EMT Practice Test

1. Question Content...

---

Question1: If there are multiple network devices reporting flow data to Cascade and two devices report flow records for the same TCP connection, what will Cascade report?

Question2: NetExpress provides a good solution in which of the following environments?

Question3: Where does Cascade Profiler get QoS values from?

Question4: What are security alerts that are triggered by Cascade Profiler? (Select 4)

Question5: Refer to the exhibit.

From the Quick report in the Cascade Profiler GUI, which choice should be used if you want to create a report based on a subnet address (e.g. 192.168.1.0/24)?

Question6: In the Cascade Profiler GUI, what best describes a Dashboard?

Question7: Which of the following cannot be used for defining the Component of a Service?

Question8: NetProfilers System а Information page shows Overall Storage Status as red when: (Choose four.)

Question9: You can export a report in Cascade Pilot:

Question10: In the Database Performance Module, the Response Time (First Response) (sec) metric refers to:

Question11: What benefit can Cascade provide with no WAN optimization product deployed?

Question12: Which of the following is a supported alerting mechanism for events?

Question13: What packet filter functions are used in Packet Analyzer?

Question14: Host Name Resolution can be modified in Configuration/UI Preferences. What are the three choices that you can select for resolution? (Select 3)

Question15: To drill down and analyze a file within Cascade Pilot, you should. (Select 2)

Question16: Cascade Profiler encrypts data at rest with.

Question17: In the Cascade Profiler GUI, which Email Formats are supported for Notifications? (Select 2)

Question18: In the Cascade Profiler GUI, what are the different ways an "Application" is defined? (Select 2)

Question19: To receive external notification for Cascade Profiler Alerts:

Question20: After installing a new Cascade Express how long must you wait before the data collected is available for use?

Question21: Cascade Profiler is able to report traffic using two different approaches (centricities). Two approaches can result in different results when using the same report criteria due to the way data is aggregated and counted. What are these two approaches? (Select 2)

Question22: What are the supported speeds on the Cascade management interfaces?

Question23: Under Layer 4 Mappings, the available Application List settings arE. (Select 3)

Question24: A Watch in Cascade Pilot: (Select 3)

Question25: Which of the reports for monitoring Services include an Event List including Event IDs of the underlying alerts that were triggered from policy violations?

Question26: In Cascade Profiler, how many items can be displayed in a single watched list in a Dashboard Content Block?

Question27: Which of the following statements is true regarding SNMP polling and NTP syncing among Cascade components?

Question28: Cascade Shark can be configured to export data to Cascade Profiler. Data exported includes:

Question29: When Flow Data is being forwarded from a _____ to a 3rd Party Flow collector it is _____

Question30: Which mode should be enabled to monitor traffic in high-throughput environments such as server farms or data centers?

Question31: What are the default credentials to log into the Cascade Shark appliance Web Interface?

Question32: What is a benefit that Cascade might provide to Network Engineering? (Select 3)

Question33: What version of Windows is/are supported by the Cascade Active Directory Connector? (Select 2)

Question34: A trace clip is used within Cascade Pilot for:

Question35: Cascade Profiler flow logs can be stored on which of the following?

Question36: A company would like to have the Cascade Profiler report DNS-derived host names in reports. To allow this the Cascade Profiler must be configured by:

Question37: What Operating System is required for installation of Cascade Pilot?

Question38: What are some additional values a Cascade Sensor provides?

Question39: What are some reports Cascade Profiler provides to benefit WAN management?

Question40: Time control in Cascade Pilot is useful when you: (Select 2)

Question41: Authentication mechanisms supported by the Cascade Profiler arE. (Select 2)

Question42: Which of the following supports the largest number of Cascade analytics?

Question43: Packet Analyzer supports NetShark job traces that are over 2TB in size.

Question44: For Cascade Profiler, Where can a user customize which recipients (SMTP and/or SNMP) are alerted when different severity events from different policies are triggered?

Question45: How can you gracefully reboot the AppResponse Appliance? (Choose two.)

Question46: When analyzing protocols using a solution such as Cascade:

Question47: A SPAN port or Port Mirror is:

Question48: Within Cascade Profiler, how can you create a definition that includes list of tcp ports?

Question49: What statements are true regarding Cascade Sensors? (Select 3)

Question50: Protocols that are typically monitored in TCP/IP networks by visibility tools include (Select 3):

Question51: Fill in the blanks. Using _____ based technology you can query a networking device for statistics such as number of packets and bytes sent out an interface. Using _____ you can export conversation details (including number of bytes and packet per conversation) providing greater granularity into each conversation through a device.

Question52: In the Cascade Profiler GUI, which of the following Host Group Types are available as default examples?
(Select 2)

Question53: When drilling down from a Cascade Profiler traffic report to analyze the underlying packets in Cascade Pilot, which of the following best describes the interaction between Cascade Profiler, Cascade Pilot, and the Cascade Shark appliance?

Question54: A trace clip created with Cascade Pilot is:

Question55: How do you set the time zone of a Cascade Shark appliance?

Question56: Using the Cascade Active Directory Connector, a Cascade Profiler will be able to see:

Question57: Which options are available for collecting data on the Cascade Shark appliance? (Select 3)

Question58: To leverage the AppResponse Citrix Module, you must install a collection agent.
What Citrix product does the agent run on?

Question59: Within NetProfile, how do User-Defined Policies differ from policies such as the Application Performance Policy, Link Congestion Policy, and Link Outage Policy?

Question60: Which Cascade product runs under Riverbed Service Platform (RSP)?

Question61: In the Cascade Profiler GUI, what do the QoS values mean?

Question62: On Cascade Profiler, which of the following are configurable from the Configuration> User Interface Preferences interface? (Select 4)

Question63: Which technology can be used to determine that a TCP Reset has been sent from a server to client?

Question64: Which tools can be used to perform a deep dive packet inspection from AppResponse?

Question65: Time Control within Cascade Pilot allows:

Question66: What is the maximum number of 1GB capture ports that can be provisioned on the Cascade Shark appliance model CSK-03200?

Question67: What is the minimum number of physical chassis required in a Cascade deployment using a standard Profiler?

Question68: If one has a Service Health dashboard widget included on a dashboard, will all newly created Services automatically appear on that dashboard widget?

Question69: How are ToolTips located in the Cascade Pilot user interface?

Question70: How do you verify that the Cascade Profiler has been successfully installed and configured?

Question71: The write-to-disk speed on the Cascade Shark Appliance:

Question72: The exhibit includes a portion of the Cascade Pilot interface and shows:

Question73: In the Cascade Profiler GUI, what format can be used for a Dashboard Content Block? (Select 3)

Question74: Packet Analyzer Tooltips provides a summary of the calculated view metrics and various charts that compromise the view.
Where can you find Tooltips?

Question75: What is a benefit that Cascade provides that is not supported by most other network performance management solutions?

Question76: Which of the following are valid Dashboard Content Block Types? (Select 3)

Question77: A filter can be created in Cascade Pilot:

Question78: What is a benefit of Cascade's Deep-Packet Inspection? (Select 4)

Question79: How many Host Group Types can you define within Cascade Profiler?

Question80: You can apply a View within Cascade Pilot to a trace clip:

Question81: Trace clips can expire if arriving packets start to override old packets.
In order to keep a Trace Clip from expiring, you should: (Choose two.)

Question82: Deployment of Virtual NetProfiler, Virtual NetExpress, and Virtual Gateway is supported on which version of ESXi? (Choose three.)

Question83: SSL Decryption is only supported by which two of the following? (Choose two.)

Question84: What is the value provided by creating host groups in Cascade Profiler? (Select 2)

Question85: Packet Analyzer uses MicroFlow Indexing for what purposes? (Choose two.)

Question86: Company X wants to incorporate SPAN port monitoring into its Cascade deployment. An important point they should consider is to:

Question87: Which product category is Cascade likely to be included within? (Select 3)

Question88: When using a Network Performance Management tool such as Cascade, the term "drill-down" when troubleshooting usually refers to:

Question89: A capture job definition on Cascade Shark appliance may include:

Question90: In a mixed Windows 2003 and Windows 2008 domain environment, what are the options for setting up Active Directory (AD) integration with Cascade? (Select 2)

Question91: How many simultaneous users can access Cascade Profiler?

Question92: What is lost by using sFlow and not NetFlow for Cascade?

Question93: When using CX-Tracer Module, specific ICA metrics can be obtained for which environment?

Question94: What must be considered when sizing a Cascade Shark appliance? (Select 3)

Question95: What is an initiative with which Cascade can help? (Select 3)

Question96: When using Network Performance Management solutions for WAN management, network managers are typically most interested in:

Question97: In order to decode SSL traffic, AppResponse requires which of the following?

Question98: How does the Cascade Profiler determine the optimization levels achieved for WAN Optimization reports?

Question99: A logical Grouping of IP addresses in AppResponse is defined as:

Question100: From Cascade Pilot, reports may include:

Question101: Network Round-Trip-Time is measured by Cascade sensors as:

Question102: Where in the Cascade Profiler GUI do you change the hosts considered internal to the Profiler?

Question103: Which of the following pieces of information is required when configuring an Cascade Enterprise Profiler?

Question104: Riverbed SteelHead sends SteelFlow-Net to what devices? (Choose two.)

Question105: What are the features available in Cascade Pilot that are NOT available in Cascade Pilot Personal Edition (PE)? (Select 3)

Question106: The correct Profiler to use for a deployment with 800K flows per minute would be:

Question107: Refer to the exhibit.

Under Accounts, the admin user can have the Actions options of Audit, Edit, Copy, Delete and Disable.
What are the Actions that a RAIDUS User can have?

Question108: Within Cascade Pilot, how are views used to analyze a trace file? (Select 2)

Question109: For sampled data in a chart in Cascade Pilot, you can: (Select 2)

Question110: Which of the following remote user authentications and authorizations are supported by NetProfiler?
(Choose two.)

Question111: One of the theories behind NetProfiler Services is:

Question112: What is the size of the Cascade Shark appliance OS drive?

Question113: Which of the following can Flow Gateway not do?

Question114: When creating a new dashboard the default visibility for other users is:

Question115: How can Cascade Profiler help with a server virtualization project?

Question116: The Profiler can calculate what three types of Round Trip Time metrics?

Question117: To change the page refresh rate for the Cascade Profiler UI from one minute to ten minutes for a specific user which page would you navigate to?

Question118: What is the maximum number of flows that can be sent from a remote Cascade device (Sensor/Gateway) to an Cascade Express Profiler?

Question119: What operating system will not support installation of Packet Analyzer?

Question120: What two methods does the Profiler have for getting MAC address information? (Select 2)

Question121: When looking at TCP sessions, the following conditions are considered an error (Select 2):

Question122: Simple Network Management Protocol can be used on Cascade Profiler for:

Question123: What is the minimum speed recommended for interfaces on Cascade Enterprise Profiler interconnections?

Question124: Some common protocols, which may be observed on a network with visibility tools, include:

Question125: What is the maximum number of 10G ports that a Cascade Sensor can support?

Question126: What are the capabilities of NetProfiler behavior analysis? (Choose two.)

Question127: The best definition of a Host Scan is:

Question128: Which of the following are valid Cascade Profiler Report export formats? (Select 3)

Question129: Which types of automated analytics are available on Cascade?

Question130: What is one way Cascade can assist with Application Performance problems?

Question131: Beginning with version 9.0.5 what is the maximum number of flows per minute that the Cascade Gateway can be licensed for?

Question132: Complete the following sentence: On NetProfiler, an interface centric report is used to report the amount of traffic...

Question133: What is the maximum number of Cascade Gateway and Sensor appliances that can send data to a Standard Profiler?

Question134: Within Cascade Pilot, a sequence diagram is used to:

Question135: If you needed to replicate flow from a router and forward it in its native format to additional flow collectors, which Cascade device would you use?

Question136: What are the primary differences between an Express and Standard Profiler?

Question137: Which of the following dashboard widgets is most suitable for monitoring the status of an entire Service, including both front-end and back-end (server-server) segments?

Question138: Which of the following devices could be the data source for Cascade Profiler? (Select 3)

Question139: In order to work with live traffic on the Cascade Shark from Cascade Pilot:

Question140: NetProfiler allows you to build maps of an application and monitor the interactions between application components.
What are these cold?

Question141: Auxiliary panels are used in custom dashboards to display the following"

Question142: Which program needs to be installed on the Windows Active Directory Server to retrieve and forward identity logs to a NetProfiler?

Question143: When flows in excess of the licensed limit are received by a Profiler what happens to them?

Question144: Refer to the exhibit.

When creating a link congestion policy in Cascade Profiler, what are options that can be selected? (Select
4)

Question145: Where are Application Names used within the Cascade Profiler GUI?

Question146: Traffic is typically analyzed within a Cascade Shark capture job trace using Cascade Pilot by:

Question147: How does Cascade obtain information about Retransmissions in the network?

Question148: Flow data being sent from a Gateway to a Profiler is: (Select 3)

Question149: What is the maximum number of flows a Profiler Express is licensed to process?

Question150: In the Cascade Profiler GUI, how frequently is the dashboard refreshed by default?

Question151: On Cascade Profiler, Why would you want to create a generic group encompassing the 0.0.0.0/0 definition?

Question152: Cascade collects flow data on which of the following boxes? (Select 2)

Question153: What benefit does Cascade Profiler provide when obtaining SNMP information from an Access Tier switch?

Question154: User Interface Preferences give users the ability to: (Select 3)

Question155: Outgoing Mail Server (SMTP) Settings enable Cascade Profiler to: (Select 2)

Question156: Which version(s) of SNMP alert can be sent from the Cascade Profiler?

Question157: Which of the following are valid data sources for Flow Gateway? (Choose four.)

Question158: Two popular data center projects that network visibility tools can assist with include:

Question159: What is the maximum number of capture jobs that can be created on a Cascade Shark appliance?

Question160: Which fields are generally available for export using NetFlow technology? (Select 3)

Question161: From what data source can AppResponses Application Stream Analysis process generate 60 different TCP/IP metrics?

Question162: In Cascade Profiler, what is the maximum number of custom dashboards you can have?

Question163: From what source does Cascade obtain Identity (user name) information?

Question164: How does Cascade performance analytics assist with Performance Monitoring?

Question165: Packet de-duplication in Cascade Shark appliance applies to:

Question166: In the Cascade Profiler GUI, where can you map a name to the combination of IP Address and TCP Port Number?

Question167: Packet Analyzer concurrent licenses are served to clients from which of the following platforms? (Choose three.)

Question168: There are the major characteristics of groups in SteelCentral Portal.

Question169: What signaling protocols are supported by AppResponse VoIP Monitoring Module? (Choose three.)

Question170: The trending/indexing setting on the Cascade Shark appliance apply to:

Question171: Which of the following reports provide the best view into how often an analytic policy has alerted over time, which specific metrics have fired, and by how much the observations exceed the tolerance around the forecasted values?

Question172: What is one key benefit Cascade provides for Data Center Consolidation Projects?

Question173: Once the Cascade Shark appliance has an initial configuration with an IP Address set to 10.1.1.1 you can connect to it from a web browser using the URL:

Question174: Voice over IP (VoIP) monitoring by Network Performance Management systems typically concerns:

Question175: How are trace clips created in Cascade Pilot? (Select 2)

Question176: What are the primary differences between NetExpress, Standard NetProfiler, and Enterprise Cluster solutions? (Choose two.)

Question177: What is one of the benefits Cascade provides compared to other vendors that have both flow and probe technology?

Question178: An interactive view within Cascade Pilot is:

Question179: Which of the following is the most likely reason that a newly added user cannot log in to SteelCentral Portal?

Question180: How do you perform the initial Cascade Shark appliance configuration during installation? (Select 3)

Question181: Within Cascade Pilot, trace clips represent:

Question182: How can Cascade Profiler help me understand where I should be optimizing or placing Steelheads?

Question183: Flow-based data can be exported from NetShark using which of the following protocols? (Choose two.)

Question184: AppNetwork Path Analysis, a troubleshooting workflow in AppResponse, is enabled by which solution?

Question185: In SteelCentral Portal, reports can be created in these ways:

Question186: Cascade RADIUS support is for:

Question187: How can I increase the amount of packet storage capacity available on an AppResponse appliance?

Question188: What are the Cascade Profiler Alert Levels?

Question189: Where can you look in the Cascade Profiler Web User Interface to determine the licensed flow rates?

Question190: How do you configure a new user for the Cascade Shark appliance?

Question191: Views on Cascade Pilot refer to:

Question192: In the Cascade Profiler, what best describes a "Host Group"?

Question193: What is the proper way to install and license Cascade Pilot? (Select 2)

Question194: A list of live interfaces within the Cascade Pilot interface:

Question195: What syntax is used to define Host Groups within Cascade Profiler?

Question196: When you create a trace clip with Packet Analyzer, the packets are selected from the Job Trace and copied to a new repository in the remote probe.

Question197: CX-Tracer is an AppResponse Module designed for increased visibility into:

Question198: What are the ways Cascade Profiler can graphically depict response times in the GUI?

Question199: How many Cascade Shark appliances can be accessed by a single Cascade Pilot license?

Question200: When choosing between deploying a virtual and physical NetProfiler appliance, which of the following are important? (Choose three.)

Question201: Within Cascade Profiler, what best describes an "Application"?

Question202: Which technologies can be used to determine that a client's TCP Window size has shrunk to zero?

Question203: In configuring a router to send NetFlow to Cascade, an important point to consider is:

Question204: To organize hosts into logical arrangements what is important to configure on Cascade Profiler?

Question205: Which of the following are differences between the Cascade Sensor and the Cascade Shark appliances?
(Select 2)

Question206: NetProfiler provides a view of what is occurring on a network at what level of detail?

Question207: A Microflow index can be configured for a capture job but cannot be added to a PCAP trace file.

Question208: From the perspective of reporting from the Cascade Profiler, what are the differences between flow reported by a Cascade Sensor (minimum version 9.0) and a Cascade Shark (minimum version 3)?

Question209: When Cascade Pilot is connected to Cascade Shark:

Question210: What types of filters are supported by a capture job on the Cascade Shark appliance?

Question211: In which situation should you deploy NetExpress at a large corporate enterprise? (Choose two.)

Question212: On the Cascade Profiler using Switch Port Discovery, under switching setup, the device type can be the following. (Select 2)

Question213: What is the Packet Storage size of a CSK-02200 Cascade Shark appliance?

Question214: Cascade provides benefits in which of the following areas?

Question215: For Security Policies, we can suppress the alerting against a specific host or subnet through which of the following methods?

Question216: What is the minimum number of physical boxes involved in a Cascade Enterprise Profiler?

Question217: What value does NetFlow provide? (Select 2)

Question218: Cascade Services are defined using which of the following terms?

Question219: If the status in a SteelCentral Portal Application Map does not show colors, this is likely because:

Question220: What is the name of the API used to access multiple portions of NetProfiler, including the UI, host groups, and services?

Question221: To connect a Cascade Pilot for the first time to a Cascade Shark appliance, you must: (Select 2)

Question222: What piece of information is provided to Cascade Profiler from a Cascade Sensor that is not provided to Cascade Profiler from a Cascade Shark appliance?