EMT Practice Test

1. Question Content...

---

Question1: What is the function of the virbr0 bridge on AHV?

Question2: How should an administrator configure a custom alert for a specific VM in Prism?

Question3: Which SSL Files required for Importing Key and certificate (Choose 2)

Question4: An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which two methods can be used to anonymize the log data sent to Nutanix Support? (Choose two.)

Question5: An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.

Which three steps must the administrator take to increase throughput to the host? (Choose three.)

Question6: How many IP addresses are required for a new Files cluster deployment?

Question7: An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.
Which steps should the administrator perform next?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.

Question8: An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.
Which metrics should the administrator review in Prism Analytics Graphs?

Question9: An Administrator is working on a one-node ROBO cluster configurations
Which statement is true for this configuration?

Question10: Which two methods can be used to create VMs with UEFI firmware? (Choose two.)

Question11: CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.
How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?

Question12: An administrator needs to run a mixed Exchange and SQL workload with a guaranteed amount of container space for each application.
How should the administrator meet this requirement?

Question13: How should an administrator make sure that the LCM Framework is always up to date and upgraded to the latest version?

Question14: What is the purpose of a Leap availability zone?

Question15: Refer to the exhibit.

System Non-Root Partition Usage shows a warning or critical alert The administrator needs to change the frequency of checks and alerts to respond more quickly.
Where in Prism Element should the administrator change the frequency of checks and alerts?

Question16: Deduplication is enabled on a container in a hybrid cluster. The administrator sees no disk space savings.
Which two configurations are causing this issue? (Choose two.)

Question17: How will an HDD failure affect VMs with data on the failed device?

Question18: A vDisk is read by multiple VMs. The cluster creates immutable copies of the vDisk. What are these vDisk copies called?

Question19: Which Nutanix product or feature would support the replacement of a storage appliance for shared home directories?

Question20: Clusters are configured with an http proxy server an administrator wants to deploy prism central Which scenario require to the administrator to configure the http proxy whitelist method?

Question21: what command is used to run the nutanix cluster checks from the CVM CLI?

Question22: Where are Leap Availability Zones configured?

Question23: An administrator needs to power down an AHV node in order to replace a failed DIMM?
Which step should the administrator take after placing the node into maintenance mode?

Question24: An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

Which metrics should the administrator review in Prism Analysis Graphs?

Question25: A new Nutanix node includes Which license by default?

Question26: A customer has a 4-node cluster running at 80% capacity. One node fails due to a motherboard issue.
What is the effect?

Question27: What requires iSCSI initiator configuration in the guest OS to use Volumes?

Question28: * 20 sites with two-node clusters in Singapore
* 20 sites with two-node clusters in Japan
* 30 sites with two-node clusters in Australia
The HQ and main datacenter is based in Hong Kong.
What is the minimum number of Witness VMs the administrator should configure at the Hong Kong HQ datacenter?

Question29: The external identity source (e.g., Active Directory) is unavailable.
Which account should be utilized as the Emergency Local Account lor both Prism Element and the CVM?

Question30: Which Prism Dashboard should be used to collect CPU/Memory and Disk I/O statistics over time?

Question31: Which two private key types are supported by the Nutanix SSL certificate implementation? (Choose two.)

Question32: When license needs to be reclaimed from Host: ( Choose 2)

Question33: through what interfaces is/are (anti-)affinity rules configured. (Choose three)

Question34: When VM HA Reservation is enabled, what is the expected behavior for all failed VMs in the event of a host failure?

Question35: A guest VM should be able to tolerate simultaneous failure of two nodes or drives.
What are the minimum requirements for the Nutanix cluster?

Question36: A two-node ROBO cluster is configured with a witness VM.

What happens when Node A goes down?

Question37: An administrator is configuring cross-hypervisor DR from an ESXi cluster to a new AHV cluster. When the administrator migrates a protection domain to the AHV cluster, the VMs fail to boot.
What should the administrator do to correct this problem?

Question38: An administrator has an existing Nutanix cluster that is configured to protect VMs using. Time Stream. The administrator now needs to add support for protecting these VMs in AWs.
Which two changes must be made to the cluster to meet this requirement? (Choose two)

Question39: the analysis dashboard allows you to create which 2 type of charts? (Choose two)

Question40: Refer to the exhibit.

The Linux Admin role has been created to manage only Linux VMs in the environment. However, the Admin1 user does not have access to all Linux VMs.
What step should be taken to grant the proper access?

Question41: An organization has a 3-node cluster, with utilization rates as follows:
* 35% CPU
* 40% RAM
* 20% SSD
* 35% HDD
A node in this cluster fails.
Which type of degradation will the client experience due to this node failure?

Question42: An administrator sets up a protection domain that replicates to a remote site. The administrator must perform DR test every 6 months.
Which snapshot is used when activate is checked on the remote site`s production domain?

Question43: An administrator has an existing Nutanix cluster that is configured to protect VMs using. Time Stream. The administrator now needs to add support for protecting these VMs in AWs.
Which two changes must be made to the cluster to meet this requirement? (Choose two)

Question44: A two-node ROBO cluster is configured with a witness VM.

What happens when Node A goes down?

Question45: A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.
What occurs to the cluster and these VMs during an AHV upgrade?

Question46: Refer to the exhibit.

System Non-Root Partition Usage shows a warning or critical alert The administrator needs to change the frequency of checks and alerts to respond more quickly.
Where in Prism Element should the administrator change the frequency of checks and alerts?

Question47: An administrator wants to use Volumes to connect to physical servers that are not able to be virtualized.
Which three things must be configured for Volumes to support iSCSI clients? (Choose three)

Question48: An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which method should be used to anonymize the log data sent to Nutanix Support?
A)

B)

C)

D)

Question49: A two-node ROBO cluster is configured with a witness VM.

What happens when Node A goes down?

Question50: An administrator wants to configure Near Sync an AOS 5.15 implementations. The Cluster has the following characteristic
1)2 nodes at both the primary and remote site
2)60 TB of storage on each node
3)1.9 TB SSD disks in each node
4)8 VMs per protection domain
5)A mix of ESXi and AHV hypervisor
What three steps would need to be taken successfully enable Near Sync? (Choose Three)

Question51: An administrator is creating a new windows VM in AHV after migrating its data from ESXi Which two parameters should be set identically to the VM settings in ESXi? (Choose two)

Question52: An administrator manages a 4-block 16 node Nutanix cluster. One block experiences a Power Delivery Unit (PDU) failure. All nodes in that block power off. VMs on the affected nodes restart as expected. The cluster continues normal operation until power is restored.
Which Nutanix feature is responsible for maintaining operations in this scenario?

Question53: A customer has a 24-node cluster with all containers configured with RF3. Two different nodes have incurred a simultaneous HDD failure.
What is the result?

Question54: An administrator needs to move a Nutanix host from one cluster to another.
Which step should the administrator take after evacuating VMs from the host to be moved?

Question55: An administrator needs to run a mixed Exchange and SQL workload with a guaranteed amount of container space for each application.
How should the administrator meet this requirement?

Question56: An administrator wants to use Volumes to connect to physical servers that are not able to be virtualized.
Which three things must be configured for Volumes to support iSCSI clients? (Choose three)

Question57: An administrator needs to ensure that resource are reserved so that all VMs are able to restart in the event of a host failure.
Which steps should the administrator take to ensure the cluster is configured and operating appropriately?

Question58: An administrator needs to run a mixed Exchange and SQL workload with a guaranteed amount of container space for each application.
How should the administrator meet this requirement?

Question59: An administrator is preparing to migrate VMs from a legacy ESXi cluster to a new AHV cluster.
Which action must be the administrator perform on the AHV cluster to migrate VM data?

Question60: What policy would maximize throughput for the brO uplink of a host?

Question61: In an AHV cluster, an administrator needs to enable an application to share a disk b group but needs to enable the VMs to see the volume group.
How should the administrator accomplish this task?

Question62: An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.
Which steps should the administrator perform next?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.

Question63: An administrator is deploying a SQL database that is licensed by the number of physical CPU cores available to the application.
Which feature can be used to minimize licensing costs?

Question64: Async DR is configured between two sites. A network outage occurs at the primary site.
Which steps must the administrator perform to bring the VMs back into service at the backup site?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

Question65: What is default behavior for VM High Availability for Nutanix AHV?

Question66: Which configuration should an administrator make in Prism to receive a summary of the alerts every 24 hours?

Question67: An administrator is configuring data protection and DR for a multi-tier application. All VMs must be protected at the same time.
What must the administrator do to meet this requirement?

Question68: What is the expected behavior of the VMs residing on that host when a controller VM becomes unavailable?

Question69: A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements.
Only three nodes in the cluster meet this requirement.
The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.
How should the administrator perform this task?

Question70: Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)

Question71: A customer has a newly-deployed AHV cluster with nodes that have 2.x 10 GBE and 2.x interface. The customer wants to use all available network interfaces to provide connectivity to the VMs.
Which option should the administrator use to achieve this while remaining consistent with Nutanix recommendations?

Question72: An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.

Which three steps must the administrator take to increase throughput to the host? (Choose three.)

Question73: Which change can be made on a cluster with software-based Data-at-Rest Encryption enabled?

Question74: Which best practice should be followed when creating a bond in a Nutanix cluster?

Question75: A Nutanix administrator needs to replace a self-signed SSL certificate with a CA generated certificate in Prism.
Which three files are required to install the CA generated certificate in Prism? (Choose three)

Question76: An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.
Which steps should the administrator perform next?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.

Question77: When configuring Prism Central, which two log modules are able to forward messages to an external syslog server? (Choose two.

Question78: An administrator has been tested with storing Nutanix snapshots at an off-premises location. The administrator does not have a second Nutanix cluster to use.
Which two servers could be utilized as remote sites for snapshots? (Choose two)

Question79: what command initiated from a cvm, is used to view the pNICs on all AHV nodes?

Question80: What is Prism Central primarily used for?

Question81: In Nutanix clusters, which feature ensures VMs can be migrated and restarted on another host in case of failure?

Question82: An administrator needs to configure the cluster to ensure all VMs are capable of being restarted in the event of a host failure.
Which option provides this functionality?

Question83: An administrator is trying to create an additional account on the Nutanix cluster in Prism Element but is unable to create new users.

Question84: Users report that data mining workloads on a single node in a Nutanix cluster are slow.
Which method should the administrator use to determine what may be causing this issue?

Question85: what does an administrator do before shutdown nutanix node for maintenance in the cluster? (Choose two)

Question86: An administrator needs to manage VMs from Prism when the cluster is running on ESXi. The VM management options in Prism are grayed out and unavailable.
Which procedure should the administrator complete to manage VMs from Prism when using the ESXi hypervisor?

Question87: Which Nutanix Product combines the Distributed Storage Fabric & App Mobility Fabric?

Question88: Async DR is configured between two sites. A network outage occurs at the primary site.
Which steps must the administrator perform to bring the VMs back into service at the backup site?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

Question89: In the event of failed CVM, what happens to the physically attached storage for the node and the VMs running on it?

Question90: An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.
What are two impacts on the cluster? (Choose two)

Question91: Which three licenses can be applied from Prism Central? (Choose three.)

Question92: An administrator has observed that when an all- AHV host restarts unexpectedly one VM it hosts does not restart as expected.
Which cluster on VM configuration explains this behavior?

Question93: How should an administrator enable secure access to Volumes using a password?

Question94: An administrator needs to take a single node down for maintenance. Which two steps should the administrator take? (Choose two)

Question95: What certificate must be installed on the cluster to support client certificates?

Question96: What is the proper sequence to perform a one-click upgrade to a Nutanix cluster?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

Question97: What are two minimum prerequisites for live migration to succeed? (Choose two.)

Question98: The feature that enables you to back up and restore copies of virtual machines and files to and from an on-prem cluster and a Nutanix Controller VM on the Amazon Web Service (AWS) or Microsoft Azure cloud.

Question99: An administrator is configuring a container for a VM that will perform a data processing workload. Which compression technology is preferred for this type of workload?

Question100: Which Nutanix feature allows a Nutanix cluster to present iSCSI storage to an external devices?

Question101: An administrator is trying to set up Role Mapping. A dialog box states: Directories have not been configured for Role Mappings.
What must the administrator do to fix this issue?

Question102: Which two capabilities does IPAM provide in a Nutanix networking configuration? (Choose two.)

Question103: When VM HA Reservation is enabled, what is the expected behavior for all failed VMs in the event of a host failure?

Question104: An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.
Which steps should the administrator perform next?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.

Question105: Which Mechanism that works by data striping and parity calculation?

Question106: Which best practice should be followed when creating a bond in a Nutanix cluster?

Question107: An administrator's cluster experiences a CVM failure. However, VMs on the nodes continue to produce I/O.
Which Distributed Storage Fabric can be attributed to this behavior?

Question108: An administrator wants to be able to manage their application from prism central.
Which feature must the administrator enable to allow for application management?

Question109: Which three upgrades should an administrator be able to perform using Lifecycle Management? (Choose Three)

Question110: An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.
What are two impacts on the cluster? (Choose two)

Question111: An administrator wants to connect a VM to Volumes
Which network should the VM be connected to for iSCSI access?

Question112: Refer to Exhibit.

An administrator increases the cluster RF to 3. The containers are not modified.
What will the new values in the data resiliency dashboard be for FAILURES TOLERABLE for the Zookeeper and Extent Groups components?

Question113: The administrator wants a container to be displayed and limited to 1TB in the hypervisor.
What advanced container setting must the administrator set?

Question114: What is the expected operation during node addition when the new node has a different AOS version?

Question115: CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.
How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?