MoreExam
1. Question Content...
EXPLANATION
Answer: X - EXPLANATION Content.
Question1: A customer wants to enable SnapMirror Synchronous across their environment. The customer must ensure that SnapMirror Synchronous will work across the environment.In this scenario, which two statements are true? (Choose two.)
Question2: After a system panic, the NetApp Support team advises you to run the sldiag command.Which two actions must be performed before you use this command? (Choose two.)
Question3: Click the Exhibit button.During an ONTAP cluster handover procedure, your customer asks how to identify and solve issues that might occur on the newly deployed array.Referring to the exhibit, which two widgets would the customer use to help with these issues? (Choose two.)
Question4: You are deploying an 8-node AFF A700 by using BES-53248 cluster switches. During the installation, you notice that ports higher than 16 are not coming online. You verify that the additional licenses are installed.Which two additional steps must be taken to bring the additional ports online? (Choose two.)
Question5: Your customer wants to know more about the network configuration within the cluster.In this scenario, which statement is correct about a LIF?
Question6: A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.In this scenario, which step would be required to accomplish this task?
Question7: Which three components are required when setting up a new ONTAP cluster? (Choose three.)
Question8: You want to add an AFF A400 HA pair to an existing cluster.In this scenario, which LIF type is required?
Question9: You have just finished installing and configuring an ONTAP cluster for a customer.In this scenario, which product collects information and produces site documentation?
Question10: A customer is creating a new SVM to host iSCSI LUNs for a Hyper-V cluster. You need to successfully map the new LUNs and make them visible to the Hyper-V cluster.In this scenario, which host information is required to accomplish this task?
Question11: Your customer plans to expand a 2-node FAS2750 switched cluster with two new controllers.In this scenario, which two prerequisites should you examine in advance? (Choose two.)
Question12: You are deploying a new AFF All SAN Array A250 into a customer's existing data fabric.In this scenario, which two tools would give insight into their existing Cisco MDS fabric configuration? (Choose two.)
Question13: Click the Exhibit button.You are installing a 2-node AFF A400 switchless cluster. You have cabled the management network to the e0M port. NetApp also recommends cabling to a redundant management network switch.Referring to the exhibit, to which port should the redundant management network be cabled?
Question14: You are asked to add a new HA pair to an existing 2-node switchless AFF A220 cluster. You must first convert to a 2-node switched cluster using Broadcom BES-53248 cluster switches.Which two conditions must be fulfilled before you start the migration? (Choose two.)
Question15: You installed a new pair of Cisco 92300YC cluster switches at a customer's site. Before you install any files on the switch, you want to view the current configuration.In this scenario, which command would you use to accomplish this task?
Question16: You installed a new 2-node FAS500f ONTAP 9.8 switchless cluster that serves NAS volumes to both NFSv4.1 and SMB clients. The host operating systems have full flow control enabled on their data ports.In this scenario, which two flow control settings would you verify? (Choose two.)
Question17: You need to install a cluster with a FAS2720 HA pair and a FAS8300 HA pair.Which NetApp tool will verify which cluster interconnect switches support this configuration?
Question18: Click the Exhibit button.After installation of a new ONTAP cluster, you experience a problem. You successfully create a support case on the NetApp Support site. The customer asks you how to view the status of the case.Referring to the exhibit, which two steps would allow the customer to accomplish this task? (Choose two.)
Question19: You are installing a new six-node ONTAP 9.8 cluster. You have completed the initial configuration of the cluster interconnect switches and the ONTAP cluster.In this scenario, which feature should you enable?
Question20: You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.In this scenario, which two health outputs would this command show you? (Choose two.)
Question21: You are preparing to physically install a new AFF A400 cluster into a customer's racks. All equipment has been delivered to the customer's site.Which three tools do you need to complete this installation? (Choose three.)
Question22: After adding two nodes to an FC-enabled cluster, the storage administrator wants to ensure that existing LUNs can use paths on the new nodes.What is required to complete this task?
Question23: Click the Exhibit button.As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
Question24: Click the Exhibit button.Referring to the exhibit, you installed a new AFF A250 HA system with FC at a customer site. The customer asks how many ports can be used for the Ethernet host connections.In this scenario, what would you tell the customer?
Question25: A customer requires encryption at rest on every node root volume.In this scenario, which two encryption solutions will fulfill this requirement? (Choose two.)
Question26: Click the Exhibit button.Referring to the numbers shown in the exhibit, which port on an AFF A220 controller is used as port e0M in ONTAP?
Question27: You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF A300 HA pair with two DS224C shelves with 3.8 TB SSDs without NSE in one stack.In this scenario, how would you add the shelf?
Question28: You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.In this scenario, which network interface is needed for each SVM to register with the name service?
Question29: In an ONTAP switched cluster, which three types of traffic travels over the cluster network? (Choose three.)
Question30: Click the Exhibit button.You are installing a new FAS cluster. The management network must be on tagged VLAN 11 for remote administration by a service provider.Referring to the exhibit, which two ports will allow service provider access to both cluster and node management LIFs? (Choose two.)
Question31: Which command would be used to measure the throughput and latency of traffic between nodes?
Question32: What is the default shelf ID for disk shelves with IOM12 modules?
Question33: You install a 4-node cluster with an AFF A400 HA pair and a FAS8300 HA pair. After setup, you are asked to review the audit logs on each controller from a Web browser.In this scenario, which method provides access to the logs from a Web browser?
Question34: You are setting up a peer relationship between two ONTAP clusters.In this scenario, which two statements are true regarding authentication?
Question35: You completed a 2-node AFF A700 installation according to the poster. You run the disk show -fields owner command and notice that all drives are assigned to node 1.In this scenario, which tool would you use to access documentation and guidelines to solve the issue?
Question36: You are preparing to install a new 2-node AFF A250 system at a customer site with an existing cluster that uses NetApp CN1610 cluster interconnect switches.In this scenario, what are two valid actions for this installation? (Choose two.)
Question37: After completing a technology refresh, you need to schedule a knowledge transfer with a customer. The customer asks you to address a number of topics during the meeting.In this scenario, which two topics would be appropriate to address? (Choose two.)
Question38: Which two SVMs are automatically created during the cluster setup? (Choose two.)
Question39: An ONTAP cluster is installed at a secure site. The array has no access to the Internet but is managed 24/7 by onsite engineers. The customer requires that when hardware failures occur, the failures are reported to the NetApp Support team as quickly as possible.In this scenario, which two tasks should be performed during the project hand-off procedure to satisfy the customer's requirement? (Choose two.)
Question40: You are expanding an existing 4-node ONTAP 9.8 cluster with a FAS8300 HA pair by adding a new FAS500f HA pair. Before the expansion, you are asked to save the configuration of the cluster to a backup file.In this scenario, which two ONTAP configuration backup methods are available? (Choose two.)
Question41: Click the Exhibit button.You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.For a high availability, which ports should swap Ethernet cables?
Question42: You completed an ONTAP cluster deployment as a reseller engineer. During the knowledge transfer process to the customer, they ask for proof that the array has correct multi-path HA cabling deployed and that the array is error free.Which documentation output would you present to the customer to satisfy this requirement?
Question43: Your customer is migrating data from a legacy FAS8020 system that runs ONTAP 9.5 software to a new AFF A250 MetroCluster over IP configuration.In this scenario, which two methods would be supported to migrate the data? (Choose two.)
