EMT Practice Test

1. Question Content...

---

Question1: A client has a FlexVol volume that is 10 TB in size and is nearly full. The volume has a Snapshot reserve of
5%, that is currently utilized at 120%. They have chosen to enable ONTAP to automatically delete the oldest Snapshot copies with a volume threshold trigger in order to free space within the volume when it becomes necessary.
In this scenario, what amount of space would be made available to the client, without additional intervention?

Question2: Click the Exhibit button.

You have a volume that was configured a year ago using the default Snapshot policy that is shown in the exhibit. You need to increase the number of hourly maximum Snapshot copies to retain only four copies.
Which additional action is needed to keep only four hourly Snapshot copies in this volume after modifying the schedule?

Question3: An ONTAP administrator is trying to configure a three-way-disaster recovery solution. Cluster 2 is within 50 km of Cluster 1, the primarycluster, with an RTT of 7 ms. Cluster 3 is over 300 km from Cluster 1 with an RTT of 29 ms.
In this scenario, what are two topologies that would accomplish this task? (Choose two.)

Question4: Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choose two.)

Question5: Click the Exhibit button.

Your customer wants to protect a volume and replicate it to a secondary volume. The customer has tried to configure this relationship using OnCommand System Manager. Upon reviewing this newly configured relationship, you discover that the configuration does not satisfy the customer's stated requirements.
Referring to the exhibit, what should you do to ensure that the volume is protected?

Question6: Data on an AFF system is replicated using SnapMirror to a FAS system that is configured
with NL-SAS-based storage.
In this scenario, which storage efficiency is lost on the SnapMirror destination?

Question7: You want to provide your team with a SnapProtect report that shows how many backups succeeded, were delayed, and failed over the last 30 days. You also want detailed information about the jobs, agents, and clients.
WhichCommCell report provides the necessary information?

Question8: You have deployed volume-level replication with NetApp Synchronous SnapMirror replication technology.
In this scenario, which two statements are true? (Choose two.)

Question9: You want to perform a health check of the MetroCluster synchronization status.
Which two actions should you perform? (Choose two.)

Question10: You received an alert from OnCommand Unified Manager (OCUM) that a NetApp FlexVol is almost out of space.
Which three actions are available to perform from the OCUM events detail Web page? (Choose three.)

Question11: A previous administrator had configured an external backup system to use node-scoped NDMP for backups, but you want to change this system to use SVM-scoped NDMP. How do you make this change in ONTAP?

Question12: Click the Exhibit button.

Commvault IntelliSnap and NetApp SnapCenter are both being used to back up the same Microsoft SQL Server database.
Referring to the exhibit, which action will SnapCenter perform on the Microsoft SQL transaction logs?

Question13: You want to have a NetApp FlexVol that can both grow and shrink dynamically as required by current capacity needs.
Which settings will enable this feature?

Question14: A volume has been filled completely by active data and Snapshot copies.
What must you do to make the volume writable again?

Question15: Your customer wants to implement a mirroring solution between two NetApp controllers.
Which solution would you recommend tothe customer?

Question16: You are creating daily SnapVault backups of a NAS volume that contains the data for your business critical application. You discover that corruption began two weeks ago on the data on that volume.
In this scenario, which statement is true?

Question17: Click the Exhibit button.

A customer wants to ensure that their volumes are protected. In ONTAP System Manager, under the Protectionsection, you see the screen that is shown in the exhibit. The company has an asynchronous mirror policy of less than a 60-minute lag.
Referring to the exhibit, which volume has a lag that exceeds the company policy?

Question18: You are performing a routine health check for a customer and need to determine if the disk shelf firmware is up to date. From My AutoSupport, which report would you use?

Question19: You have a NAS volume containing 100 GB of data and daily change rate of 10%. You want to keep seven daily Snapshot copies.
What is the minimum size for the volume?

Question20: A volume has been filled completely by active data and Snapshot copies.
What must you do to make the volume writable again?

Question21: In a MetroCluster IP configuration, which two network portsmust be connected to dedicated switches? (Choose two.)

Question22: You want to back up a critical Oracle database that resides on a LUN on the NetApp storage system. You decide that a Snapshot copy is the most efficient way to back up the database. You cannot afford to create any down time for the database.
What must you do to ensure that the data in the database is consistent when you create the Snapshot copy?

Question23: You are asked to enable WORM technology on a large amount of legal data. The legal team asks that a designated user group have the ability to delete files as needed.
What would satisfy the legal team's requirements?

Question24: A user's home directory, mounted using NFS, has been encrypted by a ransomware attack.
Theuser asks you to retrieve the data.
In this scenario, which process would allow you to accomplish this task?

Question25: Click the Exhibit button.

An employee's computer and mapped home folder has been encrypted with ransomware. You are asked to restore the data from a SnapVault repository.
Referring to the exhibit, what happens when the volume is restored?

Question26: Which two tools would you use toverify that an Oracle database has an application-consistent snapshot taken?
(Choose two.)

Question27: You must create and establish schedules for NetApp Snapshot copies and NetApp SnapMirror replication mirrors, and you need to manage them from a centralized location.
Which two products wouldsatisfy the requirements? (Choose two.)

Question28: To assist with capacity planning, your supervisor wants to receive weekly capacity summaryreports using e- mail for all on-premises ONTAP clusters. You are asked to implement a solution that has no additional software licensing costs.
Which action accomplishes this task?

Question29: Which two types of volumes support NDMP backup? (Choose two.)

Question30: In a clustered Data ONTAP environment, the customer is using SnapVault to back up data from aprimary to a secondary cluster.
Policies, Resource Pools, and Storage Efficiency are configured in OnCommand Unified Manager 6. OnCommand Workflow Automation takes care of the secondary provisioning. The customer wants to update the SnapMirror Policy witha custom Snapshot copy label.
What should be done to make sure that the Snapshot copies will be transferred to the secondary cluster?

Question31: You want to conserve disk space in your SnapVault destinations. You enable storage efficiency on each of the secondary volumes.
Which two statements are true in this scenario? (Choose two.)

Question32: What are two reasons why thestatus of the SnapMirror relationship is showing ~Healthy: false~? (Choose two.)

Question33: You have multiple load-sharing destinations for a volume in a storage virtual machine. The source volume has become unavailable and you want to make one of the destination volumes the new source.
What happens to the original source volume?

Question34: You are calculating transfer timefor SnapMirror replication between two NetApp clusters.
Which three factors should be included in your consideration? (Choose three.)

Question35: Click the Exhibit button.

A customer is interested in using SnapCenter tosupport Snapshot copies with their Oracle DB. They virtualized their environment but do not have any block protocols available.
In this solution, which protocol shown in the exhibit is supported?

Question36: You have deployed IntelliSnap to list NetApp Snapshot copies in volumes on your ONTAP system, schedule new backups on unprotected volumes, and implement archiving to your remote AltaVault system.
Which additional NetApp product does IntelliSnap require to perform all of these actions?

Question37: You must back up and replicate a Microsoft SQL server using SnapProtect in your clustered Data ONTAP environment.
Which three components must be correctly installed and configured? (Choose three.)

Question38: Your disaster recovery strategy requires a mirror, an archive, and a tape backup.
Which software would you recommend for this scenario?

Question39: You have a VMware VSphere environment with SRM and NetApp SRA fully configured.
Which twostatements are true? (Choose two.)

Question40: You have recently installed and set up a new NetApp HCI deployment in your data center that consists of four compute nodes and four storage nodes. Inside this HCI deployment, you are using ONTAP Select for file services. You must protect the data inside the ONTAP Select VM in case of a rack failure.
Which two methods would accomplish this task? (Choose two.)

Question41: After deploying an ONTAP Select 2 node HA cluster at a remote site, you successfully perform manual takeover and giveback before placing the cluster into production. After the cluster runs in production for a week, you notice that you can no longer perform a manual takeover.
In this scenario, what are two causes of this problem? (Choose two.)

Question42: Which product delivers application-consistent recovery across local and remote sites?

Question43: Which NetApp technology helps to protect against ransomware attacks?

Question44: Which OnCommand Workflow Automation (WFA) feature allows users to download prebuilt WFA packs?

Question45: You want to implement a cross-site disaster recovery solution for a mission critical business application that can provide a near zero recovery time objective (RTO) and recovery point objective (RPO). You want to use the existing high-bandwidth dedicated Ethernet and IP infrastructure for replication between the two sites.
Which NetApp solution meets these business requirements?

Question46: You have a SnapVault backup from your primary site to your secondary site with a LUN in the volume. In this scenario, what is transferred?
Response:

Question47: On a Windows host, you want to make a consistent database backup of a physical SQL server where the database is on iSCSI-connected LUNs on aclustered Data ONTAP system.
In addition to SnapDrive for Windows, which three NetApp software products should be installed to satisfy this requirement? (Choose three.)

Question48: Your customer has issued the metrocluster heal command.
Which two statements are true regarding this command? (Choose two.)

Question49: You are copying your data and replicating it off site. What is the called?

Question50: Your customer wants to implement a SnapVaultrelationship, but is concerned that the initial transfer will use up all of their network bandwidth.
Which solution should you recommend to the customer?

Question51: Click the Exhibit button.

Referring to the exhibit, which volume has the highest level of protection assigned to it?

Question52: A previous administrator had configured an external backup system to use node-scoped NDMP for backups, but you want to change this system to use SVM-scoped NDMP.
How do you make this change in ONTAP?

Question53: Which two tools would you use to verify that an Oracle database has an application-consistent snapshot taken? (Choose two.)

Question54: The volume efficiency modify command, enables which three storage efficiency technologies when applied to a FlexVol volume? (Choose three.)

Question55: You are performing a routine health check for a customer and need to determine if the disk shelf firmware is up to date.
From My AutoSupport, which report would you use?

Question56: You decide to enable SnapMirror network compression on your NetApp clustered Data ONTAP environment.
Which two statementsare correct about enabling this feature? (Choose two.)

Question57: Click the Exhibit button.

Referring to the exhibit, which three would be used to configure the three-way Data Center Disaster Recovery topology replication schedules? (Choose three.)

Question58: You wantto break a SnapMirror relationship and use a specific secondary Snapshot copy.
In an ONTAP environment, what should you do?

Question59: Click the Exhibit button.

You need to verify that you have a 10 Gb path between two clusters for SnapMirror traffic. Referring to the exhibit, how fast is the network path between the clusters?

Question60: A customer is using SnapCenter and they want to see details about: 1.) unprotected databases outside of resource groups, 2.) databases that have not been backed up during the report period, 3.) databases that belong to a resource group for which backups have failed, and 4.) the database SnapVault status.
In this scenario, which report type satisfies the requirements?

Question61: Click the Exhibit button.

A customer wants to have a local mirror and a remote mirror of their data.
Referring to the exhibit, which two solutions satisfy these requirements? (Choose two.)

Question62: You have experienced a disaster at your source site and activated SVM DR. The source site is now up, but your source SVMs no longer exist. You must restore data to the original source and maintain the SVM DR configuration.
Which two steps must be taken to accomplish this task? (Choose two.)

Question63: You want to write custom workflows to perform disaster recovery operations for your environment in OnCommand Workflow Automation.
In this scenario, which two scripting languages would be used to accomplish this task? (Choose two.)

Question64: Which two statements are correct about MetroCluster IP requirements for intercluster LIFs? (Choose two.)

Question65: A customer has deployed OnCommand Unified Manager and wants to use it to manage their data protection relationships within their NetApp storage infrastructure.
In this scenario, which additional component must be deployed to satisfy this requirement?

Question66: You want to ensure that you are using compatible hardware and software versions with your MetroCluster installation.
Which tool would accomplish this task?

Question67: You are asked to verify that data stored in your disaster recovery site can be restored and is viable. Currently, you have a NetApp SnapMirror relationship with a MirrorAllSnaps policy type that is enabled and is updating frequently.
What would be a nondisruptive method to carry out a detailed validation of your disaster-recovery strategy?

Question68: You are working for a customer that has deployed a large FlexGroup with ONTAP 9.5. This FlexGroup has a SnapMirror relationship to a system at a disaster recovery site. The FlexGroup is nearly full and needs to be expanded to accommodate additional data.
In this scenario, what must you do to expand the FlexGroup and ensure that the data remains protected?

Question69: Click the Exhibit button.

You have been receiving the lag status error notifications shown in the exhibit.
What must you do to correctthis problem?

Question70: A customer wants to maintain a single copy for both disaster recovery and backup on a secondary system.
Which SnapMirror policy andrelationship type should be used?

Question71: You have a network outage that affects client access to site
You need to temporarily reverse the SnapMirror relationship of a volume to serve data from site B.
Which two steps must you perform first? (Choose two.)

Question72: You have successfully deployed a primary and a secondary ONTAP cluster. You want to set up an intercluster SnapMirror relationship between your primary and secondary sites.
In this scenario, which two actions are required before accomplishing this task? (Choose two.)

Question73: You do not want to impact your ongoing SnapMirror relationship between your primary and secondary site.
Which step must be taken prior to creating a FlexClone at the disaster recovery site?

Question74: Click the Exhibit button.

Referring to the exhibit, whichsetting specifies the point that the vol_sanluns01dev_01 volume will increase in size?

Question75: All of your CIFS file shares reside on a single NetApp volume. You are asked to ensure that your files are kept for seven days locally, and for 30 days off-site.
What is the correct solution?

Question76: Click the Exhibit button.

You must set up SVM replication for the first time using CLI. This replication will be used for DR purposes.
The SVM configuration does not need to be replicated at this time. In this configuration, you will be reusing a default policy.
Referring to the exhibit, what are two missing steps from the SVM replication workflow? (Choose two.)

Question77: What does the metrocluster configuration-settings interface create command do?

Question78: A customer wants to modify the retentioncount of the SnapVault destination volume.
Which policy should be used modify the attribute?

Question79: You have an environment with multiple database servers that are performing scheduled nightly dumps. These dumps vary in both the time to complete and the size of data produced. You need to ensure that there is always enough room in the volume for the data and that a nightly SnapMirror update does not take place until the database dump process is complete.
In this scenario, which NetApp tool ensures that this process is completed every night?

Question80: A customer has a MetroCluster configuration and wants to automate the disaster recovery process for unplanned automatic switchover.
Which NetApp tool would accomplish this task?

Question81: A FAS2750 cluster administrator experiences network issues during replication updates that pass over a low- bandwidth WAN link to their DR site. They also replicate locally to another cluster for testing and development. The administrator wants to enable network compression only on the existing WAN Link SnapMirror jobs.
In this scenario, which statement is correct?

Question82: Click the Exhibit button.

Referring to the exhibit, which volume has the highest level of protection assigned to it?

Question83: A customeris running clustered Data ONTAP and wants to restore 15 files from a secondary SnapVault destination. The customer uses the command snapmirror restore - file-list.
Which two statements are true about this operation? (Choose two.)

Question84: You just created a mirror relationship using OnCommand System Manager in ONTAP 9.3.
You review the relationship using the CLI.
In this scenario, what is the expected type and default SnapMirrorpolicy?

Question85: A company has implemented a MetroCluster cluster. The company wants to use MetroCluster TieBreaker to monitor and detect failures of the cluster.
In this situation, which three components are monitored? (Choose three.)

Question86: A customer is using SnapMirror to replicate their data to a remote site. They notice that storage efficiency is nor preserved, and the amount of data at the destination is higher than expected.
In this scenario, which configuration in the destination volume would cause this issue?

Question87: A Windows user requests assistance to restore afile on a CIFS share that they have mistakenly deleted.
Which tool would restore the deleted file?

Question88: You have completed the baseline copy for a new inter-cluster SnapMirror relationship.
How do you verify the baseline without making the destination volume writable?

Question89: You want to set up an important management solution that must comply with FIPS 140-2. The solution should support a multi-clusters environment and should provide centralized management of the encryption keys.
In this scenario, which solution accomplishes the task?

Question90: When volumes are set to be thin-provisioned, what must be monitored for space usage?

Question91: You have a network outage that affects client access to site

Question92: You received an alert from OnCommand Unified Manager (OCUM) that a NetApp FlexVol is almost out of space. Which three actions are available to perform from the OCUM events detail Web page?
(Choose three.)

Question93: To ensure enough bandwidth for other applications, you want to restrict all replication bandwidth on your destination cluster.
How would you accomplish this task?

Question94: Your customer wants to deploy 40 ONTAP clusters in their environment to protect client databases, Windows host file systems, applications, and virtual machines. One of the primary monitoring and system management requirements is to use a centralized dashboard for all application-consistent backups and REST API integration.
In this scenario, which NetApp management tool satisfies the requirements?

Question95: A client is planning to configure a SnapMirror relationship between two sites. Normally their ISP provides network throughput of 100 Mbps; however, they can arrange to have this burst to 1 Gbps for a period of time at an additional cost.
Their intention is to back up 400 GB of Snapshot data each day using the burst option to keep the replication time to a minimum.
In this scenario, how much burst time do they need to purchase?

Question96: You recently set up a SnapMirror relationship with a daily update schedule. You want to verify that the updates are being performed daily.
Which two actions inside OnCommand System Manager would you ensure that the SnapMirror transfers are occurring daily? (Choose two.)

Question97: The customer wants to set up a disaster-recovery relationship between the NetApp SolidFire cluster and the NetApp FAS cluster.
Which two statements are true in this scenario? (Choose two.)

Question98: You have a NAS volume containing 100 GB of data and daily change rate of 10%. You want to keep seven daily Snapshot copies. What is the minimum size for the volume?

Question99: Click the Exhibit button.

A customer needs to add an additional X91143A card into a FAS9000 to allow mirroring between theproduction system and the disaster recovery FAS9000 platform. Slots 1, 4, 6, 8, and 9 have cards in them.
Referring to the exhibit, in which slot should you install the card?

Question100: Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choosetwo.)

Question101: A client decided to transition from a NetApp Storage Encryption environment that uses a KMIP-based centralized key management server to a NetApp Volume Encryption environment that uses onboard key management.
Which two steps are required to complete this task? (Choose two.)

Question102: A customer is using SnapVault to backup Snapshot copies from a primary volume to a secondary volume on a clustered Data ONTAP system.
The retention on the secondary volumes must be 90 days. Volume autosize andSnapShotAutoDelete have been enabled for all secondary volumes.
Which two settings will satisfy this requirement? (Choose two.)

Question103: You have a NAS volume that contains 250 GB of data with adaily change rate of 10%. You want to keep seven daily Snapshot copies.
In this scenario, what should the minimum copies of the volume be?

Question104: A volume on a FabricPool-enabled aggregate is consuming 10 TB of the performance tier and 90 TB of the cloud tier. A SnapMirror copy needs to be created on a FabricPool-enabled peer cluster at a disaster recovery location.
In this scenario, how much data is transferred when the SnapMirror relationship is initialized?

Question105: The customer has experienced a disaster at their primary data center. You have implemented a SnapMirror relationship to meet their needs. You have performed the steps to make the destination volume read/write accessible to the clients.
Which three actions should your considerdoing while the customer makes the necessary repairs to their data center? (Choose three.)

Question106: Click the Exhibit button.

Your customer is deploying SnapCenter to protect volumes on an ONTAP Select cluster.
Referring to the exhibit, which licensing is required to protect the Engineering and Marketing volumes?

Question107: You are planning to deploy MetroCluster IP. As part of the implementation strategy, you are asked to verify that youhave the relevant hardware for the deployment.
Which two elements are required to deploy your solution? (Choose two.)

Question108: Click the Exhibit button.

A client has a SnapMirror relationship between two sites that is scheduled to run once a day at 12:15 a.m.
They have a network connection between two sites thatprovides 100 Mbps on bandwidth. By performing the backup at this time, they can maximize their bandwidth use.
Referring to the exhibit, how long does the SnapMirror update take to finish?

Question109: Data on an AFF system is replicated using SnapMirror to aFAS system that is configured with NL-SAS-based storage.
In this scenario, which storage efficiency is lost on the SnapMirror destination?

Question110: You are implementing version flexible SnapMirror in a clustered Data ONTAP environment.
Which type of SnapMirror policy would be used?

Question111: You are monitoring data protection relationships of type XDR using OnCommand System Manager running ONTAP 9.5. In the GUI, you click Protection -> Volume Relationships.
In this scenario, which status in the Relationship State field must be displayed to ensure that the relationships are working as expected?

Question112: Click the Exhibit button.

You need to verify that you have a 10 Gb path between two clusters for SnapMirror traffic. Referring to the exhibit, how fast is the network path between the clusters?

Question113: Click the Exhibit button.
cluster2::>snapmirror show -instance
Source Path: svm1:svm1_vol3
Destination Path: svm1_2:svm1_2_vol2
Relationship Type: DP
Relationship Group Type: none
SnapMirror Schedule: 5min
SnapMirror Policy Type: async-mirror
SnapMirror Policy: DPDefault
Tries Limit: -
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Last Transfer Type: update
Last Transfer Error: -
Last Transfer Size: 72 KB
Last Transfer Network Compression Ratio: 1:1
Last Transfer Duration: 0:0:2
Last Transfer From: svm1:svm1_vol3
Last Transfer End Timestamp: 09/24 13:10:04
Progress Last Updated: -
Relationship Capability: 8.2 and above
Lag Time: 0:0:55
Number of Successful Updates: 1
Number of Failed Updates: 0
Number of Successful Resyncs: 0
Number of Failed Resyncs: 0
Number of Successful Breaks: 0
Number of Failed Breaks: 0
Total Transfer Bytes: 212992
Total Transfer Time in Seconds: 5
You want to view your SnapMirros relationship to make sure it is up to date. You issue the snapmirror show -instance command. Referring to the exhibit, how long has it been since the last SnapMirror update has successfullyoccurred?

Question114: You want to implement NetApp Volume Encryption on your ONTAP 9.3 cluster production volumes.
What are two ways to accomplish this task? (Choose two.)

Question115: Which two cloud providers allow you to provision Cloud Volumes ONTAP as a SnapMirror destination? (Choose two.)

Question116: Using SnapCenter 4.0, you are restoring a virtual machine.
Which additional tool would be used to monitor the restore?

Question117: Which two NetApp technologies allow for synchronous replication of data between two remote sites? (Choose two.)

Question118: You have just deployed a new AFF A400 cluster running ONTAP 9.7 that currently has no data aggregates created. You want to ensure that all new data aggregates are encrypted before you migrate production data to the new AFF A400 cluster.
In this scenario, which two actions would you use to accomplish this task? (Choose two.)

Question119: You are asked to provision some new storage for VMware. Which two tools are available to perform this task?(Choose two.)

Question120: You experience a node outage as a result of a component failure in a high-availability (HA) pair. You replace the failed component and get thenode booted up again, but are unable to perform the giveback operation. The onscreen error is:
"Connected to partner, Takeover is not possible: Storage failover mailbox disk state is invalid, Local node has encountered errors while reading the storage failover partner's mailbox disks. Local node missing partner disks" What are two ways to solve this problem? (Choose two.)

Question121: You have a project that requires off-site backup for selected data volumes, butanother physical site or system is not within the current budget.
Which NetApp product would help you to satisfy this requirement?

Question122: A customer is planning the cloud strategy for their Microsoft SQL databases and must be able to protect them from outages. They are planning on using multiple cloud providers for their solution with their current NetApp storage system.
In this scenario, which two products are required to satisfy their backup management needs? (Choose two.)

Question123: You are asked to protect your customer's Exchange environment. You deploy SnapCenter 4.1 and the plug-in for Microsoft Exchange Server. While creating the backup policy, you select the Full and Log Backup from the list of supported backup types.
In this scenario, what would the Full and Log Backup type allow you to protect within Exchange?