EMT Practice Test

1. Question Content...

---

Question1: In which category is the IEC 60309 an industry standard?

Question2: A customer is considering the DL380 Gen9 as the platform standard for its VLAN cluster. The configuration will use 24 drives. Each 8-drive cage will contain 1 SSD and 7 SATA drives.
Which array controller should the architect recommend for this configuration?

Question3: What is a common benefit of using a Converged Network Adapter?

Question4: Which modes of IT operations are bridged by HPE Composable infrastructure? (Select two.)

Question5: DRAG DROP
Click and drag the HPE configuration tool on the left to its matching description on the right.
Select and Place:

Question6: What are the benefits of implementing bladed architecture instead of traditional rack mount servers?
(Select two.)

Question7: DRAG DROP
Click and drag the memory type on the left to match it with its description on the right.
Select and Place:

Question8: A customer needs to verify the warranty status of a server blade running an important database.
Which HPE tool can the customer use to verify the warranty or service contract status for a specific server blade?

Question9: When configuring Secure Boot in Vmware ESXi, which option should the administrator enable?

Question10: What is an industry recommended best practice when placing and populating a rack of equipment?

Question11: Which tool used to configure HPE Secure Encryption?

Question12: Which HPE cloud-based portal provides the ability to easily track service events and support cases and view device configurations?

Question13: Which Intel Xeon processor supports up to 18 cores?

Question14: Which approach protects server data against natural disasters?

Question15: A customer need a server solution that supports E3-1200 v5 processors.
Which server model meets this requirement?

Question16: Which HPE option is required for using Location Discovery?

Question17: What is a benefit of PCIe version 3.0 over PCIe 2.0?

Question18: Which HPE technologies allow integration with HPE Intelligent Series Racks? (Select two.)

Question19: Where can a customer verify that a specific operating system is supported on a given HPE ProLiant server?

Question20: What do cluster environments use to identify node failures?

Question21: A customer needs to simplify server provisioning tasks with a tool that is capable of multi-server operating system and firmware provisioning for rack mount servers and Blade System servers.
Which tool should the architect recommend to the customer?

Question22: DRAG DROP
Select all that apply.
Click and drag each HPE Synergy component on the left to match its functionality description on the right.
Select and Place:

Question23: What is an advantage of RAID 6 over RAID 5?

Question24: What is a benefit of DDR4 memory?

Question25: Which design concept is based on the principle of fluid resource pools?

Question26: A customer's database is slow to respond, and the customer meets response times to be dramatically increased.
Which solution should the architect recommend to achieve this result?

Question27: A system administrator is concerned about a high number of visitors connecting to a company's network.
In addition to the production network traffic, the network infrastructure is used for the systems management traffic to the company's servers.
What should the administrator do to separate traffic?

Question28: Which server components are monitored for redundancy status by means of HPE Agentless Management? (Select two.)

Question29: Which statement describes out-of-band server management?

Question30: A customer needs a tower-based server that supports an E3-1200 v5 processor with 2 to 4 cores.
Which server model should the architect recommend?

Question31: What are competitive advantages of the HPE ProLiant Gen9 server? (Select two.)

Question32: What can an administrator use to install HPE Agentless Management Service? (Select two.)

Question33: Which options are offered in HPE Foundation Care services? (Select two.)

Question34: Which memory DIMM technology combines DRAM memory with flash memory to allow data to be retained in the event of power loss?

Question35: Which HPE tool can be used to connect directly to HPE to register a Gen8/Gen9 ProLiant server for HPE Insight Remote Support?

Question36: An architect designs a Synergy solution that will have five Compute Modules, each accessing a single, fully-populated D3940D Storage Module.
How many P542D controllers are needed to complete this solution?

Question37: What advantage does a blade system solution provide over a standard rack based server solution?

Question38: Which component requires HPE Insight Management Agents to be installed to verify pre-failure warranty status?

Question39: DRAG DROP
Select all that apply.
Click and drug the business challenge on the left to match it with the competitive advantage provided by implementing a hybrid infrastructure on the right.
Select and Place:

Question40: Which solution provides the lowest latency and highest bandwidth for network connectivity for HPC clusters?

Question41: What can be used to facilitate the configuration of OS installations on HPE ProLiant Servers?

Question42: A customer needs to specify a firmware baseline for an HPE c7000 enclosure in HPE OneView.
Under which condition is this option available?

Question43: Which tool should an architect use to estimate data center cooling requirements for server configurations?

Question44: A customer needs to increase security within a management network and add the ability to log in to an iLO by using domain credentials.
Which component is required to enable this functionality?

Question45: An architect is using Sales Builder for Windows to create a configuration. The architect needs to generate a graphical view that can be used to modify the configuration.
Which functionality should the architect use?

Question46: Which primary area should an administrator consider to ensure adequate airflow and to provide space for servicing of servers in a data center?

Question47: What is a feature of HPE Synergy Composer?

Question48: An administrator installs the Windows 2012 R2 operating system on a server with multiple network interface cards. The solution needs to have network adapter redundancy at the operating system level.
What should the administrator do to meet this requirement?

Question49: A customer selects the HPE c7000 with redundant FlexFabric-20/40 F8 Virtual Connect modules for a private cloud project. For the server platform, the customer plans to use the ProLiant BL460 Gen9 with the FlexFabric adapters installed.
How many FlexNICs will be available per 20Gb port for the customer's cloud services?

Question50: Which tool monitors the usage of Solid State Drives (SSD) to determine the estimated life of the drive?

Question51: Which protocol is primarily used in servers to connect high performance disk drives to internal disk controllers?

Question52: A customer needs to eliminate thermal imbalance in its new data center.
Which solution should the architect recommend to the customer?

Question53: What is a feature of HPE Onboard Administrator?

Question54: A customer is deploying a new solution that requires a third-party VoIP card.
Which HPE BladeSystem component is needed to be able to attach the customer's existing BL460c Gen9 server blades to the VoIP card?

Question55: Which HPE software product provides a single infrastructure and single management platform?

Question56: HOTSPOT
A server administrator needs to find more information about a hardware issue on a server blade. The administrator is not sure which server blade is involved.
Click the menu option that will help the administrator find additional details in the shortest amount of time.
Hot Area:

Question57: What is a characteristic of HPE Agentless Management on ProLiant Gen8 and Gen9 servers?