EMT Practice Test

1. Question Content...

---

Question1:

An administrator has run a multi-step Playbook. but sees the Failed status, as shown in the exhibit.
What could be causing the playbook to fail?

Question2: What is included in the PagerDuty Integration service during configuration?

Question3: What should an administrator do to enable Quotas?

Question4: What minimum requirement is necessary to enable Self-Service (formerly Calm) policies for scheduling and approval tasks?

Question5: A company has started a new project team and has asked an administrator to build the first blueprint for a new public cloud environment that was defined last week. This will be the first deployment to AWS.
The administrator has been given the following information:
VM Name: web01-@@{unique}@@
IP Address: Provider-assigned
OS version: Windows Server 2016
Deployment location: AWS
Region: us-west-1
Project: Default
What should the administrator do first when building the first blueprint?

Question6: Which action should an administrator use to request a static IP address from an IPAM solution?

Question7: Which two platforms does Calm support for Cost Showback? (Choose two.)

Question8: Which option is used to test or validate scripts before deployment?

Question9: A blueprint service needs to use scaling. The requirements are:
Windows 2019 VM (12 vCPU, 24 GB memory, 500 GB volume)
Minimum VMs needed at any time and at time of deployment is 2 VMs
VMs should not exceed the project quota of 100 vCPUs or 300 GB of memory There are no other services in use within the project Which scaling VM replica settings meet all requirements?

Question10: What is a Category?

Question11: What are Self-Service (formerly Calm) Substrates?

Question12: An administrator has been asked to review and clean up all existing categories within the Nutanix environment.
What information should the administrator filter on to organize the findings and eliminate unused categories?

Question13: Which graphic interface allows components and their dependencies within an environment to be visualized and configured?

Question14: An administrator would like to be notified each time a subset of VMS within the Environment:Dev category is restored from snapshot.
Which trigger should the administrator use to satisfy this requirement?

Question15: Exhibit.

What ports should be opened? (Choose two.)

Question16: An administrator did not specify scripts under any of the Stop service-level actions, so the system didn't generate any orchestration edges.
What should the administrator do to prevent this?

Question17: What is the correct method to upgrade Calm?

Question18: An administrator wants to execute a package install task to create an application using NDB.
The following method is currently used to perform this task manually:

How can the administrator ensure that checks can be implemented in a single task?

Question19: A Consumer has been tasked with deleting a running Calm managed application. How can the Consumer ensure all underlying VMS are deleted with the removal of the application?

Question20: In order to give Consumers the ability to modify attributes, what should the Blueprint creator implement in the design?

Question21: A developer has been asked to update the existing blueprint with an additional option of scaling it both out and in.
Where in the Blueprint Editor should the developer make the relevant changes?

Question22: While creating a Runbook, which type should an administrator select to performed a REST API call?

Question23: An administrator is notified of changes made to VMs on an AHV cluster and wants to verify the changes inside of a Calm application.
Where should the administrator check for synchronized changes between Prism Central and Calm?

Question24: An administrator is providing users with access to the company's LOB applications through a VDI solution.
The administrator received information that the company are going to hire 200 new employees who will be using these applications.
The environment is monitored by a third-party tool that notifies the administrator when the VDI solution is about to run out of capacity. This gives the administrator time to create additional resources and add them to the VDI solution.
What should the administrator use when creating a playbook to automate this?

Question25: Which two groups of operations can a Prism Admin or Super Admin role perform? (Choose two.)

Question26: An administrator has an existing set of VMs that were deployed before the company started using Calm. The administrator would like to now use Calm to manage those existing VMs.
What should the administrator do to manage the existing VMs?

Question27: How should an administrator enable Calm?

Question28: An administrator notices a Blueprint fails with the following error for Windows machines:
script execution has failed with error Process creation failed with error:1314 What is causing this issue?

Question29: An administrator wants to execute a post-create task that will trigger an API call to create a front end application.
Which task type should the administrator use?

Question30: A new monitoring application is being rolled out across the Organization. An administrator has been tasked with automating the installation of the local agent on all Linux VMs.
The current environment has the following VMS deployed:
18 VMS created pre-Calm adoption.
32 VMS created post-Calm adoption.
Which action should the administrator take to automate this deployment for existing VMs?

Question31: An administrator has a Linux VM that does batch processing out of a queue. Currently, a technician connects to the VM console and runs a command on the VM to initiate or terminate the batch processing application, as there is no programmatic interface for the application.
The application is processor intensive, so it should only run outside of business hours. The VM has the ability to send REST API calls to Prism.
How should the administrator configure a Playbook to satisfy the needs of this process with minimal external interaction?

Question32: What action will be performed if the VM named ORACLE gets CPU constrained?

Question33: How often does Self-Service (formerly Calm) automatically clean up the database?

Question34: Which two providers does Calm integrate natively with? (Choose two.)

Question35: Refer to the exhibit.

Calm encountered the error shown in the exhibit when importing a script that maps a network drive.
Upon further investigation, the Calm administrator was unable to run the script manually on a VM and discovered that elevated permissions were needed.
Which command should the administrator add to the script?

Question36: An administrator needs to send a notification to the on-call administrator if a specific mission-critical VM is rebooted after hours, as well as send an email to the Operations team for any other VMS that reboot.
What two actions should the administrator take to accomplish this task? (Choose two.)

Question37: Which two statements are true regarding the Nutanix public Github repository? (Choose two.)

Question38: Refer to the exhibit.

An administrator created the Playbook shown in the exhibit to allow for manual reduction of vCPU count on any selected VM within their environment. During a test run of the play on one of the VMs running in development, the administrator ran into an error that the Playbook cannot be completed against the selected VM.
Here are the details of the affected VM:
VM Name: VM2
vCPU: 4
RAM: 8 GB
OS: Windows 2016
Hypervisor: AHV
What caused this Playbook to fail?

Question39: Exhibit.

An organization has decided to enable the self-Service (formerly Calm) Showback feature, but started to receive an alert in Prism Central stating that showback is not able to reach the Beam service.
Which configuration item should the administrator check to ensure Self-Service can communicate with Beam?

Question40: An administrator is tasked with setting up a Policy Engine for a Calm VM.
What information does the administrator require to complete this task?

Question41: When can a variable be updated during a Runbook execution?

Question42: What two view options are available when launching Calm blueprints? (Choose two.)

Question43: An administrator has been tasked with creating a multicloud, three-tier application using Calm. The application needs to consist of:
A MongoDB backend database
A NodeJS Javascript runtime environment
An NGINX webserver
The administrator has access to an AWS account, as well as a locally hosted Nutanix cluster. The three parts of the application should be fully redundant, and be able to tolerate either a cloud provider outage, or a local Nutanix cluster outage.
What is the most appropriate solution the administrator should choose in order to meet the requirements?

Question44: A task has failed in a Multi VM Blueprint deployment due to a typographical error. The error has been fixed.
What action should the administrator take to launch the Blueprint again?

Question45: During the deployment of a multi-step Blueprint, a failure is encountered. The administrator corrected the failed step and saved the Blueprint.
What should the administrator do next?

Question46: Which two features does the Calm Marketplace provide? (Choose two.)

Question47: When a developer launches the created Blueprint within the Blueprint Editor, the application gets deployed correctly. However, when the Blueprint is launched via Marketplace, it gets a check login error.
What is causing this issue?

Question48: What option is-included in the Macros Virtual Machine Common Properties?

Question49: An administrator is unable to launch a Calm blueprint (new and old).
Launching an existing blueprint under this condition fails with the error message:
The project for this blueprint does not have any associated Nutanix account.
Downloading and uploading the new blueprint also fails with
Launch with Variables' Profile expected to fall as Windows Server VWs attached with deleted Account.
Please modify them to use different account and try again.
Why is the administrator seeing this issue?

Question50: In which two ways can Calm be deployed? (Choose two.)

Question51: What is the prerequisite before a Single-VM Blueprint in Self-Service (formerly Calm) can be published to the Marketplace?

Question52: Why is an administrator unable to update the running configuration for a mufti-VM application in AWS using the Manage tab for the application in Calm?

Question53: An administrator wants to create a blueprint for a development environment that uses an existing on-premise GitLab repository. Every new development environment requires a new user in the GitLab repo.
Which two tasks should the administrator perform within a Calm blueprint to automate this process? (Choose two.)

Question54: An administrator needs to deploy blueprints to Calm SaaS and begin executing them, Before the administrator can execute a blueprint, what must be configured in the environment where the blueprint will be deployed?

Question55: Which Calm feature enables the ability to enforce project quotas for the ESXi hypervisor?

Question56: Exhibit.

The user would like to take a snapshot, expand the vDisk and get the result with a Slack message triggered by a pipeline CI/CD.
What trigger should be used?

Question57: An administrator has been tasked with automating the optimization of plays with the autopilot feature.
What must the administrator be aware of before configuring autopilot?

Question58: An administrator needs to simplify daily operations within Prism Central for multiple clusters. Which entity can a category be assigned to?

Question59: An administrator needs to create a Playbook to be notified when VMs are deleted.
Which X-Play Trigger would satisfy this task?

Question60: A developer is building a Blueprint that deploys a Redhat Enterprint Linux VM on vSphere. During the testing of the Blueprint to prepare it for users, it is discovered that the App deployment fails with the error.

What is the cause of this errors?

Question61: An administrator needs to restore a snapshot from a VM running in AWS that was created with a single VM blueprint Within.
which Calm tab should the administrator perform this task?

Question62: Exhibit.

Which task should be used in order to wait 60 seconds before continuing with the next task?

Question63: Save Playbook
Given input is invalid. No existing secret params found. password cannot XXXXXXX have value.
An administrator is receiving the error shown in the exhibit while saving the Playbook.
What is causing this issue?

Question64: Where would a Self-Service (formerly Calm) developer find detailed and downloadable logs for analyzing a Blueprint deployment failure?

Question65: Exhibit.

An administrator needs to add pre-create tasks and install package in the VM, but all options are grayed out.
What is the issue?

Question66: What is one prerequisite for deploying Self-Service (formerly Calm)?

Question67: Which two items are required to create a Category via automation? (Choose two.)

Question68: A company has a business-critical VM. The VM Utilization of CPU and memory differs from time to time, but can never be allowed to run out of resources. The administrator also wants to make sure that the VM is not over provisioned when not needed.
The administrator determines these requirements that have been validated and automated in a test environment should also apply for the production environment:
VCPU needs to be added when CPU Utilization been over 80% for 15 minutes.
Memory needs to be increased by 4 GB when utilization reaches 80%.
Return of over-allocated resources must not affect other business applications.
What can the administrator do with the least amount of effort to make sure the VM is always performant and returns resources when not required?

Question69: In which two locations can an administrator look to view a list of executed playbooks? (Choose two.)

Question70: Which Providers are supported in Multi-VM Blueprints? (Choose two.)

Question71: A developer has been asked to ensure that when a Blueprint is executed. an IP address is reserved in the IPAM system before the execution can continue. The developer must achieve this with the least amount of work.
How should the developer satisfy this requirement?

Question72: An administrator had provided Linux VM console access to the OS Team. However, the team is unable to access one of the newly-created Linux VMs.
How can the administrator resolve this issue?

Question73: Which two providers are supported in Calm? (Choose two.)

Question74: Refer to the exhibit.

What needs to be done in order to enable the developer to complete this requested task? (Choose two.)

Question75: An IT Director is concerned about the available storage capacity. The Nutanix environment has 200T3 of usable physical storage, but users have over-provisioned the environment in excess of 700TB. The cluster administrator has enabled compression. The IT director would like to be notified before storage capacity runs out.
What should the administrator do, to report the used capacity to the IT Director?

Question76: An administrator is trying to delete a category, but the option is greyed out.
Which two conditions could be causing this issue? (Choose two.)

Question77: When configuring Calm to use Kubernetes as a provider, what two options does an administrator have as Kubernetes types? (Choose two.)

Question78: An administrator at a busy software development company is looking to roll out Calm for automation and estimates they will be creating 200 Projects, 500 Runbooks, 1500 Blueprints and automating the deployment of 7500 VMs for their development teams.
What size of Prism Central VM(s) is recommended to host the Calm environment?

Question79: What role must a user have in order to create or update a Playbook?

Question80: An administrator needs to notify the on-call pager after hours using their PagerDuty incident management platform.
How should the administrator integrate notifications via PagerDuty in a Playbook using the least number of configurations possible?

Question81: Where would a Calm administrator find the archived application logs within Prism Central?

Question82: An administrator is creating a Single VM blueprint to deploy a windows 2019 Server.
As part of the package install phase of the deployment a task is needed to join the newly-provisioned server to an Active Directory domain.
In which order should the administrator correctly complete this task?

Question83: Refer to the exhibit.

A Blueprint fails on executing a check-login task against a Windows 2016 VM and displays the error shown in the exhibit. The administrator is using a SSH key-based credential to authenticate the task.
What should the administrator change to resolve the issue?

Question84: What is the default Connection timeout(sec) value, in seconds, for an HTTP endpoint?

Question85: Within a Calm blueprint, which two actions can an administrator apply to a Service under the Guest Customization section? (Choose two.)

Question86: The administrator has already added the power off and power on actions to the new playbook.
Which two additional playbook actions should the administrator add? (choose two.)

Question87: Which permission level grants access to Create, Update, Delete, and Duplicate Blueprints?