is in focus?

Question100: Consider the following diagram from an object studio action:

What is the problem with this flow?

Question101: Consider the following diagram from an object studio action:

What is the problem with this flow?

Question102: A process contains only 4 stages. Study the following process below:

The data item ‘New Date is a date data item with no initial value.
The calculation stage is configured as follows:

What will happen when you execute the Create Date stage?

Question103: Study the following diagram which is an extract from a sub-page of a process being tested in Process Studio:

There are no breakpoints in the “Access Customer Account” subpage however there is an error.
What will happen if you choose to step out (SHIFT + F11) when debugging the process?

Question104: Consider the following process flow from a sub-page of a process:

What is the problem with this sub-page flow?

Question105: What is wrong with the flow shown in the image?

Question106: Study the following diagram which is an extract from a sub-page of a process being tested in Process Studio:

There are no breakpoints in the "Access Customer Account" subpage however there is an error.
What will happen if you choose to step out (SHIFT +F11) when debugging the process?

Question107: Examine the following extract taken from an Action in Object Studio:

What will happen if an Exception occurs in the 'Read Nasdaq Data' stage?

Question108: When working with the orders area of the Centrix Data Solutions order system, there is a requirement to enter an order menu option in the field located above the Go button:

The menu option field element in Application Modeller has been configured as follows:

Which Attribute should be un-ticked to ensure the menu option field element can be consistently recognized?