EMT Practice Test

1. Question Content...

---

Question1: A customer is facing high and unpredictable latency on an HPE ProLiant DL380 Gen10 server equipped with P408i-a controller Which tool can display an Array Diagnostic Report?

Question2: A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right.
(Choose two.)

Question3: A customer has the following requirements:
* two or more 10Gb SFP+ uplinks
* downlink ports capable of 1Gb or 10Gb operation over CAT6a or CAT7 cables.
* 24 downlink ports
Which HPE tool would you use to help choose an HPE network solution that meets the customer requirements?

Question4: Indicate whether each management feature manages or monitors a single system or multiple systems.

Question5: Match each adapter to its characteristic.

Question6: A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.

Question7: A client complains about systems reliability issues caused by their staff's inability to identify the root cause of failures. The client's lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.
What should you configure in HPE OneView to enable the external monitoring of the managed devices?

Question8: A customer plans to back up a file server that holds 2 TB of data. The customer wants to upgrade their network infrastructure to support backup and to implement a datacenter network solution.
Which solutions would HPE recommend to meet the customer needs? (Choose two.)

Question9: You are creating a logical array on an HPE ProLiant server. The customer asks you to use drives with different capacities in a single array.
What should you explain to this customer?

Question10: When is it appropriate for a customer to implement HPE OneView Standard?

Question11: You are configuring an MSA 2052 for one of your customers in OCA.
Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.

Question12: You need to install 10 HPE ProLiant servers in an environment without DHCP.
Which tool can you use to set up remote management?

Question13: A customer needs to update firmware and perform diagnostic tests on various components of a HPE ProLiant server.
Which utility should they use?

Question14: You are onsite at a customer location to install a new network switch. The customer wants users to be able to manage the switch through the IP network.
How should you connect the switch to the network?

Question15: A customer with limited IT administration resources needs a complete HPE server, storage, and networking solution. The solution must be able to be deployed in an hour or less through a simple, wizard-based setup.
They want to manage the HPE solution through a simple, integrated plug-in to vCenter, since their IT staff members are already familiar with vCenter.
Which HPE solution best meets the customer requirements?

Question16: Which security feature is unique to HPE ProLiant Gen10 servers?

Question17: A fast-growing customer with a NAS-based storage solution is evaluating Fibre Channel storage for their VMware environment.
How would this customer benefit from adding 16 Gb Fibre Channel storage to their environment? (Choose two.)

Question18: A customer needs to increase the availability and bandwidth of network connectivity to their servers.
Which switch feature meets the customer's needs?

Question19: You are installing an HPE ProLiant server that has a shared network port for iLO and NIC teaming. You need to ensure that you can still access iLO after configuring the NIC team.
Which teaming technology should you configure?

Question20: What is the process or writing data to two locations within a single array in real time?

Question21: You are troubleshooting an HPE ProLiant rack-mount server. You need to collect event data from the server, even when it is not operational.
Which tool should you use?

Question22: A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?

Question23: You are installing an HPE ProLiant server in a rack at a customer site. The customer's facility is in a high-voltage utility service area, and they want to be certain that the power supply is supported.
Which ProLiant feature addresses the customer's concern?

Question24: You are troubleshooting a HPE ProLiant Gen 9 server and need to find a consolidated view of all the system health and configuration information in a single web interface.
Which HPE tool should you use?

Question25: Refer to the exhibits.


A customer is growing rapidly, and they need to add as many drives as possible to their MSA 2052 array. You created the original configuration. How many drives can be added to the customer array? (Select two)

Question26: You are designing a solution to run a Citrix XenDesktop workload.
Which HPE planning and designing resource contains a detailed example of this type of solution, including a list of all the hardware and software components?

Question27: You are troubleshooting server issues and need to troubleshoot when online and offline.
Which HPE tool should you use?

Question28: Match each HPE solution to its optimal use case.

Question29: A customer needs to provide inventory management, health monitoring, status alerting, and reporting for their ProLiant servers.
Which HPE management offering meets the customer's needs?

Question30: A server administrator needs to see the 24-hour history of the power consumed by an installed HPE ProLiant server.
Which HPE tool can the admin use to gather this information?

Question31: You are installing new drives into the internal cage of a HPE ProLiant DL380 server.
How is the drive device number set?

Question32: A customer has an application that consumes 500 GB storage and requires an RTO and PRO of 15 minutes.
Which backup and recovery technology enables the customer to meet their requirements in the most cost-effective manner?

Question33: You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.
How should you install the PDUs to maximize power distribution and space efficiency?

Question34: A customer needs to virtualize their storage across physical servers and storage environments.
Which HPE solution meets the customer's needs?

Question35: Which tool provides a report on the current usage levels and life span of some installed read-intensive flash drives?

Question36: A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.
Which management solution provides this functionality?

Question37: Match the feature to the lowest iLO5 license in which it is available

Question38: An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.
Which HPE software tool should the customer use to minimize the time required to perform this activity.

Question39: Which HPE feature enables the customer to achieve this A customer has a new virtual environment. They selected HPE servers for the environment in order to achieve better performance for their applications.
server performance improvement?

Question40: You are installing new drives into the internal cage of a HPE ProLiant DL380 server.
How is the drive device number set?

Question41: You are installing a data center switch.
Which methods are recommended to configure the switch? (Choose two.)

Question42: You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl port link-type trunk port trunk permit vlan 50 port trunk permit vlan 2 port trunk pvid vlan 50 Given the configuration above, what should happen to any untagged traffic coming from the VMware ESXI host?

Question43: A customer has implemented an HPE ProLiant server with internal storage and needs to monitor the array health status.
Which management application can the customer use to discover errors quickly and minimize the possible downtime?

Question44: A customer requires a software-defined storage solution.
Which storage solution meets the customer's needs?

Question45: Which two HPE applications are installed on Windows operating systems with intelligent Provisioning?
(Choose two.)

Question46: A customer needs to centralize their backup environment for their branch office They plan to use HPE StoreOnce with catalyst What should they implement within their backups software to minimize the network load on the remote site?

Question47: A customer needs to share files among their Linux-based servers in a cost effective manner. The customer is concerned about compatibility with the servers in their environment that run Windows.
Which HPE StoreEasy feature addresses the customer's concerns?

Question48: For which virtualization management products does HPE OneView offer integration plug-ins1? (Select two.)

Question49: You need to update the firmware on an MSL2024 to version 26.43.51. Which HPE utility do you need to use?

Question50: In which layer of the OSI model would you find an IP address?

Question51: When should you use the HPE Switch Selector?

Question52: You are installing additional components to a server.
Which HPE resource provides Quickspecs that verify the compatibility of the server hardware with the server?

Question53: A customer purchased a Nimble HF20 a year ago They are experiencing an issue with a few of their VMware servers in the RTP Nimble date center and asked that you make a recommendation based on the data in infoSight.

What should you recommend'?

Question54: Which backup targets are available from an HPE StoreOnce backup system? (Choose two.)

Question55: You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You did not wait for the upgrade to be activated on the first switch before beginning to install the firmware on the second switch.
What must you do to install the firmware on the second switch?

Question56: Which HPE tool can you use to ensure a consistent level of firmware exists across all BladeSystem interconnects and servers in an environment?

Question57: A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:
* 3 servers with dual AMD processors, 256GB RAM, and 10Gb network connectivity
* 10TB of high performance shared storage
* Cloud-based performance monitoring and analytics
The customer prefers rack mounted equipment.
Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.

Question58: What can you do when installing an HPE switch to provide protection from electrostatic discharge?

Question59: You are troubleshooting a HPE ProLiant rack-mount server. You notice that all front-panel status LEDs flash simultaneously.
What does this indicate has occurred on the server?

Question60: You are troubleshooting a POST error on a HPE ProLiant rack-mount server. HPE support has directed you to test a minimum hardware configuration.
Which components should you remove? (Choose two.)

Question61: When should you choose to populate a server with LRDlMMs?

Question62: A customer needs a shared storage solution for a virtualization platform that will host a database application.
The customer is considering an HPE Nimble array.
Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?

Question63: Match each customer data center architecture to its network topology.

Question64: Which hardware and software components make up a Nimble dHCI infrastructure?

Question65: A customer needs to update firmware and perform diagnostic tests on various components of a HPE ProLiant server.
Which utility should they use?

Question66: A customer requires 12 Gb local storage for their VMware boot volumes, which require high-performance read cycles to enable the operating system to boot quickly.
Which drive type provides the most appropriate size and most cost-effective way to meet this requirement?

Question67: Place the components on the left in the correct order on the right for the recommended power-up sequence.

Question68: A customer is configuring their SAN.
Which types of data typically require block storage? (Choose two.)

Question69: You are creating an internal array on an HPE ProLiant server.
What can you do to maximize the storage space efficiency?

Question70: A customer is building out their rack of servers and storage systems. They need a high-performance network with a simple centralized management capability and deep buffer support for iSCSI. They expect high growth in their virtualization environment.
Which solution will best meet the customer's needs?

Question71: Which HPE service level offers customers special parts handling and access to onsite service 24x7, including HPE holidays?

Question72: Refer to the exhibit.

A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.
The customer is now experiencing performance issues.
Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)

Question73: Which HPE MSA storage feature enables tuning the tier-migration algorithm for a virtual volume when creating or modifying the volume?

Question74: You are installing a combined server and storage solution at a customer location. What must you keep in mind regarding the typical requirements for the location? (Choose two.)

Question75: You have completed a non-disruptive activation of firmware on an SN6000 switch.
Which session must be restarted manually?

Question76: You are installing an HPE Nimble HF20 into a customer's existing rack.
Prior to installation, what should you consider?

Question77: A system administrator is performing the BIOS/Platform configuration of a DL380 Gen10 servers You notice the amber health LED.
The health status of which solution components can be verified with embedded UEFI Diagnostics? {Select two.)

Question78: Where would a customer go to run the SSD wear Gauge report on an HPE ProLiant server?

Question79: A customer reports that their new iSCSI MSA 2052 has failed. You find that the MSA is up and running, but the servers cannot mount their LUNs.
Which troubleshooting steps should you prioritize? (Choose two.)

Question80: What is a feature of the MSA 1050 that will help your Storage Customer better utilize storage resources?

Question81: You are designing a system for a customer that has a contract with a government agency. The contract requires the highest level of security algorithms possible.
Which HPE ProLiant Gen10 feature set will address this customer's needs?

Question82: A customer plans to use HPE ProLiant servers for an application that requires low latency for all components.
Which workload profile should the customer use?

Question83: A customer has a HPE OneView environment and has added all their HPE ProLiant servers and enclosures.
Which benefits does a customer gain by configuring Remote Support on their environment? (Choose two.)

Question84: You are configuring a FlexFabric switch for a customer environment. The customer has requested specific SFP+ transceivers, power options, and cables.
Which HPE tool enables you to select and configure a switch according to precise specifications?

Question85: A company plans to purchase new HPE servers. The company needs to maximize local storage capacity within the servers.
Which HPE servers should the company install?