EMT Practice Test

1. Question Content...

---

Question1: An end user discovered that the touch-screen features on a Windows device have stopped working. Which of the following should a technician check?

Question2: A technician is installing a USB Wi-Fi card. Which of the following would be the MOST appropriate way for the technician to receive the latest official drivers for the device?

Question3: A technician is selecting a power supply for a new computer. There will be a large number of connected devices that must be powered by USB. Which of the following specifications should the technician prioritize?

Question4: A remote user reports connectivity issues with the local internet provider. Even after a technician reboots the modem supplied by the ISP. the issue persists. Which of the following would BEST establish the connection in minimal time?

Question5: A user indicates that a laptop is not performing well. A technician determines the laptop has a conventional HDD and that installing a SSD will improve the laptop's performance. Which of the following lists of steps describes what the technician should do to complete the upgrade with the LEAST amount of downtime?

Question6: A laptop is experiencing slow performance writing data. Which of the following is the best component for a technician to upgrade to fix the issue?

Question7: A thermal punier that is used 10 print order buckets m a factory has been experiencing Issues following the failure of the alt conditioner during the summer. Each ticket has blank spots or is missing text. Which of the following would MOST likely solve these Issues?

Question8: A user reports limited or no connectivity on a laptop. A technician runs ipconf ig /all with the following result:

Which of the following is the MOST likely cause of this issue?

Question9: Which of the following should a technician use in DNS to map a device to an IPv6 address?

Question10: A technician installed a high-end graphics card in a desktop, and now, the desktop randomly shuts down during operations. Which of the following should the technician do next?

Question11: Which of the following servers is used to collect data and information about events from a network-connected host?

Question12: Using the output below:

Which of the following is the default gateway?

Question13: Which of the following components houses the MX record?

Question14: A developer is requesting permission to utilize client-side virtualization. The developer would like to write code in a setting isolated from other infrastructure to avoid negative impacts of experimental code. Which of the following provides the best solution for the developer?

Question15: A customer's Windows tablet PC was dropped and is no longer responding to touch input on the left half of the screen. The screen protector has several scratches. but the glass is not broken. Which of the following should a technician do to diagnose the issue?

Question16: Which of the following allows a switch to be divided into separate logical networks?

Question17: The output from print jobs a user submitted to a laser printer is missing the color yellow. The user has already attempted a cleaning cycle. Which of the following parts most likely needs to be replaced?

Question18: After a company upgraded its network infrastructure, a user's desktop has been experiencing slow network speeds. Which of the following should a technician do first to improve desktops connectivity performance?

Question19: A technician is upgrading a user's laptop from an HDD to an SSD. The user's laptop only has a single bay for a hard drive. Which of the following characteristics of the SSD is the most important in this scenario?

Question20: A technician receives a phone call from a traveling sales representative indicating that the maps application on a phone is not working. The representative runs a speed test on the phone and gets ~10Mbps in both directions. Which of the following settings should the technician check first to troubleshoot the issue?

Question21: Which of the following internet connection types would be the most readily available for users located on unimproved land that lacks infrastructure?

Question22: A help desk technician receives a ticket regarding a non-functioning printer The ticket states the printer is no longer producing legible prints. and everything that prints appears as symbols. Which of the following is the most likely cause of this issue?

Question23: A technician is setting up a projector for a videoconferencing system. When the user attempts to connect a laptop to the system, the system displays the following error message:
no source found
The user tries multiple cables and inputs on the projector Which of the following should the user try next?

Question24: Which of the following wireless technologies is used by mobile devices to process payments at kiosks?

Question25: The GPS on a user's phone has been unreliable. Which of the following will MOST likely resolve the issue?

Question26: A technician is configuring the router for a small business network. Which of the following settings should the technician configure first?

Question27: During an OS migration, a technician is unable to find compatible current software for a specialized hardware device. Which of the following actions should the technician take to complete the migration?

Question28: Which of the following types of connectors does an IDE hard drive use for power?

Question29: An end user needs to upgrade the hard drive on a laptop and wants one that is fast and shock resistant. Which of the following is the BEST option for this end user?

Question30: A technician set up a new access point and has noticed significant latency on the selected channel. Which of the following tools can assist with locating the BEST channel to use?

Question31: A technician installs a new printer for a workstation and tries to print a test page, but the page does not print.
The technician looks at the print queue and notices that the printer is called 'Generic Printer." Which of the following BEST describes what the technician should do to fix this issue?

Question32: Which of the following is most likely used to control door access?

Question33: A classroom projector, which is turned on, displays a flashing LED code but does not have any video output.
Which of the following should a technician do to resolve the issue?

Question34: A printer displays an error message even after a paper jam is cleared. Which of the following should a technician do to fix the issue?

Question35: A department is upgrading its printers and wants to save money on consumables. Which of the following printer features would allow the department to cut costs?

Question36: A technician is unable to connect to a network device via SSH_ Which of the following cables should the technician use as an alternative connection method with a laptop?

Question37: A technician is troubleshooting a projector that will not display any Images. The technician has verified the computer output and cable are providing a good video signal. Which of the following should the technician do NEXT?

Question38: After a new network printer is installed and added to the print server, users are unable to install the printer.
However, the technician is able to install the printer when logged in to a user's computer as an administrator. Which of the following is the best option to allow all users to print to the new printer?

Question39: The motherboard on a user's company laptop was recently replaced Now the user is unable to log in using the fingerprint reader The fingerprint reader is working but it does not recognize the user's fingerprint Which of the following should a technician perform FIRST to fix the issue?

Question40: Multiple users contact the help desk to report issues with the network fileshares. Files are accessible, but performance is very slow. Which of the following should a technician perform first?

Question41: A technician has been called into a conference room to help with a video call setup. The user is unable to get the laptop screen to mirror to the in-room television. The technician confirms that the appropriate HDMI cable is plugged into the user's computer and the TV has a blinking logo on the screen Which of the following is most likely causing the issue?

Question42: A technician upgrades a PC with two DIMMs, for a total of 32GB. After installing the two DIMMs, the user notices the OS is reporting only 16GB. Which of the following tasks should the technician perform to resolve the issue in the most rapid, cost-effective way possible?

Question43: A technician is replacing the motherboard of a workstation for a user who runs multiple large applications at the same time. Which of the following motherboard specifications would provide the most significant improvement in performance?

Question44: A technician is asked to purchase and install a line-of-sight wireless system that provides a stable network connection between two buildings. Which of the following needs to be considered prior to purchasing the system?

Question45: An engineer is setting up two-factor authentication so users can access a company's human resources system.
Which of the following should the engineer require users to do?

Question46: A user's brand new phone froze while information was being transferred from the old phone. When a technician reset the new phone, it functioned properly when a data transfer was not being attempted. When the technician tested the old phone, it did not appear to have any functionality issues and passed all forms of device testing. Which of the following is the most likely reason the data transfer failed?

Question47: A user wants a second monitor installed on a laptop. The VGA/DVI or HDMI cables have already been connected. Which of the following should the technician do to configure the laptop to show both screens?

Question48: A technician is replacing a failed power supply in a ten-year-old computer When installing the customer- provided power supply, the technician discovers the ATX connector would not plug into the motherboard.
The customer wants a cost-effective solution. Which of the following should the technician do next?

Question49: A technician is upgrading the power supply of a workstation that is running multiple GPUs in an SLI configuration. Which of the following cables is needed to ensure the power supply can support the workstation?

Question50: A salesperson is using a weather application on a mobile device. The application appears to be draining the device's battery very quickly. Which of the following is the BEST action for the salesperson to take in order to view weather forecasts while traveling?

Question51: A technician needs to verify that a newly installed RJ45 was correctly terminated. Which of the following should the technician use?

Question52: A technician recently discovered me root cause of an application error that several users have been experiencing. The technician updated the configurations on the affected machines and verified full functionality was restored for all users, which of the following actions should the technician perform NEXT?

Question53: A user's laptop will not turn on for a meeting in a conference room. However, the laptop turns on correctly when connected to the external monitor, mouse, and keyboard at the user's desk. Which of the following should a technician do to ensure that the laptop functions everywhere in the office?

Question54: A technician is receiving reports that the entire office sporadically loses network connectivity throughout the day. The technician determines the root cause to be EMI. Which of the cable mediums would be the MOST cost effective without sacrificing system performance?

Question55: An integrated webcam on a user's laptop broke, so a technician installed a temporary, external webcam. Since the external webcam installation, other users can only see part of the user's face during videoconferences.
Which of the following BEST describes the reason for this issue?

Question56: A technician sets up secure print and configures an NFC device that will authenticate users for access. Which of the following will the NFC device most likely use to authenticate?

Question57: A hardware technician is configuring a laptop, and the network administrator requires the network settings to be static. The technician successfully pings the servers by IP address but cannot ping the UNC path. Which of the following is the cause of this issue?

Question58: A new VolP solution is being implemented at a corporate office for more than 200 users. The new VolP devices do not require AC adapters at the users' desks. Which of the following network devices should a technician purchase?

Question59: A technician is troubleshooting a laptop that sometimes fails to charge. The technician has already tested the power adapter and determined the connection is good. Which of the following is the most likely cause of the issue?

Question60: A new directive mandates the use of a security component to securely allow users to authenticate to systems, access sensitive data, and enter the office. The component must provide an additional factor of authentication alongside user accounts and cannot be something the user o Which of the Mowing components best meets these requirements?

Question61: An organization is looking to upgrade the processing ability for its computers. Most users report that whenever multiple applications are being utilized, the system's response time slows down drastically. When only one application is open, the response time is acceptable. Which of the following should be upgraded FIRST?

Question62: A user connects a laptop to a conference room audiovisual system using a VGA cable. The TV displays the image correctly, but the audio is not working. Which of the following will most likely resolve the issue?

Question63: A user states that the touch pad cursor shows a trail when moved. The issue started after a coworker used the machine. Which of the following setting areas should be used to fix this issue?

Question64: An administrator is replacing a cable that uses a DB9 connector VVhich of the following cables is the administrator replacing?

Question65: An online retailer is working to support increased sales and boost server capacity by installing additional servers. Which of the following should be used to ensure each new server will be properly utilized?

Question66: A user's computer is not receiving a network connection. The technician confirms that the connection seems to be down and looks for the user's port on the patch panel. The port and patch panel are not labeled. Which of the following network tools should the technician use to identify the port?

Question67: A technician is adding one more line at the demarcation point. Which of the following tools would be MOST useful to accomplish this task?

Question68: When a user's workstation is turned on, a message displays indicating that the date and time are incorrect.
Other computers on the network do not display this message. Which of the following is the most likely cause of this issue?

Question69: Employees are concerned about sensitive data being printed on a shared multifunction printer located in a high-traffic hallway. Which of the following should a technician do to address this concern?

Question70: A technician has set up a new conference room with a TV and a video soundbar. The technician wants to test the system with a conference call. During the test, the TV speaker produces sound, but the soundbar does not.
Which of the following is the MOST likely cause of the issue?

Question71: Which of the following allows all VMs in a virtual environment to have RAM allocated for use?

Question72: A remote user called the help desk to report a notification indicating there is limited or no connectivity. The user can access local file folders and other local machines but none of the organization's servers or network items. Web pages do not appear to function either. Which of the following is the MOST likely cause of the issue?

Question73: A technician is troubleshooting a network issue and needs to check the status of a local network device in the least disruptive manner possible_ Which of the following tools should the technician use to accomplish this task?

Question74: A user reports that a laptop's display is too dim. Which of the following should a technician try first to troubleshoot the issue?

Question75: A technician is inspecting a projector that is displaying fuzzy images. Which of the following actions would provide the BEST solution?

Question76: An administrator is replacing 15.000rpm hard drives in a server. Which of the following is the interface type the drives most likely use?

Question77: Which of the following connectors can be plugged into a Thunderbolt 3 port on a laptop?

Question78: A user's smartphone repeatedly loses the connection to a home Wi-Fi network. The user has already tried restarting the smartphone, rebooting the router, and resetting the smartphone's Wi-Fi network settings. Which of the following should the user do next to resolve the issue?

Question79: A user's computer is experiencing poor performance. A technician runs a diagnostic tool on the hard drive, and the results show a significant increase in the number of reallocated sectors. Which of the following steps should the technician take next?

Question80: Which of the following network devices is needed to direct packets to networks outside of the LAN?

Question81: A company gives users microSD cards to install on smartphones so users can store pictures that will be used on the website. After installing the cards, users report only being able to save a small number of pictures on the microSD cards before running out of space. Which of the following is the most likely issue?

Question82: Which of the following wireless standards can operate in the 6GHz frequency range?

Question83: Which of the following components enables finger-based screen input for two-in-one laptops?

Question84: Which of the following would an administrator use to migrate virtual machines from on premises to the cloud?

Question85: Which of the following protocols provides the fastest bandwidth?

Question86: Which of the following is a valid use for PaaS?

Question87: A technician connects a new computer to the internet and then opens the wiring closet. Even though all of the wires are terminated, nothing in the wring closet is labeled. Which of the following tools should the technician use to complete the task?

Question88: A technician is using a PAN to connect a group of users on a field project. Which of the following services should the technician activate on the mobile device to share the internet data connection?

Question89: A company wants to add virtual servers to handle unusually high web traffic usage. Which of the following is the most efficient way?

Question90: A technician needs to improve a workstation's overall response time for frequently used applications and data without removing the current hard drive. Which of the following storage devices should the technician install to BEST accomplish the objective?

Question91: Which of the following best describes the concept of a DHCP lease?

Question92: A user is looking for a way to increase the total RAM in a system without upgrading the hardware. Which of the following should the user perform to complete this task?

Question93: A user reports that a printer is leaving streaks on printed pages. The paper type and the toner have been replaced. Which of the following should the technician check NEXT to resolve the issue?

Question94: An engineer is installing a 500W power supply in a server that requires continuous availability. Which of the following is the most suitable type of power supply for the application?

Question95: Which of the following combinations of specifications and frequencies delivers the greatest speed and compatibility for lot devices?

Question96: A user reports that all print jobs sent to a laser printer have random and incorrect characters throughout the pages. Which of the fallowing actions should the technician do to resolve this issue?

Question97: A technician is implementing a RAID array for the financial department. The solution should allow fast access to data and maximum redundancy. Which of the following RAID configurations best meets these requirements?

Question98: A technician receives a PC that frequently shuts down and has extremely loud fans. When the technician begins a stress test, the PC shuts down almost immediately. Which of the following should the technician do next?

Question99: An internet service provider is delivering service through a copper medium with shared customer bandwidth.
Which of the following services has most likely been installed?

Question100: A technician is mitigating threats to web clusters. Which of the following tools is the most appropriate for a technician to use to mitigate unwanted traffic against the web clusters' public-facing interface?

Question101: A technician is attempting to connect the wired LANs at two nearby buildings by installing a wireless point-to- point connection. Which of the following should the technician consider?

Question102: A customer calls the help desk to report a problem connecting to a shared drive on a server. The technician determines that the user's server credentials have expired and reactivates them. Which of the following should the technician do next?

Question103: A user is connecting to a network via a Bluetooth hot-spot. Which of the following best describes this type of network?

Question104: A technician is setting up a new workstation at a customer's office. The office network has one public IP address and utilizes NAT for the internal network. In addition, DHCP is not used, so all IP addresses are manually provisioned. Which of the following IP addresses should the technician assign to the workstation?

Question105: A technician is installing a wireless access point and is required to run all cabling and make patch cords if necessary.
INSTRUCTIONS
Part 1
For each cable type, click the (+) to select the appropriate connector and tool.
part 2
An access point was moved and no longer has connectivity. Connect the access point, patch panel, and switch by clicking the (+) to select the appropriate cable end for each corresponding location to create a link.
The link will be visible after making the second selection of each pair.
Cable ends may be used multiple times, and all placeholders will be filled.

Question106: Which of the forming connector types would best suit a company that experiences a large volume of internet traffic?

Question107: A technician is troubleshooting a wireless network issue. The users are all connected to the network, but the throughput is slow, and connections often drop. Which of the following should the technician check first?

Question108: A SOHO customer would like to purchase network hardware to enhance security. The hardware should perform stateful packet Inspection Which of the following would BEST address the customer's need?

Question109: A technician is upgrading memory on a laptop that is experiencing performance issues. Which of the following RAM types should most likely be specified for installation?

Question110: Which of the following cables should be used when connecting a cable modem to a SOHO router?

Question111: A sales team user is attending a conference and wants a mobile device that allows the user to quickly collect contact information from as many potential leads as possible. Which of the following connection methods should a technician configure for the user?

Question112: A colleague has a laptop that has been working as expected for several years wall outlet. The MOST likely component that needs to be replaced is the:

Question113: A technician has verified full system functionality and implemented preventive measures. Which of the following represents the NEXT step the technician should take according to the best practice methodology?

Question114: A technician is working to replace a single DDR3 RAM module on a laptop that has two occupied slots_ When the technician tries to tum on the laptop, the computer starts beeping and does not pass POST The technician double-checks the newly installed RAM and notices a motherboard message indicating low voltage. Which of the following is the most likely cause of this Issue?

Question115: A technician is upgrading the Wi-Fi card on a laptop. Which of the following should the technician do first?

Question116: A customer's laptop is making clicking sounds in the area where non-volatile storage is installed. A technician examines the laptop and confirms the issue. Which of the following is the most appropriate replacement part?

Question117: An engineer is troubleshooting a missing new drive in Windows 10 and discovers the drive was formatted before going offline. Which of the following steps should the engineer take to resolve the issue?

Question118: A user entered a help desk ticket stating the latest calendar updates have not appeared on the user's corporate mobile device for several days, even though updates do appear on the user's laptop. Which of the following actions will MOST likely enable calendar alerts?

Question119: A technician is upgrading a computer OS from Windows 7 to Windows 10. During the OS installation, the system is not able to find the hard drive. Which of the following can the technician do to MOST likely fix the issue?

Question120: A user's track pad has stopped working. Which of the following should the user do to resolve the track pad's functionality?

Question121: Which of the following configurations is used to logically segregate computers that are physically connected to the same network?

Question122: A team is having Issues With paper jams on a printer that the team shares With other teams. The team that IS having Issues prints legal-sized documents, and the other teams print letter-sized documents. Which of the following is most likely the issue?

Question123: Which of the following differentiates PAN from LAN?

Question124: Which of the following protocols can be used to securely access a remote network to troubleshoot various devices?

Question125: An engineer discovers the reason a user is unable to access the internet on a company laptop is because the RJ45 port failed. Which of the following should the engineer do to immediately restore network connectivity?

Question126: New memory modules were installed in several Windows desktops but some users are still reporting performance issues. Upon investigation, a systems administrator notices the desktop has not recognized the new memory modules. Which of the following should the systems administrator perform to help resolve this issue?

Question127: Which of the following network devices would an administrator use to distribute traffic evenly throughout multiple nodes?

Question128: Which of the following translates a hostname to IP addresses?

Question129: A technical lead wants to migrate all common business applications, including email and fileshares, to the cloud. Which of the following cloud concepts should be used?

Question130: A business purchased a new multifunction printer that will be used to photocopy documents with hundreds of pages. A technician is configuring the printer. Which of the following features should the technician ensure is set up?

Question131: A salesperson is unable to reach the internet from a home office PC A support technician wants to verify the router is receiving a valid public IP address Which of the Wowing is a valid public IP address in this scenario?

Question132: Which of the following is a legacy 15-pin cable type?

Question133: A technician is on site troubleshooting a customer's laptop. The technician needs to download a software update but the company's proxy is blocking updates. Which of the following would be the MOST appropriate action for the technician to take to get the update?

Question134: A startup company is outgrowing its current office space and is requiring employees to work remotely. The company must comply with government-enforced requirements to safeguard all aspects of data, so the IT department plans to maintain complete control over users' operating systems. Which of the following should the IT department implement?

Question135: Recently, an organization received a number of spam emails that passed through the spam gateway. The emails contained generally the same information, but the sending domains were different. Which of the following solutions would BEST help mitigate the issue?

Question136: A technician recently reinstalled a previously virtualized application directly to a user's computer. Now, the application is not launching. Which of the following did the technician most likely do to cause this issue?

Question137: A PC's boot drive is showing signs of imminent failure, and a technician needs to recover the data. Which of the following should the technician do first?

Question138: Which of the following cloud-computing concepts describes an application that is hosted on the internet but can be used and configured as needed internally per organization?

Question139: An engineer is experiencing unexpected reboots on a graphics workstation when rendering complex 3-D models. The workstation is configured with a 115V power supply that is rated at 200W and connected to a UPS. The central processing unit contains 16 hyperthreaded cores, and a discrete graphics solution utilizing an 8-pin power connector is installed in a PCI Express x16 slot. Which of the following indicates where the technician should begin troubleshooting?

Question140: A customer reports that a printer is only printing misaligned images. Which of the following should the technician do to correct the issue?

Question141: A tier one technician has spent the past thirty minutes troubleshooting an Issue With an end user's network connection After a solution was implemented, the end user rebooted the system, tested the Issue, and confirmed the Issue was resolved. Which of the following should the technician do NEXT?

Question142: Which of the following is a scenario in which an F-type connector would be used?

Question143: A department sends in a ticket to report a printer is not working. The responding technician sees paper stuck to the fuser, which is much hotter than normal. The (user was just installed a few weeks ago. as indicated by the service history. Which of the following should the technician do NEXT?

Question144: Which of the following is the purpose of an IPv4 gateway?

Question145: A technician is troubleshooting a burning smell on a desktop computer. The technician determines that the odor is coming from inside the device.
Which of the following should the technician do first?

Question146: A technician needs to provide a new employee with a phone number for their company mobile phone. Which of the following is the most cost-effective and professional way to complete this task?

Question147: A user connected a laptop to a projector. The image on the screen is very fuzzy, but the image's brightness is satisfactory. Which of the following projector settings should the user adjust first to correct the issue?

Question148: While using a popular videoconferencing program, the user selects a webcam, but the software is unable to open the webcam. The webcam was working the previous day. Which of the following should be done to address this issue?

Question149: A user purchased a retail router and would like to set up a private network. Which of the following network address ranges should the user configure?

Question150: An IT technician is inspecting the internal components of a desktop computer to assess a suspected power issue with the motherboard. Which of the following connectors should the IT technician inspect further?

Question151: A software developer used client-side virtualization on a server to configure a web application. Although the application is working locally on the software developer's PC, other users on the LAN are not able to access the application. Which of the following would allow other users to access the application?

Question152: A technician is creating a new RAID array for a customer After interviewing the customer, the technician decides to implement a RAID array of striping without parity. Which of the following reasons would lead the technician to choose striping without parity instead of striping with parity?

Question153: An end user is having trouble printing from an application. The text on the page is unreadable. However, the application prints successfully from a newer computer. Which of the following should be done next?

Question154: A technician needs to recommend an internet connection for a customer who travels around the world and wants to have connectivity while visiting remote camping locations. Some of the locations the customer visits have limited or unreliable cellular service. Which of the following connection types should the technician recommend?

Question155: Which of the following is the best example of when to use virtualization?

Question156: A technician is setting up storage in a server that only has SAS connectors for storage. The technician wants the server to utilize RAID 10 for increased performance. Which of the following storage types should the technician install?

Question157: A company has implemented a policy that allows employees to use personal devices to perform work duties.
Which of the following policies should the technician activate to protect company information?

Question158: Which of the following port numbers is used for a file transfer?

Question159: A user reports a monitor, keyboard, mouse. and headset are no longer functioning. The user has restarted the laptop and tested an alternative headset and monitor, but the issue persists. The technician notices the user has a printer. USB-C hub, and AC adapter plugged into the laptop. Which of the following should the technician do to MOST likely resolve the issue?

Question160: A company needs to print several copies of a multipage document with the least consumption of resources possible. Which of the following settings will best accomplish this task?

Question161: A user reports issues with a smartphone after dropping it. The icons on the screen all look normal, but when the user touches the email icon, for example, nothing happens. Which of the following is MOST likely the cause?

Question162: A user takes a tablet to a technician because the cursor on it keeps drifting. The technician notices the screen does not appear to be damaged. Which of the following is the MOST likely cause of the cursor issue?

Question163: A help desk technician has been tasked with installing an IP phone in a small office with an unmanaged switch. When connected to an RJ45 receptacle, the phone does not boot. Which of the following is the QUICKEST way to resolve this issue?

Question164: A technician installed a Cat 5 UTP cable approximately 275ft (84m) from a network switch in an office to a workstation located on a factory floor The technician sees both a flashing green LED and a flashing orange LED on the workstation's NIC. Which of the following should the technician do FIRST?

Question165: A user submitted a ticket to report an issue with a new printer that is no longer accepting new print jobs. The technician verifies the printer is on and notices the printer LCD screen has the following error message:
Paper Jam, Jam in fuser.
Which of the following is the MOST efficient next step the technician should complete?

Question166: A technician needs to ensure all data communications on all network devices are encrypted when logging in to the console. Which of the following protocols should the technician enable?

Question167: A technician needs to configure a multifunction printer that will be used to scan highly confidential data, which must be securely distributed to a select group of executives. Which of the following options is the most secure way to accomplish this task?

Question168: A technician is troubleshooting intermittent fuzzy video on a computer using a VGA to DisplayPort adapter to connect to a monitor. The monitor with a VGA connector was previously working tine for another user. The technician replaces the adapter; however, the issue persists. Which of the following should the technician do NEXT?

Question169: A user sends a print job lo a network printer, and the print job uses double the amount of paper as expected.
Which of the following should the user configure to get the expected result?

Question170: Which of the following services allows a remote user to access network resources?

Question171: A user needs to connect a laptop to the internet while traveling on a train. Which of the following features should be enabled on the user's phone?

Question172: A company's RAID array has degraded performance and a blinking red light on one of the bays. Which of the following should a technician replace?

Question173: A user tries to connect a monitor to a laptop to have an additional screen for work, but both screens show the same content. Which of the following should the user do to resolve the issue?

Question174: Which of the following is an isolated virtual machine?

Question175: Upon booting a workstation, a technician hears a distinct clicking sound after power is applied to the motherboard. Which of the following would MOST likely be the cause?

Question176: An administrator is setting up a conference room for an important board of directors meeting. The chief operating officer has asked the administrator to make sure a redundant internet connection is available. The office only has one ISP. and the conference room equipment is currently configured using Ethernet. Which of the following should the administrator set up in order to ensure redundancy?

Question177: A help desk technician receives a ticket stating a printer has jammed several times today. The technician removes the jammed paper and notices the paper supply is low and the paper in the tray is wrinkled. Which of the following MOST likely caused the paper jams?

Question178: A virtual file server in the cloud is configured to automatically add compute resources during times of high load on the server. Which of the following describes this cloud feature?

Question179: A user is unable to hear sound from a laptop. However, the user can hear sound when connected to a Bluetooth headset. Which of the following actions would most likely resolve the issue?

Question180: A customer is using a satellite internet connection that is experiencing slowness. A technician notices high latency while pinging, but the download test is performing perfectly with very good download speeds. Which of the following represents the NEXT action the technician should perform?

Question181: Which of the following would MOST likely be used to obtain electronic images of a large number of printed documents?

Question182: Which of the following controls the flow of users connecting to web server farms and prevents overutilization on any individual server?

Question183: A user is unable to access the internet on a PC. A technician examines the PC and runs the following commands:

Which of the following steps in the troubleshooting process does this series of commands represent?

Question184: Which of the following commonly uses NFC?

Question185: A technician is troubleshooting a computer that has a loud system fan and randomly freezes and reboots.
Which of the following is the most likely cause of these issues?

Question186: A systems administrator is attempting to resolve a ticket regarding an issue with an email server. The administrator is covering for a coworker who was previously working on the ticket. The coworker already gathered facts about the issue and spoke with users concerning their missing emails. The coworker also discovered the email server's retention policy was updated shortly before users first noticed the issue. Which of the following should the systems administrator do NEXT to resolve the email issue?

Question187: A technician is installing a new high-end graphics card that uses a 12VHPWR connector. Which of the following is the maximum wattage supported by this power connector?

Question188: A user submits a help desk ticket regarding a smartphone that will no longer accept its charging cable. The assigned technician notices the phone does not have a protective case, and the user constantly transport the phone in a pocket. The technician attempts to use a secondary charger, but the cable falls out of the phone.
Which of the following is the MOST likely cause of the issue?

Question189: A technician assembled a new PC. After a few minutes, the computer slows down and then shuts itself off.
Which of the following is the most likely cause of the failure?

Question190: A customer brings a phone top a repair shop because it is experiencing extreme slowness and applications are crashing. A technician attempts to install a diagnostic application. but the installation fails. Which of the following should the technician do FIRST to troubleshoot the issue?

Question191: A technician is trying to fix a computer that fails to boot even when all the RAM is removed. Which of the following should the technician do next to troubleshoot the issue?

Question192: A company needs to keep a record of tasks performed by an application. Which of the following should the company most likely implement as part of a solution?

Question193: A user keeps a company-provided camera's battery charger plugged into a docking station at a desk. Company policy requires that USB devices be identified and approved by installed peripheral security software. A technician is unable to add a unique identifier to the battery charger's security software. Which of the following should the technician do?

Question194: A user reports a monitor, keyboard, mouse, and headset are no longer functioning. The user has restarted the laptop and tested an alternative headset and monitor, but the issue persists. The technician notices the user has a printer, USB-C hub, and AC adapter plugged into the laptop. Which of the following should the technician do to most likely resolve the issue?

Question195: Which of the following cables provides the best performance with the least EMI?

Question196: A user's device needs more memory, so a technician installs extra RAM with the following specifications
2 x8Gb DDR3-1066(PC3-S500) 1 x 16Gb DDR3-1333 (PC3-10600)
Which of the following speeds would maximize reliability?

Question197: Which of the following display types is available for laptops?

Question198: To which of the following should a technician connect individual pairs of a Cat 6 cable in order to provide a connection to a switch?

Question199: Which of the following devices would a punchdown tool most likely be utilized on?

Question200: A technician is installing a storage solution for a computer that requires data redundancy with the fewest drives possible. Which of the following would best meet this requirement?

Question201: A user tries to turn on a computer but gets the following error message: Bootable device not found. The computer had no issues yesterday Which of the following is the most likely reason for this error?

Question202: Which of the following describes the main difference between T568A and T568B cabling standards?

Question203: A technician is upgrading the memory on a server that processes payment information online. Which of the following types of memory would the technician most likely install?

Question204: An insurance company wants to implement cloud computing and would like a cloud solution in which the infrastructure is shared with businesses in the same industry. Which of the following cloud models BEST addresses the company's need?

Question205: Which of the following is used to implement network security polices for an environment?

Question206: A company needs to secure remote user data with minimal interaction. Which of the following should the company do?

Question207: In a SOHO environment, a user wants to make sensitive, scanned documents available to other users on the domain. The logs need to indicate who accessed the documents and at what time they were accessed. Which of the following settings should a technician set up on the MFP device?

Question208: Which of the following components houses the MX record?

Question209: A technician is troubleshooting a workgroup printer that has stopped printing after several days of heavy use.
The technician runs the diagnostic tool in the printer's administrator menu. Which of the following issues is the technician most likely to encounter?

Question210: A user regularly travels to multiple sites to take pictures with a mobile device and transfers those pictures to a computer via a removable SD card. Recently, the SD card was damaged and had to be replaced. Now, the user is unable to save pictures to the new SD card. Which of the following should the user verify first so pictures can be saved to the SD card?

Question211: A user plugs in a laptop to the corporate network and the laptop is automatically assigned an IP address.
Which of the following server types was used to assign the IP address?

Question212: A user calls the help desk lot assistance configuring an Android phone with a new NFC-enabled speaker that will be used for an upcoming conference call. The user was unable to direct the phone's audio to the NFC speaker. Which of the following sequences should the help desk technician walk the customer through to accomplish this task?

Question213: Which of the following server types can dynamically assign primary and secondary DNS?

Question214: Which of the following technologies can allow multiple networks to traverse a switch?

Question215: After a required operating system upgrade on a mobile deuce, a user's external monitor no longer works.
Which of the following should a technician do to fix this issue?

Question216: A technician is preparing a redesigned conference room for a presentation. The presenter connects a laptop to the LCD projector, but a "No input source" error message is displayed on the LCD projector's screen.
However, the presentation is working on the laptop's LCD screen when in mirroring mode on the docking station. Which of the following troubleshooting steps should the technician take first?

Question217: A technician just finished assembling a new PC for a client. Upon POST, the device presents an unspecified beep code and turns off automatically after five seconds. The technician double-checks the bill of materials for the new build and confirms all items have been installed. Which of the following should the technician do NEXT?

Question218: Which of the following would be BEST reason to use a virtual machine as a sandbox?

Question219: Which of the following models is an example of metered utilization?

Question220: A technician receives a call from a user about a new USB 3.1 docking station. The user claims that their laptop does not charge when connected to the dock. The user confirms that the AC adapter for the dock is plugged in. Which of the following is the most likely cause?

Question221: A user reports that a display is slow to turn on, and the colors are distorted and discolored. Once the display turns on, it appears to have lines going through the image and intermittently goes blank. Which of the following is the most likely cause of the issue?

Question222: After a heavily used color laser printer was serviced to remove excessive dust, the image quality decreased.
Which of the following should a technician most likely check on the printer?

Question223: Which of the following DNS records is used to point to a mail server?

Question224: A user connects a smartphone to a laptop. Which of the following types of networks has the user created?

Question225: An IT specialist sets up a wireless router in a SOHO environment. Afterwards, several devices cannot access the internet and are assigned IP addresses starting with 169.254. Which of the following is the best action to resolve this issue?

Question226: Which of the following should the label on a network jack faceplate refer to?

Question227: A small office has a wireless network with several access points for roaming laptop use. Users occasionally report that the wireless connection drops or becomes very slow. Users have confirmed that this issue only happens when connected to the office wireless network. Which of the following would MOST likely be the cause?

Question228: A technician is troubleshooting a classroom projector that shuts down after fifteen minutes of use. Which of the following should the technician do to resolve the issue?

Question229: Which of the following is the maximum distance Cat 5, Cat 5e, Cat 6, and Cat 6a cables can be ran?

Question230: A user is unable to connect to network resources. A technician discovers that the user's device has an invalid static IP v dress. Which of the following should the technician configure on the user's device to request an IP address?

Question231: A technician needs to upgrade the power supply of a workstation that contains a high-end graphics card, 16 hyperthreaded cores, and multiple hard drives. Which of the following should the technician use to determine the appropriate power supply for the workstation?

Question232: A graphic designer wants to upgrade to the fastest possible RAM for a desktop workstation. Which of the following types of RAM would be best for the designer to use?

Question233: A user is printing a part with a thermoplastic polyurethane (TPU) filament on a 3-D printer. The first layer on every print job is not adhering properly.
Which of the following should the user do to improve adherence on the first layer?

Question234: A user reports that files are taking hours to transfer from a device to an external USB drive. The technician confirms that the device's cables are connected and the correct USB port is being used. Which of the following steps should the technician take next when troubleshooting the issue?

Question235: A user has been unable to configure a smart device to play audio on a new Bluetooth speaker. A technician confirms that Bluetooth is enabled on both devices. Which of the following should the technician do to ensure the pairing is successful?

Question236: A startup is looking to immediately expand its data center but does not have the personnel or space to manage everything internally. The organization has multiple small offices and remote users with large computational and storage-solution requirements. Funding is not an issue for the company. Which of the following can BEST accomplish the company's goals?

Question237: A company has a dot matrix printer that uses carbon paper. The company reports that the first page is printing too light, although the following pages are still legible. Which of the following MOST likely needs to be fixed?

Question238: Which of the following cables should be used to terminate ST connectors on each end?

Question239: A customer reports a network connectivity issue. A technician discovers that LAN ports have been damaged during remodeling. Which of the following tools should the technician use to fix the issue?

Question240: A user reports a tablet restarts on its own every five to ten minutes. In addition, the tablet has intermittent issues with charging. The technician gives the user a new power adapter and charging cable, and the technician also tries resetting the OS. but the issue persists. Which of the following is the MOST likely cause of the issue?

Question241: Which of the following is the primary function of a DNS service?

Question242: A technician is installing a WAP in the company break room. The new access point should have a rating of higher than 50Mbps and minimal range to avoid interference with other access points. Which of the following
802.11 standards should the technician select?

Question243: Some users are unable to access resources on the file server. A technician reviews the server network information and finds the following settings:

Which of the following is the most likely explanation?

Question244: A user reports that a display is slow to turn on, and the colors are distorted and discolored. Once the display turns on, it appears to have lines going through the image and intermittently goes blank. Which of the following is the most likely cause of the issue?

Question245: Client-side virtualization guest machines have security requirements similar to physical machines, but they also need to ensure separation from other guest machines. Which of the following BEST describes this client- side guest security requirement?

Question246: A company wants to get the fastest network speeds possible between nearby locations. If all technologies are available, which of the following connection types should the company use?

Question247: Users working with large files back up the files to external hard drives. One user's files take longer to back up than other users' files. The user has tried backing up the files to other users' drives with the same results.
Which of the following steps should the technician take first to correct this issue?

Question248: A technician configured a new SOHO router for a small business. The ISP gave the technician an IP address on the router's WAN port. Which of the following addresses did the technician most likely configure on the router?

Question249: A security team wants to implement compliance controls that only permits the installation of company- approved software on user laptops. Which of the following should the IT department deploy?

Question250: A technician unboxed a new computer, plugged it in to a UPS. and connected the requested peripherals. The computer lights and fans turn on, but the technician hears three loud, consecutive beeps during boot. Which of the following actions will remediate the issue?

Question251: Which of the following wireless technologies would a company most likely implement for inventory management?

Question252: A technician is configuring a desktop RAID to allow for the best I/O performance and the most storage capacity possible. Which of the following RAID types should the technician use?

Question253: A user's mobile phone gets really hot to the touch and does not retain a charge. The user also reports that the phone is very slow, especially while charging. Which of the following is MOST likely causing these symptoms?

Question254: A technician builds a custom computer for a customer, installing a high-end video card that draws 550W at maximum load. After a day of using the computer, the customer notices video loss and a burning smell.
Which of the following should the technician troubleshoot first?

Question255: Which of the following best describes metered utilization for cloud computing?

Question256: A user is unable to connect a mobile phone while in a car. However, a second mobile Device is able To connect in The same car, WHICH of the Following settings should the user check on the first phone?

Question257: A technician is troubleshooting a user's laptop that randomly turns off. The technician disassembles the laptop and notices that various pieces of small sticker paper within the device have changed color from red to blue.
Which of the following is the most likely cause of the laptop's issues?

Question258: Which of the following standards supports MIMO technology?

Question259: A technician is trying to set up a computer to dual boot from both Windows and Linux. The technician believes that a setting is preventing the computer from accessing the flash drive with the OS image prior to loading the OS. Which of the following settings should the technician check?

Question260: A user has been having issues charging a laptop after turning it on and has noticed the laptop screen is dim.
Which of the following components most likely needs to be replaced?

Question261: A technician is receiving reports that the entire office sporadically loses network connectivity throughout the day. The technician determines the root cause to be EMI. Which of the following cable mediums would be the MOST cost effective without sacrificing system performance?

Question262: An office manager reports that a printer is experiencing performance issues. Printouts are smudging when they are handled, and. recently, whenever the manager tries to print oversized documents, the paper jams before anything is printed on it.

Question263: A user uploads a file to a storage location that is accessible via a web browser and a client application. The user's coworkers can access the file as well. The service that the file is stored with is provided by a third party for a monthly fee. The third party's service is available to any business or consumer who would like to use the service. Which of the following BEST describes the type of service that is in use?

Question264: A systems administrator hears a clicking noise coming from a storage array that has a RAID configuration_ No LEOS are illuminated on the array but the logs show several hard drive errors. Which of the following should the systems administrator do to quickly eliminate the clicking?

Question265: When a user tries to print a document on a laser printer, vertical lines appear on the printout. Which of the following should the technician replace?

Question266: Which of the following cloud models exclusively utilizes a local data center?

Question267: Which of the following frequency bands do 802.11b and 802.11g operate in?

Question268: When a user touches or swipes across an external touch screen, the image flickers but no input is registered on the presentation laptop. Atechnician verifies that the external touch screen appears free from physical damage.
Which of the following should the technician do next?

Question269: Which of the following cloud service models is most likely to provide application patching?

Question270: Which of the following should the data center hardware technician implement to ensure maximum uptime for customers' virtual machines?

Question271: A user's phone does not respond to touch. A technician inspects the phone but does not see any evidence of physical damage. The technician restarts the device, which does not fix the issue. Which of the following components should the technician examine next?

Question272: An administrator is replacing 15,000rpm hard drives in a server. Which of the following is the interface type the drives most likely use?

Question273: A technician is setting up three web servers foe a retail company that takes online orders for its products.
Which of the following network host services should the technician use to ensure the servers' resources will be utilized efficiently?

Question274: A user is having trouble accessing files on the network. A technician suspects the issue is a result of a failed NIC_ Which of the following steps should the technician take to troubleshoot this issue?

Question275: A technician is preparing to set up a gaming computer with the following components:
* Discrete, high-end graphics card
* Video capture card
* High-end processor
* Multiple hard drives
* USB 3.0 hub
* Sound card
Which of the following options is the MOST important for the technician to consider before building the gaming computer?

Question276: Which of the following 802.11 standards supports both 5GHz and 2.4GHz channel frequencies?

Question277: A customer recently installed a new graphics card, but the card's HDMI port is not getting a signal when connected to the monitor. When the monitor is connected to the original HDMI port, located next to the USB ports, everything works as expected. Which of the following should the technician do next?

Question278: An administrator is using an RJ45 connector to terminate a network cable. Which of the following cables is the administrator terminating?

Question279: A technician just finished building a new PC and needs to install a firmware update for the system board UEFI. The technician is experiencing issues while accessing the USB key. Which of the following features should the technician most likely disable in order to complete this task?

Question280: Which of the following technologies can be used to connect a home PC to a company's network?

Question281: A technician is configuring the BIOS of a new workstation. The machine will be used for data analytics, and the technician would like to maximize the performance of the CPU. Which of the following BIOS settings should the technician verify?

Question282: A technician is selling up a projector (or a videoconferencing system. When the user all empts to connect a laptop to the system, the system displays the following error message.
No source found
The user tries multiple cables and inputs on the projector. Which of the following should the user try NEXT?

Question283: A company laptop uses a docking station with an integrated NIC and is unable to access a wired SOHO network using DHCP. A technician runs ipconfig anddiscovers the laptop has an IPv4 assignment of
169.254.0.9. The NIC does not have any link or activity lights on. Which of the following should the technician do next?

Question284: A technician is working on a help desk ticket for a user who wants the filament replaced in a 3-D printer.
Which of the following should the technician do to remove the old filament and load the new one?

Question285: A technician receives an alert indicating all VMs are down. After some troubleshooting, the technician discovers the network is out of space. To resolve the issue, the technician decides to add more space. Which of the following network types will the technician be working with?

Question286: A customer is having an issue printing documents. The customer can print a text document without any issue.
However, when the customer prints a PDF containing images, the job fails and no other jobs will run until the computer is rebooted. Which of the following is the most likely cause of the issue?

Question287: A company uses vital legacy software that does not run in the current OS version Which of the following will best support the software while keeping the OS current?

Question288: A laptop's wireless speed has been very slow since a new router was installed The user thinks the issue is because the router is misconfigured Which of the following should a technician do first to diagnose this issue?

Question289: A technician is troubleshooting a phone with limited internet connectivity. The technician has identified the phone on the Wi-Fi network and confirmed that it responds to pings. However, the phone is still unable to open comptia.org. Which of the following should the technician check next?

Question290: When a page that was printed on a laser printer is touched. the image on the paper smears. Which of the following is most likely the cause of this issue?

Question291: Each lime a user ties to print, the paper becomes stuck at the last stage of the print job and the user has to poll me paper out of the printer. Which of the following is me most likely cause?

Question292: Which of the following best describes the type of cloud a healthcare company should use for a patient record portal?

Question293: After an IT department implements SSL redirection, users report being unable to access a random number generator opened within a web browser. Which of the following should a technician do first to troubleshoot this issue?

Question294: In which of the following cloud models is the customer not responsible for hardware and OS layers but is responsible for the data and the application?

Question295: A company has implemented a policy that allows employees to use personal devices to perform work duties.
Which of the following policies should the technician activate to protect company information?

Question296: A company is designing a data center environment where a critical requirement is highly available computing.
Which of the following types of memory should an administrator choose to install in the servers?

Question297: Which of the following describes the BEST use case for a client-side hypervisor?

Question298: Which of the following network devices is used to separate broadcast domains?

Question299: A laser printer, which is located in a large office, has a leaky toner cartridge. Some toner spilled into the printer when the cartridge was removed.
Which of the following is the best way to clean up the toner?

Question300: A desktop support technician receives an escalated ticket regarding a computer that displays the following message upon booting up: The amount of system memory has changed. Which of the following components is failing?

Question301: A user who is facilitating a videoconference reports that the participants can be heard. However, when the user attempts to speak, none of the participants can hear the user. Which of the following is the FIRST step the technician should take?

Question302: Which of the following network devices is needed to direct packets to networks outside of the LAN?

Question303: In which of the following places is a laptop's wireless antenna MOST likely located?

Question304: A technician just finished building a new PC and needs to install a firmware update for the system board UEFI. The technician is experiencing issues while accessing the USB key. Which of the following features should the technician most likely disable in order to complete this task?

Question305: A user is reporting that a computer has been very slow in recent days. The technician looks into the problem and finds pop-ups are randomly appearing on the screen. Which of the following is the next step the technician must take?

Question306: A technician is working with a user to set up scanning. The user requires the scans to be viewable on the network for the entire department. Which of the following settings on the MFP should the technician edit to BEST address the user's request?

Question307: A systems administrator is working to ensure access to corporate laptops is limited to authorized users. The administrator has already implemented a password policy. Which of the following would be the best option to help the administrator secure the corporate resources?

Question308: A user is experiencing a log-on issue when attempting to use a network-authenticated application in a corporate environment. The technician successfully resolves the issue by resetting the password. The user confirms that everything is working as expected. Which of the following steps should the technician take next?

Question309: Which of the following provides the highest level of isolation from the host operating system?

Question310: A field technician for an airport receives a support ticket that states customers are having issues viewing a screen that displays information about departing flights. While checking the case history, the technician sees that all flight information screens were recently moved when the terminal gates were remodeled. Which of the following actions should the technician perform after verifying the screen has power?

Question311: A user wants to create a VM on a computer. Which of the following should the user check first?

Question312: A user complains that print jobs remain in the printer queue. A technician sends a ping command to the printer, and the printer replies successfully. The paper trays are full, and toner levels are okay. Which of the following is a reason the print jobs are getting stuck in the queue?

Question313: An administrator is configuring a corporate-owned smartphone for a new manager. The company requires the ability to wipe the phone's data remotely in the event of loss or theft and the capability to approve applications installed on the phone. Which of the following tools would BEST meet this need?

Question314: A technician installed a new router at a small office. After the Installation, the technician notices that all devices have a I69.254.x.x IP address. Printers and fileshares are still working, but PCs cannot access the Internet. Which of the following should the technician configure on the router to enable devices to connect to the internet?

Question315: A user reports poor performance on the application server.
INSTRUCTIONS
Click on Server 1 and Server 2 and review the information presented in each chart to determine which drives need to be replaced.
Select the appropriate replacement drive that should be used, for the least performance degradation to the server.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

Question316: A user needs a technician's help connecting a laptop to a projector The projector is old and only has analog input. Which of the following cable types should the technician use to connect the laptop to the proJector?

Question317: An organization has some computers running macOS and some computers running Windows. The computers running macOS also need to run a piece of software that is only available on Windows. Which of the following BEST describes the solution for running Windows software on a computer running macOS?

Question318: A technician is monitoring all outbound traffic in a SOHO. Which of the following is the MOST cost- effective solution to monitor the traffic?

Question319: An organization keeps receiving spam that appears to come from its own domain No accounts have been compromised. Which of the following will BEST mitigate this issue?

Question320: A salesperson is unable to use a personal device to access emails and calendar features at a client site but was able to use the device while at the office. Which of the following policies has been enforced on the salesperson's mobile device?

Question321: A user failed to gain access to a building's entrance after security measures at the entrance were upgraded last week. The company implemented the 13.56MHz frequency short band, and users can now utilize their mobile devices to authenticate. Which of the following has to be enabled for the mobile device to authenticate?

Question322: Users have been reporting slow network traffic in a branch office, and the technician needs to determine if packet loss is occurring on the network. Which of the following would the technician most likely use to passively assess the network traffic issue?

Question323: An engineer is building a workstation that requires the following components:
An ATX motherboard
A multi-core processor
A dedicated graphics solution
A SATA hard drive
DDR4 memory
Which of the following power supply specifications would meet the workstation criteria?

Question324: A company wants to save money by leveraging the cloud while still being able to customize the infrastructure.
Which of the following cloud models
would best address the company's needs?

Question325: A technician responds to a help desk ticket that indicates a user's workstation is not booting. The technician initially suspects a failed hard drive. The technician performs diagnostics and confirms the hard drive is fully operational.
Which of the following steps should the technician complete NEXT?

Question326: Multiple organizations are working together on a project and want to migrate the data to the cloud. Which of the following cloud models should be used?

Question327: A user called the help desk to request assistance with selecting appropriate storage to back up a large collection of DVDs and photos in the most economical way. Which of the following should the help desk recommend?

Question328: Which of the following is a benefit of using a VLAN?

Question329: A technician is connecting a hands-free car system via Bluetooth. Which of the following is a security feature that should be used for this task?

Question330: A technician is tasked with installing additional RAM in a desktop computer. Which of the following types of RAM is MOST likely to be used?

Question331: A company in a large building uses a wireless network for its workstations. After a new company moves into the building on the floor below, the old company's wireless network begins experiencing connectivity Issues.
Which of the following is the most likely cause?

Question332: A user added a heater underneath a desk, and now an external monitor is not working. A technician verified the monitor gets power. Which of the following should the technician do next?

Question333: A technician is configuring a new CAD workstation that has four large hard drives. The workstation will be used to edit large, critical files, so the storage configuration should be both fast and redundant. Which of the following RAID levels BEST meets these requirements?

Question334: A user needs to upgrade a PC in order to run the latest 3-D design software. Which of the following components should the user upgrade to best meet this requirement?

Question335: A user acquired a new workstation and is attempting to open multiple targe Excel files simultaneously. The user is not experiencing the expected performance when executing such large requests. Which of the following should a technician do FIRST?

Question336: A financial institution needs a secure way to protect encryption keys used for unlocking chips on its credit cards Which of the following should the institution use?

Question337: A company wants to use client-side visualization for application testing. Which of the following configurations would BEST support this goal?

Question338: A technician is troubleshooting a network issue. Users report that the connection keeps dropping and reconnecting every few seconds. The technician:
Verifies the network configuration settings are correct on the workstation Tests the network cable from the workstation to the switch and finds no issues Uses a known-good workstation on the existing network cable and replicates the reported issue Which of the following should the technician do next?

Question339: A company wants to give third-party developers access to the corporate network through desktop environments that the company can control. Which of the following can BEST achieve these requirements?

Question340: A technician is working with a vendor to resolve an issue that a user reported. The vendor indicates that the technician's next step is to update the firmware. Which of the following is the most important step the technician should take before proceeding?

Question341: Which of the following is the SAFEST way to replace RAM on a server that has a redundant power supply?

Question342: A technician is setting up a video-editing workstation and the operating system is already installed on an internal M.2 drive.
The new workstation must meet the following requirements:
* Be able to edit files at the fastest speed
* Allow for disk failure without any downtime
* Have 2TB of usable space
* Ensure the most robust fault tolerance
INSTRUCTIONS
Use the drop-down menus to select the appropriate RAID level, drive types, and drive sizes based on the requirements above. For each drive type that is selected, a corresponding drive size must also be selected.

Question343: A user with a custom hosts file is having difficulty connecting to a locally hosted site on a small office network. The technician cannot ping the server hostname from the user's computer. Which of the following should the technician ensure on the server?

Question344: A technician is setting up a laptop with an encrypted hard drive. The laptop will securely store a PIN that the user will input at log-on. Which of the following must be installed to set up this configuration?