EMT Practice Test

1. Question Content...

---

Question1: A customer needs a hosted physical desktop solution. Users will run typical office applications with limited use of some media-rich applications such as Adobe Photoshop. The customer needs the densest and most cost-effective solution that can support such users.
Which HPE Moonshot cartridge should the architect recommend?

Question2: An architect is positioning a scale-up solution to a customer. The solution will reduce the customer's server sprawl by reducing 100 legacy virtualization hosts while improving performance.
Which HPE platform provides an appropriate solution?

Question3: An architect proposes an HPE Apollo solution for a customer's environment. The customer needs the ability to have each of the network adapters in the HPE Apollo server connect to separate switches while also allowing them to be bonded for load-balancing.
Which networking feature on the switches will meet the customer's need?

Question4: An architect is designing a solution, a key element of which is the capability for fast VMware cluster growth with minimal administrative interaction.
Which HPE solution should the architect recommend?

Question5: A cost-conscious customer needs a server upgrade to host a Citrix application virtualization solution. The solution must meet the following requirements:
- Support 1,200 simultaneous users
- Scale out easily to accommodate 20 percent future growth
- Provide optimum performance for applications such as Microsoft Office Suite, Skype for Business, and Adobe Photoshop Which solution should the architect recommend?

Question6: A software development customer's data center has servers from three different vendors. The customer plans to purchase 15 HPE c7000 enclosures that are populated with BL460c Gen9 blades. Each enclosure will be deployed with HPE OneView advanced licensing. The customer uses third-party SNMP-based management tools as well as some custom dashboards that were written to monitor the status of the datacenter.
The infrastructure management team is concerned about how to integrate HPE OneView into its management strategy.
What should the architect demonstrate?

Question7: A customer plans to use Insight Control server provisioning and HPE OneView for vCenter Server. The vCenter Server manages one c7000 enclosure with 16 server blades running VMware ESXI.
Which licensing option should the architect include in the proposal?

Question8: During a data center transformation discussion, an architect obtains the following customer information:
core business depends heavily on advanced data modelling techniques that has been developed internally infrastructure in use takes anywhere from 10 hours to five days to complete complex data models for the various development teams that rely on them has a proud reputation as an "environmentally friendly" Fortune 500 company increasing productivity of its development team is the highest priority Which large scale HPC solution should the architect recommend to help the customer achieve its transformation goals?

Question9: An architect is discussing advantages of the Software Defined Datacenter concept used by HPE OneView with a customer. The customer is focused on improving the data center agility and manageability.
Which key benefit of the SDDC should the architect discuss with customer?

Question10: A customer has an HPE Integrity Superdome X solution. The customer requires flexible nPartitions that IT staff can quickly build at different times based on a pre-defined template.
Which approach should the architect recommend the customer take to meet this requirement?

Question11: An architect explains a software-defined data center (SDDC) concept and its benefits to a customer. The customer indicates an interest and so the architect needs to verify whether the customer is ready to move to the SDDC.
Which additional information should the architect obtain from the customer to verify this?

Question12: An architect is planning an HPE Apollo 4530 solution to support the Cloudera distribution of Spark and HDFS.
Each HPE ProLiant XL450 in the solution uses the following baseline recommendations:
- 15 8TB HDDs (120TB total)
- 2 10-core 2.3GHz processors
- 128GB memory (64GB on each processor)
- 2-port 10GbE FlexibleLOM
The architect has planned enough servers to meet the customer's requirements for total capacity.
Which two components in this plan are most likely to cause a bottleneck as an increasing number of Spark applications run?

Question13: An architect proposes an HPE Moonshot 1500 chassis with m710p cartridges, an HPE Moonshot 45XGc Switch, and an HPE 4-QSFP+ Uplink Module. The customer informs the architect that each cartridge requires a redundant 10GbE link.
How should the architect change the proposal?

Question14: A customer needs to streamline monitoring for its HPE Apollo 6000 solution.
Which benefit can HPE Advanced Power Management (APM) provide to this customer?

Question15: Which discussion point describes a Tier I approach to datacenter redundancy levels?

Question16: A customer is planning a multi-threaded HPC solution that would benefit from threads running in parallel.
The architect selects the HPE Apollo 6000 and needs to choose between the HPE XL230a and the XL250a compute tray.
What is one reason for choosing the XL250a tray?

Question17: A proposed solution includes the HPE Moonshot-4QSFP+ Uplink Modules. The customer informs the architect that the planned purchase of 40GbE switches has been postponed. The customer still intends to purchase
40GbE switches within a year, but in the meantime, existing 10GbE switches will be used. These switches are HPE network switches located 25 meters from the location of the racks that house the HPE Moonshot Solution. The customer needs 30Gb/s bandwidth.
Which action should the architect recommend to allow the customer to deploy the solution immediately and easily take advantage of 40GbE when deployed later?

Question18: A customer is using HPE OneView to monitor multiple HPE BladeSystems running ESXi and plans to use HPE OneView to manage the enclosure and blades.
Additionally, the customer plans to use HPE OneView for VMware Operations Manager to receive critical trend changes.
Which licenses should the architect include in the proposal?

Question19: An architect proposes an HPE Moonshot solution with three HPE Moonshot 1500 Chassis as follows:
- one chassis with 30 m710 cartridges
- two chassis with 30 m800 cartridges each
The customer wants to change the solution to use two HPE Moonshot 1500 chassis as follows:
- one chassis with 30 m710 cartridges and 15 m800 cartridges
- one chassis with 45 m800 cartridges
What should the architect explain to the customer?

Question20: A customer recently purchased an HPE Moonshot chassis to host its internal website. Subsequently, the customer reports difficulties deploying new cartridges in an efficient manner. The customer suggests exchanging the solution for a more traditional server platform.
What can the architect demonstrate to the customer to help solve the problem while preserving the validity of the original design solution?

Question21: A customer plans to purchase some c7000 blade enclosures equipped with Virtual Connect FlexFabric modules to support its development and test team. The customer is concerned about frequent changes to the server blade connectivity. In the initial proposal, an architect included HPE OneView, and now the customer wants to learn how HPE OneView will address their concern.
Which HPE OneView functionality should the architect explain to the customer?

Question22: An architect is designing a data center solution that contains an HPE BladeSystem for the virtual application, infrastructure, and VDI environment. It also contains an HPE Moonshot for the web servers.
In which parts of the HPE Transformation Area does this solution fit?

Question23: What defines lease rate factor (LRF)?

Question24: A customer has a mixed environment based on the G6, G7, Gen8, and Gen9 ProLiant server blades. The customer is interested in implementing HPE OneView but needs to understand security and monitoring mechanisms for different server generations.
Which statement most accurately describes different platform support in HPE OneView?

Question25: What is a basic assumption for an architect using the HPE Servers TCO calculator to justify a customer's migration away from a fully depreciated set of hardware?

Question26: A customer is planning to migrate from a Virtual Connect Enterprise Manager (VCEM) environment to HPE OneView.
Which topic should the architect discuss with the customer before the migration is implemented?

Question27: A customer plans to migrate from two fully depreciated high end Relational Database Management System (RDMS) servers, which are out of warranty and still under a support contract. An architect has recommended the customer migrate to four new HPE Superdome X BL920 (2P/18C) blades running Microsoft SQL server.
Which cost statement provides a rationale for the migration?

Question28: When designing a Superdome X configuration for a customer, which storage configuration should the architect choose?

Question29: A customer plans a partial migration from VMware to Red Hat Enterprise Virtualization (RHEV). The customer plans to purchase a new server platform for RHEV implementation with Gen9 server blades and Virtual Connect FlexFabric modules.
Which additional product should the architect include in the proposal?

Question30: A customer needs a live transcoding solution that meets the following requirements:
Supports thousands of HD streams
Provides GPU acceleration
Provides a high density of streams per Watt and rack unit
Which solution should the architect recommend?

Question31: An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image, and clone the image.
The customer is concerned about cost and is not interested in managing or monitoring performance of the solution.
Which solution meets these requirements?

Question32: A customer has 1,000 virtual machines that run on VMware ESXi servers. The customer is concerned that some of the virtual machines may be oversized, which could affect the other virtual machines.
Which HPE product should the architect recommend to help the customer with infrastructure sizing, to improve efficiency, and to reduce cost?

Question33: An architect needs to determine whether a customer is ready to move to a software-defined data center (SDDC).
Which additional information should the architect obtain from the customer to verify this?

Question34: A customer has a large Oracle-based ERP solution that runs on HPUX and multiple rx2800 i2 servers. The customer plans to move to an open source solution to reduce operating expenses. The customer needs the ability to deliver incremental capacity and needs to avoid incremental Oracle licensing costs.
Which HPE Server solution will help meet the customer's needs?