MoreExam
1. Question Content...
EXPLANATION
Answer: X - EXPLANATION Content.
Question1: Click the Exhibit button.You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
Question2: You want to verify that connections are cables correctly and that shelf IDs are unique within an HA pair.Which tool would be used to accomplish these tasks?
Question3: After a system panic, the NetApp Support team advises you to run the sldiag command.Which two actions must be performed before you use this command? (Choose two.)
Question4: You have a 6-node ONTAP 9.1 cluster with two FAS6290 nodes and four FAS8080 EX nodes using a SAN protocol.In this scenario, how many FAS9000 HA pairs would be joined to this cluster?
Question5: Click the Exhibit button.You are receiving AutoSupport e-mail from both controllers, but Active IQ is showing updates from only node cl-01-02.Referring to the exhibit, what is a reason why Active IQ is receiving AutoSupport updates from only node cl-01-02?
Question6: A 4-node cluster has connectivity for both block and file access. Nodes 1 and 3 are used for file access, and nodes 2 and 4 are used for block access. During routine maintenance, node 4 is switched off and the LIFs are migrated to other nodes. Upon investigation, you see that the LIFs that serve file traffic have moved to alternative ports.However, LIFs that serve the block have not migrated. In this scenario, what is happening?
Question7: What is the maximum number of data disks that a RAID-TEC RAID group has?
Question8: A customer wants you to add a new AFF A700 HA pair to an existing 4-node AFF8080 EX cluster. The existing cluster uses NetApp CN1610 switches for the cluster connection and is using the recommended port count.Which statement is true in this scenario?
Question9: You are installing a 4-node AFF A400 cluster and are asked to create a custom security message before and after user login.Which two security features are used to perform this task? (Choose two.)
Question10: You are asked to add a new HA pair to an existing 2-node switchless AFF A220 cluster. You must first convert to a 2-node switched cluster using Broadcom BES-53248 cluster switches.Which two conditions must be fulfilled before you start the migration? (Choose two.)
Question11: You create a new CIFS data LIF with the default failover group.In this scenario, where will the new LIF failover if the node that owns the new LIF panics?
Question12: You completed an ONTAP cluster deployment as a reseller engineer. During the knowledge transfer process to the customer, they ask for proof that the array has correct multi-path HA cabling deployed and that the array is error free.Which documentation output would you present to the customer to satisfy this requirement?
Question13: After you deploy a 4-node AFF A220, you want to upgrade the ONTAP version of the cluster.In this scenario, before the upgrade, which advanced CLI command is used to locate epsilon?
Question14: During handover, a customer asks you how to obtain support from NetApp after installation.What are two responses in this scenario? (Choose two.)
Question15: Click the Exhibit button.You are installing a new FAS cluster. The management network must be on tagged VLAN 11 for remote administration by a service provider.Referring to the exhibit, which two ports will allow service provider access to both cluster and node management LIFs? (Choose two.)
Question16: An iSCSI LIF fails to migrate during a storage failover test.In this scenario, why did the LIF not migrate?
Question17: While installing a new AFF A400 HA pair, you are unable to add an NTP server from another subnet. You are able to ping the NTP server from the new cluster.In this scenario, what are two causes of this problem? (Choose two.)
Question18: According to NetApp best practices, how many NTP servers should you associate with an ONTAP cluster?
Question19: You are adding new controllers to an existing cluster. As part of the upgrade process, you have updated the BES-53248 cluster switches.In this scenario. Which two commands would you use to verify a healthy cluster after the upgrade? (Choose two.)
Question20: While troubleshooting an issue with a newly installed system, you used the system controller environment show command.In this scenario, which issue would be diagnosed with this command?
Question21: A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.In this scenario, which step would be required to accomplish this task?
Question22: Which statement regarding Epsilon is true?
Question23: You installed a new AFF A800 2-node ONTAP 9.5 cluster and are asked to run diagnostics to validate the hardware.Which command is used from the loader prompt to enter diagnostics?
Question24: You are completing an ONTAP base installation, and your customer is asking you to create two SVMs, one for NFS and one for SMB.Which type of SVM needs to be created to complete the installation?
Question25: You have set up a new 2-node switchless cluster and want to verify that the failover is configured correctly.In this scenario, which two commands accomplish this task? (Choose two.)
Question26: What are two types of load balancing methods available in multimode interface groups? (Choose two.)
Question27: An administrator is installing a new AFF A220 HA pair and needs to convert two unified target adapter (UTA) ports from converged network adapter (CNA) to FC.In this scenario, which action sequence will accomplish this task?
Question28: You want to create a new intercluster LIF for cross-cluster replication and use the CLI. After you create the nac101_intercluster_lif_icl LIF, you are not able to see the LIF in the list of local intercluster LIFs.Referring to the exhibit, what is the problem?
Question29: What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)
Question30: Click the Exhibit button.You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.For a high availability, which ports should swap Ethernet cables?
Question31: A customer wants to expand a 10-node AFF A700s NAS cluster running with Cisco Nexus 3132Q-V cluster interconnect switches using new nodes.In this scenario, what is the maximum number of nodes to be added into this cluster?
Question32: After performing a controller upgrade on an HA pair in an ONTAP 9.5 cluster, you want to decommission the old systems.Which statement is correct in this scenario?
Question33: Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.In this scenario, which two commands would you use to perform this test? (Choose two.)
Question34: Your customer wants to buy four new DS212C shelves with an 8 TB SATA drive. The customer also wants to know the usable aggregate size of this configuration.In this scenario, which resource would you use to accomplish this task?
Question35: You were asked to install a FAS9000 with two quad-port SAS PCI cards. The SAS PCI cards are installed in slot 9 and slot 1. In preparation for the installation, you are filling out the SAS cabling worksheet. In this scenario, which ports are used for the second stack?
Question36: You are creating an aggregate on a new FAS8200 with two DS224C shelves. Your customer wants to be able to use the Disk Maintenance Center.In this scenario, what is the minimum number of spare disks required per node and disk type?
Question37: Click the Exhibit button.You plan to install a new ONTAP cluster at a customer site by using the new ONTAP System Manager 9.7 GUI.Referring to the exhibit, what must you do before you provision initial storage?
Question38: When planning the installation of a new ONTAP 9.5 cluster for a customer, which three steps should you perform? (Choose three.)
Question39: You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
Question40: You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.Which tool would you use to accomplish this task?
Question41: Which statement about LIFs is true?
Question42: Click the Exhibit button.You have an 8-node cluster, and sometimes the data LIFs fail over to a non-working port.Referring to the exhibit, what must you do to solve this problem?
Question43: A customer has an AFF A800 with 24 internal drives and is running out of storage capacity.In this scenario, which action will solve this issue?
Question44: In an ONTAP switched cluster, which three types of traffic travels over the cluster network? (Choose three.)
Question45: When you install a new ONTAP 9.7 4-node cluster, which network type is required?
Question46: You are preparing for a new installation. While determining the most suitable version of ONTAP software to deploy, you want to verify the ONTAP 9 release cadence to ensure that you are deploying a Long Term Service (LTS) release.In this scenario, where would you find this information?
Question47: Which keyboard combination enables you to access the Service Processor (SP) or the Board Management Control (BMC) from the system console CLI?
Question48: You create a LIF called svm_cifs_lif01 on a port that is already in an up state. After you test the storage failover, the LIF does not automatically revert to its home port.In this scenario, what should you do to solve the problem?
Question49: After setting up a new cluster, you run an AutoSupport message for a test.Which two commands would you use to proof the functionality and settings of AutoSupport? (Choose two.)
Question50: When you set up a new 2-node switchless cluster running ONTAP 9.5, which IP subnet is used for the automatic IP assignment on cluster ports?
