EMT Practice Test

1. Question Content...

---

Question1: Which of the following encryption methodologies would MOST likely be used to ensure encrypted data cannot be retrieved if a device is stolen?

Question2: A technician is connecting a server's secondary NIC to a separate network. The technician connects the cable to the switch but then does not see any link lights on the NIC. The technician confirms there is nothing wrong on the network or with the physical connection. Which of the following should the technician perform NEXT?

Question3: A server technician has received reports of database update errors. The technician checks the server logs and determines the database is experiencing synchronization errors. To attempt to correct the errors, the technician should FIRST ensure:

Question4: A server administrator has configured a web server. Which of the following does the administrator need to install to make the website trusted?

Question5: Which of me following BEST describes a disaster recovery site with a target storage array that receives replication traffic and servers that are only powered on In the event of a disaster?

Question6: Which of the following DR testing scenarios is described as verbally walking through each step of the DR plan in the context of a meeting?

Question7: Which of the following must a server administrator do to ensure data on the SAN is not compromised if it is leaked?

Question8: A server is reporting a hard drive S.M.A.R.T. error. When a technician checks on the drive, however, it appears that all drives in the server are functioning normally. Which of the following is the reason for this issue?

Question9: Which of the following allows for a connection of devices to both sides inside of a blade enclosure?

Question10: Which of the following techniques can be configured on a server for network redundancy?

Question11: A technician needs to provide a VM with high availability. Which of the following actions should the technician take to complete this task as efficiently as possible?

Question12: A server technician is installing a new server OS on legacy server hardware. Which of the following should the technician do FIRST to ensure the OS will work as intended?

Question13: A user reports that a server is not accessible. A technician sees the following message on the server: PXE server not found. Which of the following should the technician attempt FIRST to resolve the issue?

Question14: A snapshot is a feature that can be used in hypervisors to:

Question15: A server room with many racks of servers is managed remotely with occasional on-site support. Which of the following would be the MOST cost-effective option to administer and troubleshoot network problems locally on the servers?

Question16: A server administrator needs to create a new folder on a file server that only specific users can access. Which of the following BEST describes how the server administrator can accomplish this task?

Question17: A company deploys antivirus, anti-malware, and firewalls that can be assumed to be functioning properly. Which of the following is the MOST likely system vulnerability?

Question18: Which of me following is the BEST action to perform before applying patches to one of the hosts in a high availability cluster?

Question19: A server administrator needs to deploy five VMs, all of which must have the same type of configuration. Which of the following would be the MOST efficient way to perform this task?

Question20: A company wants to deploy software to all users, Out very few of men will be using the software at any one point in time. Which of the following licensing models would be BEST lot the company?

Question21: A technician is laying out a filesystem on a new Linux server. Which of the following tools would work BEST to allow the technician to increase a partition's size in the future without reformatting it?

Question22: Winch of the following is a type of replication in which all files are replicated, all the time?

Question23: A server administrator added a new drive to a server. However, the drive is not showing up as available. Which of the following does the administrator need to do to make the drive available?

Question24: A server administrator is swapping out the GPU card inside a server. Which of the following actions should the administrator take FIRST?

Question25: A systems administrator has noticed performance degradation on a company file server, and one of the disks on it has a solid amber light. The administrator logs on to the disk utility and sees the array is rebuilding. Which of the following should the administrator do NEXT once the rebuild is finished?

Question26: A server administrator is using remote access to update a server. The administrator notices numerous error messages when using YUM to update the applications on a server. Which of the following should the administrator check FIRST?

Question27: A recent power Outage caused email services to go down. A sever administrator also received alerts from the datacenter's UPS.
After some investigation, the server administrator learned that each POU was rated at a maximum Of 12A.
INSTRUCTIONS
Ensure power redundancy is implemented throughout each rack and UPS alarms are resolved.
Ensure the maximum potential PDU consumption does not exceed 80% or 9.6A).
a). PDU selections must be changed using the pencil icon.
b). VM Hosts 1 and 2 and Mail Relay can be moved between racks.
c). Certain devices contain additional details

Question28: A systems administrator deployed a new web proxy server onto the network. The proxy server has two interfaces: the first is connected to an internal corporate firewall, and the second is connected to an internet-facing firewall. Many users at the company are reporting they are unable to access the Internet since the new proxy was introduced. Analyze the network diagram and the proxy server's host routing table to resolve the Internet connectivity issues.
INSTRUCTIONS
Perform the following steps:
1. Click on the proxy server to display its routing table.
2. Modify the appropriate route entries to resolve the Internet connectivity issue.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

Question29: Which of the following would MOST likely be part of the user authentication process when implementing SAML across multiple applications?

Question30: A technician is checking a server rack. Upon entering the room, the technician notices the tans on a particular server in the rack are running at high speeds. This is the only server in the rack that is experiencing this behavior. The ambient temperature in the room appears to be normal. Which of the following is the MOST likely reason why the fans in that server are operating at full speed?

Question31: When configuring networking on a VM, which of the following methods would allow multiple VMs to share the same host IP address?

Question32: A very old PC is running a critical, proprietary application in MS-DOS. Administrators are concerned about the stability of this computer. Installation media has been lost, and the vendor is out of business. Which of the following would be the BEST course of action to preserve business continuity?

Question33: Which of the following can be used to map a network drive to a user profile?

Question34: An administrator needs three distinct security zones in a company's network. Which of the following is the administrator MOST likely to implement?

Question35: A technician has been asked to check on a SAN. Upon arrival, the technician notices the red LED indicator shows a disk has failed. Which of the following should the technician do NEXT, given the disk is hot swappable?

Question36: A technician wants to limit disk usage on a server. Which of the following should the technician implement?

Question37: Which of the following BEST measures now much downtime an organization can tolerate Curing an unplanned outage?

Question38: A server administrator mounted a new hard disk on a Linux system with a mount point of /newdisk. It was later determined that users were unable to create directories or files on the new mount point. Which of the following commands would successfully mount the drive with the required parameters?

Question39: Which of the following should an administrator use to transfer log files from a Linux server to a Windows workstation?

Question40: A USB drive has been purchased to move files between Windows, *nix, and Macintosh servers. Which of the following filesystems is the BEST choice to ensure the drive can read and be written to by all of the servers?

Question41: A technician is attempting to reboot a remote physical Linux server. However, attempts to command a shutdown -----now result in the loss of the SSH connection. The server still responds to pings. Which of the following should the technician use to command a remote shutdown?

Question42: A server administrator is configuring a new server that will hold large amounts of information. The server will need to be accessed by multiple users at the same time. Which of the following server roles will the administrator MOST likely need to install?

Question43: Network connectivity to a server was lost when it was pulled from the rack during maintenance. Which of the following should the server administrator use to prevent this situation in the future?

Question44: A server administrator is completing an OS installation for a new server. The administrator patches the server with the latest vendor-suggested software, configures DHCP, and verifies all network cables are properly connected in the IDF, but there is no network connectivity. Which of the following is the MOST likely reason for the lack of connectivity?

Question45: A technician is configuring a server that requires secure remote access. Which of the following ports should the technician use?

Question46: Hosting data in different regional locations but not moving it for long periods of time describes:

Question47: Which of the following is an example of load balancing?

Question48: A technician is trying to determine the reason why a Linux server is not communicating on a network. The returned network configuration is as follows:
eth0: flags=4163<UP, BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 127.0.0.1 network 255.255.0.0 broadcast 127.0.0.1
Which of the following BEST describes what is happening?

Question49: A server in a remote datacenter is no longer responsive. Which of the following is the BEST solution to investigate this failure?