MoreExam
1. Question Content...
EXPLANATION
Answer: X - EXPLANATION Content.
Question1: You are installing a new AFF A400 cluster that is running ONTAP 9.7 software. You are asked to attach an Amazon S3 cloud tier for FabricPool technology.In this scenario, which two NetApp License File (NLF) types are supported for cloud tiering? (Choose two.)
Question2: What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)
Question3: You are adding new controllers to an existing cluster. As part of the upgrade process, you have updated the BES-53248 cluster switches.In this scenario.Which two commands would you use to verify a healthy cluster after the upgrade? (Choose two.)
Question4: You are preparing to physically install a new AFF A400 cluster into a customer's racks. All equipment has been delivered to the customer's site.Which three tools do you need to complete this installation? (Choose three.)
Question5: After the successful installation of a NetApp ONTAP cluster, the customer wants to know how to view telemetry data. The customer also wants to receive online information about any risks with the cluster and potential best-practice gaps.Which tool satisfies the customer's requirements?
Question6: You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You are adding a new AFF A250 HA pair to the cluster with new iSCSI SAN LIFs. You need to allow non-optimized data paths from the AFF A250 nodes to the existing LUNs on the FAS8700 nodes.In this scenario, which two ONTAP configuration settings must you verify? (Choose two.)
Question7: Click the Exhibit button.You are preparing to replace a Cisco Nexus 92300YC switch. You have executed the cluster ping-cluster node1 command and received the output as shown in the exhibit.Which two checks indicate that the cluster is ready for the replacement to be performed? (Choose two.)
Question8: You installed a new 4-node AFF A400 ONTAP 9.8 cluster. The AFF400 controller data ports were automatically discovered by "automatic port placement".In this scenario, which two ONTAP network settings were automatically configured? (Choose two.)
Question9: You have a 2-node FAS8300 switchless ONTAP 9.8 cluster that serves NAS volumes. You have a data SVM that connects to the network using multimode LACP with VLAN tags.In this scenario, which front-end FAS8300 network port would you create the data LIFs?
Question10: You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.In this scenario, what are two methods to update ONTAP? (Choose two.)
Question11: After completing the installation of an AFF A800 ONTAP AI cluster, you are asked which contacts are available for additional help in obtaining immediate assistance in solving P1 issues.In this scenario, what do you tell the customer?
Question12: You have added two new AFF A250 nodes to an existing 4-node cluster with NetApp CN1610 cluster network switches. Although the nodes can join the cluster, the storage failover show command output shows that the NVRAM log is not synchronized, and it cannot reach the partner over an HA interconnect.In this scenario, which two statements are true? (Choose two.)
Question13: You have installed a new 2-node FAS9000 cluster with two external shelves. You want to make sure that each node has two paths to each disk in the shelves.How do you verify your configuration?
Question14: When creating a new 3.8 TB SSD-based aggregate, what is the default RAID type used with ONTAP 9.8?
Question15: You installed two separate clusters in an isolated data center without outbound network access. The customer wants to troubleshoot issues locally and also create custom Excel reports for capacity utilization from a local server.In this scenario, which NetApp tool would satisfy this requirement?
Question16: After completing a technology refresh, you need to schedule a knowledge transfer with a customer. The customer asks you to address a number of topics during the meeting.In this scenario, which two topics would be appropriate to address? (Choose two.)
Question17: You have just finished installing and configuring an ONTAP cluster for a customer.In this scenario, which product collects information and produces site documentation?
Question18: You want to use the NetAppDocs tool to collect information on a newly configured ONTAP 9.8 cluster and to generate a Word document with the details of the cluster configuration.Which two data sources would you use to collect the necessary data? (Choose two.)
Question19: After the installation of a new ONTAP 9.8 cluster, you have to verify if AutoSupport works.In this scenario, which two commands would you use to accomplish this task? (Choose two.)
Question20: You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.Which action must be performed to ensure that the customer's requests are satisfied?
Question21: Click the Exhibit button.As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
Question22: You are preparing for the installation of a new 2-node switchless AFF A250 ONTAP 9.8 cluster and need to obtain the preinstallation information from the customer.In this scenario, what are three examples of data required from the customer? (Choose three.)
Question23: You install a 4-node cluster with an AFF A400 HA pair and a FAS8300 HA pair. After setup, you are asked to review the audit logs on each controller from a Web browser.In this scenario, which method provides access to the logs from a Web browser?
Question24: After the Installation of a new NetApp FAS system, you use theNetAppDocs tool for site design documentation.In this scenario, in which three document formats would you create an inventory report? (Choose three.)
Question25: A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.In this scenario, which step would be required to accomplish this task?
Question26: While testing a recently installed FAS8700 cluster, a node fails. You now need to replace the impaired node.In this scenario, which two statements are true? (Choose two.)
Question27: You are expanding an existing cluster that uses BES-53248 cluster interconnect switches. You connected the new controllers to ports 0/17 through 0/20. However, you are unable to join the new nodes to the cluster.Which action must be taken to solve the problem?
Question28: In ONTAP 9.7 software, how many different replicated databases (RDBs) exist per node?
Question29: You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.Which tool would you use to accomplish this task?
Question30: Click the Exhibit button.You are installing a 2-node AFF A400 switchless cluster. You have cabled the management network to the e0M port. NetApp also recommends cabling to a redundant management network switch.Referring to the exhibit, to which port should the redundant management network be cabled?
Question31: An administrator issued the cluster setup command and configured a 2-node ONTAP 9.8 cluster.In this scenario, which tool would the administrator use to validate the configuration?
Question32: You are installing a new AFF A400 cluster and need to access the cluster management LIF from a remote subnet with the fully qualified domain name (FQDN) a400.lab.netapp.com.In this scenario, which two network components must be configured to log in to ONTAP System Manager from the remote subnet? (Choose two.)
Question33: You have an AFF All SAN Array (ASA) cluster that is running ONTAP 9.7. The cluster is configured for Active Directory domain controller access using a domain tunnel.In this scenario, which two licenses are enabled on the cluster? (Choose two.)
Question34: Click the Exhibit button.A customer wants to replace their ONTAP cluster CN1610 switches with Cisco Nexus 3132Q-V switches. They want to perform a non-disruptive upgrade.Referring to the exhibit, which cable will be required to non-disruptively migrate to the new switches?
Question35: Click the Exhibit button.During an ONTAP cluster handover procedure, your customer asks how to identify and solve issues that might occur on the newly deployed array.Referring to the exhibit, which two widgets would the customer use to help with these issues? (Choose two.)
Question36: An ONTAP cluster is installed at a secure site. The array has no access to the Internet but is managed 24/7 by onsite engineers. The customer requires that when hardware failures occur, the failures are reported to the NetApp Support team as quickly as possible.In this scenario, which two tasks should be performed during the project hand-off procedure to satisfy the customer's requirement? (Choose two.)
Question37: You are expanding an existing 4-node ONTAP 9.8 cluster with a FAS8300 HA pair by adding a new FAS500f HA pair. Before the expansion, you are asked to save the configuration of the cluster to a backup file.In this scenario, which two ONTAP configuration backup methods are available? (Choose two.)
Question38: After adding two nodes to an FC-enabled cluster, the storage administrator wants to ensure that existing LUNs can use paths on the new nodes.What is required to complete this task?
Question39: Click the Exhibit button.You are installing a new AFF All SAN Array A700 HA pair.Referring to the exhibit, which IP address would have been used to join node 02 to the cluster during setup?
Question40: You have a 2-node FAS8300 ONTAP 9.8 cluster that serves SMB shares. You are configuring interface groups for higher performance and resiliency.Which two NetApp best practices should you follow to satisfy these performance and resiliency requirements? (Choose two.)
Question41: Before starting a base installation on an AFF A400, you need to find out the default cluster interconnect ports for the AFF A400 controllers.In this scenario, which three resources would you use to find this information? (Choose three.)
Question42: A customer is asked to install a new AFF ASA A700 system. During the installation, the customer asks if ONTAP 9.8 is supported with their host's OS version running Windows 2016.In this scenario, which NetApp tool would verify supportability?
Question43: You are deploying a new AFF All SAN Array A250 into a customer's existing data fabric.In this scenario, which two tools would give insight into their existing Cisco MDS fabric configuration? (Choose two.)
