EMT Practice Test

1. Question Content...

---

Question1: You need to ensure your personal SSH key works on every instance in your project. You want to accomplish this as efficiently as possible.
What should you do?

Question2: You want to apply a new Cloud Armor policy to an application that is deployed in Google Kubernetes Engine (GKE). You want to find out which target to use for your Cloud Armor policy.
Which GKE resource should you use?

Question3: You want to configure a NAT to perform address translation between your on-premises network blocks and GCP.
Which NAT solution should you use?

Question4: You are designing a shared VPC architecture. Your network and security team has strict controls over which routes are exposed between departments. Your Production and Staging departments can communicate with each other, but only via specific networks. You want to follow Google- recommended practices.
How should you design this topology?

Question5: You work for a university that is migrating to GCP.
These are the cloud requirements:
* On-premises connectivity with 10 Gbps
* Lowest latency access to the cloud
* Centralized Networking Administration Team
New departments are asking for on-premises connectivity to their projects. You want to deploy the most cost-efficient interconnect solution for connecting the campus to Google Cloud.
What should you do?

Question6: You work for a multinational enterprise that is moving to GCP.
These are the cloud requirements:
* An on-premises data center located in the United States in Oregon and New York with Dedicated Interconnects connected to Cloud regions us-west1 (primary HQ) and us-east4 (backup)
* Multiple regional offices in Europe and APAC
* Regional data processing is required in europe-west1 and australia-southeast1
* Centralized Network Administration Team
Your security and compliance team requires a virtual inline security appliance to perform L7 inspection for URL filtering. You want to deploy the appliance in us-west1.
What should you do?

Question7: You are deploying a global external TCP load balancing solution and want to preserve the source IP address of the original layer 3 payload.
Which type of load balancer should you use?

Question8: After a network change window one of your company's applications stops working. The application uses an on-premises database server that no longer receives any traffic from the application. The database server IP address is 10.2.1.25. You examine the change request, and the only change is that 3 additional VPC subnets were created. The new VPC subnets created are 10.1.0.0/16, 10.2.0.0/16, and 10.3.1.0/24/ The on-premises router is advertising 10.0.0.0/8.
What is the most likely cause of this problem?

Question9: You need to create a GKE cluster in an existing VPC that is accessible from on-premises. You must meet the following requirements:
IP ranges for pods and services must be as small as possible.
The nodes and the master must not be reachable from the internet.
You must be able to use kubectl commands from on-premises subnets to manage the cluster.
How should you create the GKE cluster?

Question10: You are increasing your usage of Cloud VPN between on-premises and GCP, and you want to support more traffic than a single tunnel can handle. You want to increase the available bandwidth using Cloud VPN.
What should you do?

Question11: You decide to set up Cloud NAT. After completing the configuration, you find that one of your instances is not using the Cloud NAT for outbound NAT.
What is the most likely cause of this problem?

Question12: You have an application running on Compute Engine that uses BigQuery to generate some results that are stored in Cloud Storage. You want to ensure that none of the application instances have external IP addresses.
Which two methods can you use to accomplish this? (Choose two.)

Question13: You have a storage bucket that contains two objects. Cloud CDN is enabled on the bucket, and both objects have been successfully cached. Now you want to make sure that one of the two objects will not be cached anymore, and will always be served to the internet directly from the origin.
What should you do?

Question14: You are configuring a new instance of Cloud Router in your Organization's Google Cloud environment to allow connection across a new Dedicated Interconnect to your data center Sales, Marketing, and IT each have a service project attached to the Organization's host project.
Where should you create the Cloud Router instance?

Question15: You have a storage bucket that contains the following objects:
- folder-a/image-a-1.jpg
- folder-a/image-a-2.jpg
- folder-b/image-b-1.jpg
- folder-b/image-b-2.jpg
Cloud CDN is enabled on the storage bucket, and all four objects have been successfully cached. You want to remove the cached copies of all the objects with the prefix folder-a, using the minimum number of commands.
What should you do?

Question16: You need to configure a static route to an on-premises resource behind a Cloud VPN gateway that is configured for policy-based routing using the gcloud command.
Which next hop should you choose?

Question17: You want to use Cloud Interconnect to connect your on-premises network to a GCP VPC. You cannot meet Google at one of its point-of-presence (POP) locations, and your on-premises router cannot run a Border Gateway Protocol (BGP) configuration.
Which connectivity model should you use?

Question18: You are creating a new application and require access to Cloud SQL from VPC instances without public IP addresses.
Which two actions should you take? (Choose two.)

Question19: One instance in your VPC is configured to run with a private IP address only. You want to ensure that even if this instance is deleted, its current private IP address will not be automatically assigned to a different instance.
In the GCP Console, what should you do?

Question20: You want to create a service in GCP using IPv6.
What should you do?

Question21: You are designing a Google Kubernetes Engine (GKE) cluster for your organization. The current cluster size is expected to host 10 nodes, with 20 Pods per node and 150 services. Because of the migration of new services over the next 2 years, there is a planned growth for 100 nodes, 200 Pods per node, and 1500 services. You want to use VPC-native clusters with alias IP ranges, while minimizing address consumption.
How should you design this topology?

Question22: Your company has recently expanded their EMEA-based operations into APAC. Globally distributed users report that their SMTP and IMAP services are slow. Your company requires end-to-end encryption, but you do not have access to the SSL certificates.
Which Google Cloud load balancer should you use?

Question23: You need to create a GKE cluster in an existing VPC that is accessible from on-premises. You must meet the following requirements:
* IP ranges for pods and services must be as small as possible.
* The nodes and the master must not be reachable from the internet.
* You must be able to use kubectl commands from on-premises subnets to manage the cluster.
How should you create the GKE cluster?

Question24: You are using a third-party next-generation firewall to inspect traffic. You created a custom route of 0.0.0.0/0 to route egress traffic to the firewall. You want to allow your VPC instances without public IP addresses to access the BigQuery and Cloud Pub/Sub APIs, without sending the traffic through the firewall.
Which two actions should you take? (Choose two.)

Question25: Your on-premises data center has 2 routers connected to your Google Cloud environment through a VPN on each router. All applications are working correctly; however, all of the traffic is passing across a single VPN instead of being load-balanced across the 2 connections as desired.
During troubleshooting you find:
* Each on-premises router is configured with a unique ASN.
* Each on-premises router is configured with the same routes and priorities.
* Both on-premises routers are configured with a VPN connected to a single Cloud Router.
* BGP sessions are established between both on-premises routers and the Cloud Router.
* Only 1 of the on-premises router's routes are being added to the routing table.
What is the most likely cause of this problem?

Question26: You need to ensure your personal SSH key works on every instance in your project. You want to accomplish this as efficiently as possible.
What should you do?

Question27: Your company is working with a partner to provide a solution for a customer. Both your company and the partner organization are using GCP. There are applications in the partner's network that need access to some resources in your company's VPC. There is no CIDR overlap between the VPCs.
Which two solutions can you implement to achieve the desired results without compromising the security? (Choose two.)

Question28: Your company's web server administrator is migrating on-premises backend servers for an application to GCP.
Libraries and configurations differ significantly across these backend servers. The migration to GCP will be lift- and-shift, and all requests to the servers will be served by a single network load balancer frontend. You want to use a GCP-native solution when possible.
How should you deploy this service in GCP?

Question29: You are using a 10-Gbps direct peering connection to Google together with the gsutil tool to upload files to Cloud Storage buckets from on-premises servers. The on-premises servers are 100 milliseconds away from the Google peering point. You notice that your uploads are not using the full 10-Gbps bandwidth available to you. You want to optimize the bandwidth utilization of the connection.
What should you do on your on-premises servers?

Question30: You want to create a service in GCP using IPv6.
What should you do?

Question31: You have a web application that is currently hosted in the us-central1 region. Users experience high latency when traveling in Asi a. You've configured a network load balancer, but users have not experienced a performance improvement. You want to decrease the latency.
What should you do?

Question32: You need to define an address plan for a future new GKE cluster in your VPC. This will be a VPC native cluster, and the default Pod IP range allocation will be used. You must pre-provision all the needed VPC subnets and their respective IP address ranges before cluster creation. The cluster will initially have a single node, but it will be scaled to a maximum of three nodes if necessary. You want to allocate the minimum number of Pod IP addresses.
Which subnet mask should you use for the Pod IP address range?

Question33: You are adding steps to a working automation that uses a service account to authenticate. You need to drive the automation the ability to retrieve files from a Cloud Storage bucket. Your organization requires using the least privilege possible.
What should you do?

Question34: You have created an HTTP(S) load balanced service. You need to verify that your backend instances are responding properly.
How should you configure the health check?

Question35: You are using the gcloud command line tool to create a new custom role in a project by coping a predefined role. You receive this error message:
INVALID_ARGUMENT: Permission resourcemanager.projects.list is not valid What should you do?

Question36: You are increasing your usage of Cloud VPN between on-premises and GCP, and you want to support more traffic than a single tunnel can handle. You want to increase the available bandwidth using Cloud VPN.
What should you do?

Question37: Your software team is developing an on-premises web application that requires direct connectivity to Compute Engine Instances in GCP using the RFC 1918 address space. You want to choose a connectivity solution from your on-premises environment to GCP, given these specifications:
* Your ISP is a Google Partner Interconnect provider.
* Your on-premises VPN device's internet uplink and downlink speeds are 10 Gbps.
* A test VPN connection between your on-premises gateway and GCP is performing at a maximum speed of 500 Mbps due to packet losses.
* Most of the data transfer will be from GCP to the on-premises environment.
* The application can burst up to 1.5 Gbps during peak transfers over the Interconnect.
* Cost and the complexity of the solution should be minimal.
How should you provision the connectivity solution?

Question38: You have enabled HTTP(S) load balancing for your application, and your application developers have reported that HTTP(S) requests are not being distributed correctly to your Compute Engine Virtual Machine instances. You want to find data about how the request are being distributed.
Which two methods can accomplish this? (Choose two.)

Question39: You want to configure a NAT to perform address translation between your on-premises network blocks and GCP.
Which NAT solution should you use?

Question40: You want to use Cloud Interconnect to connect your on-premises network to a GCP VPC. You cannot meet Google at one of its point-of-presence (POP) locations, and your on-premises router cannot run a Border Gateway Protocol (BGP) configuration.
Which connectivity model should you use?

Question41: You are disabling DNSSEC for one of your Cloud DNS-managed zones. You removed the DS records from your zone file, waited for them to expire from the cache, and disabled DNSSEC for the zone. You receive reports that DNSSEC validating resolves are unable to resolve names in your zone.
What should you do?

Question42: You created a new VPC for your development team. You want to allow access to the resources in this VPC via SSH only.
How should you configure your firewall rules?

Question43: You are designing a shared VPC architecture. Your network and security team has strict controls over which routes are exposed between departments. Your Production and Staging departments can communicate with each other, but only via specific networks. You want to follow Google-recommended practices.
How should you design this topology?

Question44: All the instances in your project are configured with the custom metadata enable-oslogin value set to FALSE and to block project-wide SSH keys. None of the instances are set with any SSH key, and no project-wide SSH keys have been configured. Firewall rules are set up to allow SSH sessions from any IP address range. You want to SSH into one instance.
What should you do?

Question45: You need to give each member of your network operations team least-privilege access to create, modify, and delete Cloud Interconnect VLAN attachments.
What should you do?

Question46: Your company is running out of network capacity to run a critical application in the on-premises data center. You want to migrate the application to GCP. You also want to ensure that the Security team does not lose their ability to monitor traffic to and from Compute Engine instances.
Which two products should you incorporate into the solution? (Choose two.)

Question47: You created a VPC network named Retail in auto mode. You want to create a VPC network named Distribution and peer it with the Retail VPC.
How should you configure the Distribution VPC?

Question48: You are increasing your usage of Cloud VPN between on-premises and GCP, and you want to support more traffic than a single tunnel can handle. You want to increase the available bandwidth using Cloud VPN.
What should you do?

Question49: You need to enable Cloud CDN for all the objects inside a storage bucket. You want to ensure that all the object in the storage bucket can be served by the CDN.
What should you do in the GCP Console?

Question50: You are using a 10-Gbps direct peering connection to Google together with the gsutil tool to upload files to Cloud Storage buckets from on-premises servers. The on-premises servers are 100 milliseconds away from the Google peering point. You notice that your uploads are not using the full 10-Gbps bandwidth available to you. You want to optimize the bandwidth utilization of the connection.
What should you do on your on-premises servers?

Question51: Your developer group works on a set of VM's frequently throughout the day. To save costs, you terminate the VM when it is not in use. However, you need to preserve the contents of the disk when the VM is terminated so users can resume where they left off when a new one is created.
What is the most cost-effective way to do? (Choose two)

Question52: You are trying to update firewall rules in a shared VPC for which you have been assigned only Network Admin permissions. You cannot modify the firewall rules. Your organization requires using the least privilege necessary.
Which level of permissions should you request?

Question53: Your company has just launched a new critical revenue-generating web application. You deployed the application for scalability using managed instance groups, autoscaling, and a network load balancer as frontend. One day, you notice severe bursty traffic that the caused autoscaling to reach the maximum number of instances, and users of your application cannot complete transactions. After an investigation, you think it as a DDOS attack. You want to quickly restore user access to your application and allow successful transactions while minimizing cost.
Which two steps should you take? (Choose two.)

Question54: You have a storage bucket that contains the following objects:
- folder-a/image-a-1.jpg
- folder-a/image-a-2.jpg
- folder-b/image-b-1.jpg
- folder-b/image-b-2.jpg
Cloud CDN is enabled on the storage bucket, and all four objects have been successfully cached. You want to remove the cached copies of all the objects with the prefix folder-a, using the minimum number of commands.
What should you do?

Question55: You have configured a Compute Engine virtual machine instance as a NAT gateway. You execute the following command:
gcloud compute routes create no-ip-internet-route \
--network custom-network1 \
--destination-range 0.0.0.0/0 \
--next-hop instance nat-gateway \
--next-hop instance-zone us-central1-a \
--tags no-ip --priority 800
You want existing instances to use the new NAT gateway. Which command should you execute?

Question56: You create a Google Kubernetes Engine private cluster and want to use kubectl to get the status of the pods. In one of your instances you notice the master is not responding, even though the cluster is up and running.
What should you do to solve the problem?

Question57: You work for a multinational enterprise that is moving to GCP.
These are the cloud requirements:
* An on-premises data center located in the United States in Oregon and New York with Dedicated Interconnects connected to Cloud regions us-west1 (primary HQ) and us-east4 (backup)
* Multiple regional offices in Europe and APAC
* Regional data processing is required in europe-west1 and australia-southeast1
* Centralized Network Administration Team
Your security and compliance team requires a virtual inline security appliance to perform L7 inspection for URL filtering. You want to deploy the appliance in us-west1.
What should you do?

Question58: You have deployed a proof-of-concept application by manually placing instances in a single Compute Engine zone. You are now moving the application to production, so you need to increase your application availability and ensure it can autoscale.
How should you provision your instances?

Question59: You want to implement an IPSec tunnel between your on-premises network and a VPC via Cloud VPN. You need to restrict reachability over the tunnel to specific local subnets, and you do not have a device capable of speaking Border Gateway Protocol (BGP).
Which routing option should you choose?

Question60: You want to set up two Cloud Routers so that one has an active Border Gateway Protocol (BGP) session, and the other one acts as a standby.
Which BGP attribute should you use on your on-premises router?

Question61: In your company, two departments with separate GCP projects (code-dev and data-dev) in the same organization need to allow full cross-communication between all of their virtual machines in GCP. Each department has one VPC in its project and wants full control over their network. Neither department intends to recreate its existing computing resources. You want to implement a solution that minimizes cost.
Which two steps should you take? (Choose two.)

Question62: You work for a university that is migrating to GCP.
These are the cloud requirements:
* On-premises connectivity with 10 Gbps
* Lowest latency access to the cloud
* Centralized Networking Administration Team
New departments are asking for on-premises connectivity to their projects. You want to deploy the most cost-efficient interconnect solution for connecting the campus to Google Cloud.
What should you do?

Question63: You have deployed a proof-of-concept application by manually placing instances in a single Compute Engine zone. You are now moving the application to production, so you need to increase your application availability and ensure it can autoscale.
How should you provision your instances?

Question64: Your company is running out of network capacity to run a critical application in the on-premises data center. You want to migrate the application to GCP. You also want to ensure that the Security team does not lose their ability to monitor traffic to and from Compute Engine instances.
Which two products should you incorporate into the solution? (Choose two.)

Question65: Your company offers a popular gaming service. Your instances are deployed with private IP addresses, and external access is granted through a global load balancer. You have recently engaged a traffic-scrubbing service and want to restrict your origin to allow connections only from the traffic-scrubbing service.
What should you do?

Question66: Your company is running out of network capacity to run a critical application in the on-premises data center.
You want to migrate the application to GCP. You also want to ensure that the Security team does not lose their ability to monitor traffic to and from Compute Engine instances.
Which two products should you incorporate into the solution? (Choose two.)

Question67: Your company has recently expanded their EMEA-based operations into APAC. Globally distributed users report that their SMTP and IMAP services are slow. Your company requires end-to-end encryption, but you do not have access to the SSL certificates.
Which Google Cloud load balancer should you use?

Question68: You are using a 10-Gbps direct peering connection to Google together with the gsutil tool to upload files to Cloud Storage buckets from on-premises servers. The on-premises servers are
100 milliseconds away from the Google peering point. You notice that your uploads are not using the full 10-Gbps bandwidth available to you. You want to optimize the bandwidth utilization of the connection.
What should you do on your on-premises servers?

Question69: You have recently been put in charge of managing identity and access management for your organization. You have several projects and want to use scripting and automation wherever possible. You want to grant the editor role to a project member.
Which two methods can you use to accomplish this? (Choose two.)

Question70: You want to set up two Cloud Routers so that one has an active Border Gateway Protocol (BGP) session, and the other one acts as a standby.
Which BGP attribute should you use on your on-premises router?

Question71: You are designing a Google Kubernetes Engine (GKE) cluster for your organization. The current cluster size is expected to host 10 nodes, with 20 Pods per node and 150 services. Because of the migration of new services over the next 2 years, there is a planned growth for 100 nodes, 200 Pods per node, and 1500 services. You want to use VPC-native clusters with alias IP ranges, while minimizing address consumption.
How should you design this topology?

Question72: Your organization is deploying a single project for 3 separate departments. Two of these departments require network connectivity between each other, but the third department should remain in isolation. Your design should create separate network administrative domains between these departments. You want to minimize operational overhead.
How should you design the topology?

Question73: Your company has a security team that manages firewalls and SSL certificates. It also has a networking team that manages the networking resources. The networking team needs to be able to read firewall rules, but should not be able to create, modify, or delete them.
How should you set up permissions for the networking team?

Question74: You need to give each member of your network operations team least-privilege access to create, modify, and delete Cloud Interconnect VLAN attachments.
What should you do?

Question75: You are trying to update firewall rules in a shared VPC for which you have been assigned only Network Admin permissions. You cannot modify the firewall rules. Your organization requires using the least privilege necessary.
Which level of permissions should you request?

Question76: You have an application that is running in a managed instance group. Your development team has released an updated instance template which contains a new feature which was not heavily tested. You want to minimize impact to users if there is a bug in the new template.
How should you update your instances?

Question77: You want to implement an IPSec tunnel between your on-premises network and a VPC via Cloud VPN. You need to restrict reachability over the tunnel to specific local subnets, and you do not have a device capable of speaking Border Gateway Protocol (BGP).
Which routing option should you choose?

Question78: You are migrating to Cloud DNS and want to import your BIND zone file.
Which command should you use?

Question79: You are migrating to Cloud DNS and want to import your BIND zone file.
Which command should you use?
gcloud dns record-sets import ZONE_FILE --zone MANAGED_ZONE

Question80: You want to deploy a VPN Gateway to connect your on-premises network to GCP. You are using a non BGP-capable on-premises VPN device. You want to minimize downtime and operational overhead when your network grows. The device supports only IKEv2, and you want to follow Google-recommended practices.
What should you do?

Question81: Your end users are located in close proximity to us-east1 and europe-west1. Their workloads need to communicate with each other. You want to minimize cost and increase network efficiency.
How should you design this topology?