EMT Practice Test

1. Question Content...

---

Question1: Which two storage unit types can be configured in NetBackup? (Select two.)

Question2: An administrator has backups failing with status code 96 due to tapes being prevented from returning to the scratch volume pool after the images they contain expire.
What prevented the media from returning to the scratch pool?

Question3: A Windows 2008 R2 64-bit client backup job hung. The NetBackup administrator cancelled the job in the Administration Console and restarted the NetBackup Client Service on the client. The administrator initiated another backup of the client, and it also hung.
Which NetBackup client process should be terminated to allow new backups to occur?

Question4: An administrator wants to specify which networks or interfaces to use for outgoing NetBackup traffic from a selected host.
Which option under Master Server Host Properties should the administrator use to configure this?

Question5: Which policy directive(s) should an administrator place in the Backup Selections tab to ensure the system is protected when backing up a Windows server?

Question6: Refer to the exhibit.

An assigned backup tape contains four images, two of which are expired. A new backup is initiated.
How does NetBackup write the new image?

Question7: A VMware policy has been configured to back up a Linux virtual machine.
Which condition must be met to ensure all data is flushed from memory to disk?

Question8: An administrator took Media Server, mediaA, offline for maintenance and set up a new Media Server, mediaB, with access to the previously backed up data. When restores are performed for data that was backed up by mediaA, the restores fail.
Which setting in the Host Properties must the administrator modify to allow successful restores?

Question9: A NetBackup Master Server has commenced writing four long-running duplication jobs on an AdvancedDisk disk pool. The value of Maximum concurrent jobs for the storage unit and Limit I/O streams for the disk pool are both set to 4.
There are 35 jobs queued on the Master Server that require this disk pool:
5 replication jobs with priority 9999
10 backup jobs with priority 999
20 duplication jobs with priority 99
Two restore jobs that require this disk pool are then submitted with default priority.
Which job type goes active next?

Question10: The administrator of a large bank needs to preserve financial information for an extended period of time.
The bank's NetBackup 7.6.1 catalog is now over 800GB in size, causing the catalog backups to contend for resources with production system backups.
How can the administrator shorten the time needed to back up the catalog?

Question11: What should an administrator do to enable backups to span multiple BasicDisk storage units?

Question12: An administrator discovers that backup images configured with a fixed two-week retention are failing to expire.
What is a possible cause of this issue?

Question13: Which configuration file should an administrator modify to enable local fingerprint caching on a Netbackup MSDP client?

Question14: An administrator needs to decrease the total amount of time required to back up a UNIX file server, but requires a full backup every night for recovery purposes.
How should the administrator proceed?

Question15: Which status code applies only to disk storage units?

Question16: Which utility should an administrator use to verify tape device configuration?

Question17: Auto Image Replication is being used to replicate New York backups to London. The New York backups have completed.
What is the next step?

Question18: An administrator has a scheduled policy that backs up 20 clients, each with multiple mount points and multiple streams enabled. One of the jobs has failed and is in an Incomplete state.
How should the administrator verify the incomplete job runs prior to the next scheduled backup?

Question19: An administrator needs to prevent users on all client systems from performing user-directed restores while ensuring they are able to view the contents of all previous backup images.
What should the administrator configure to accomplish this goal?

Question20: A restore must be performed. An administrator is attempting to view the valid images for a client, but the following error occurs:
WARNING: Server does not contain any valid images.
Which two parameters may be configured incorrectly? (Select two.)

Question21: Which NetBackup 7.6.1 command is used to report the potential free space of AdvancedDisk storage units?

Question22: An administrator runs the following command on the Master Server to test connectivity to a client:
bptestbpcd -client clientA
The administrator receives the following message:
<16> bptestbpcd main: Function ConnectToBPCD (clientA) failed: 25 cannot connect on socket Which two reasons may cause the error message? (Select two.)

Question23: What is the image removal behavior for relocated images from a disk staging storage unit when the high water mark is reached during a backup?

Question24: Refer to the exhibit.

What is the outcome of the policy shown in the exhibit?

Question25: A NetBackup environment suffers from intermittent network outages between the MSDP Media Server and clients during the backup window. This results in multiple backup failures.
How should an administrator overcome the backup issues?

Question26: An organization needs to have backups span between different BasicDisk storage units. The "Allow backups to span disk" setting has been enabled in Host Properties.
Which additional requirement must an administrator meet to allow backups to span disks?

Question27: An administrator needs to store secure tape copies of protected data to an offsite location.
How can the administrator automatically eject tape media daily and create detailed reports?

Question28: An administrator has a backup policy with the following policy attributes:
3 paths listed in the Backup Selections list
5 clients listed in the Clients list
Allow multiple data streams is selected
Limit Jobs per policy is set to 4
How many jobs go Active when the job is started, excluding parent jobs?

Question29: Which command is used to determine the state of an AdvancedDisk storage server?

Question30: Which disk backup method is unsupported with Media Server load balancing?

Question31: Which utility should an administrator use to verify library device functionality?

Question32: Which two actions should an administrator take to allow NetBackup to manage the allocation of volumes to volume pools? (Select two.)

Question33: In which two places can an administrator view the amount of space used in the Media Server Deduplication Pool? (Select two.)

Question34: Which command should an administrator use to determine which storage lifecycle policy's image copies are incomplete?

Question35: A NetBackup administrator configures a policy to perform file system backups of multiple client systems using the Allow multiple data streams feature. All other policy attributes are at default settings.
Which Master Server parameter must be configured to enable the backup jobs from a client to run concurrently?

Question36: Which command should an administrator run to display all images written to both disk and tape for a particular client?

Question37: An administrator wants clients in a remote office to perform client-side deduplication instead of Media Server deduplication.
Where should the administrator set the parameter in the Host Properties to ensure client-side deduplication is performed?

Question38: What is required to implement Auto Image Replication?

Question39: An administrator needs to back up 100 clients using 10 LTO5 tape drives.
Which policy setting will perform the backup fastest?

Question40: NetBackup has frozen some of the tapes added to the robot.
Which log must be enabled to determine why the tapes were frozen?

Question41: Which two prerequisites must an administrator perform to enable restoration of individual objects and attributes in Active Directory? (Select two.)

Question42: What happens if the Maximum data streams property is enabled for a particular client?

Question43: Backups to a storage device fail with the following error message:
Disk storage is down (2106)
The storage server is an OpenStorage (OST) host, and the Master Server and Media Server are both acting as Media Servers under Credentials > Storage Servers in the Administration Console. The disk pool is in an Up state and the storage server is in a Down state. Troubleshooting confirmed the OST plug-ins on the servers are mismatched.
Which command should an administrator use to check the plug-in version installed on the servers?

Question44: What is the default length of time that true image restore (TIR) information is retained in the NetBackup catalog?

Question45: Which command can be used to recover the NBDB from the staging location?

Question46: Which command should an administrator use to check the number of images that need to complete the storage lifecycle secondary processing?

Question47: The following storage lifecycle policy was used to back up data from a client.
Storage Lifecycle Policy
Backup to AdvancedDisk
Duplication to tape
Duplication to AdvancedDisk
How should an administrator restore data from the tape using NetBackup?

Question48: Which command should an administrator use to generate a list of all files backed up on a client for a specific backup job?

Question49: An administrator must recover an expired image from a tape where only one remaining copy exists and there are other unexpired images on the tape.
How should the administrator ensure the image is retained?

Question50: A NetBackup environment with a single tape storage unit is experiencing performance issues when running full backups of a Windows file server with over a million small files. Backups for all other clients on the same network are performing adequately.
What should the administrator modify to improve performance for the client?

Question51: On which system(s) is the NetBackup 7.6.1 LiveUpdate agent installed by default?

Question52: Which Storage Unit Group option causes NetBackup to choose the least recently selected storage unit in the list as each new job is started?

Question53: Using the default values in the activity monitor, a failed job is discovered among hundreds of jobs that ran during the evening. The administrator would like to view all related jobs to verify they completed successfully.
Where in the activity monitor can the administrator find all related jobs?

Question54: A storage unit group is configured that has disk and then tape listed. During a backup session, jobs start retrying and then running on the tape device only.
What is a likely cause of the change?

Question55: Which volume pool must be manually created in NetBackup?

Question56: Backup jobs to an MSDP storage unit of a large EXT3 file system for a Linux client connected via a 1 GbE network are taking excessive time.
Which two settings should an administrator change to improve the performance of the backups? (Select two.)

Question57: Which command can an administrator execute on a NetBackup client to measure backup performance?

Question58: An MSDP Media Server is experiencing performance issues when running multiple deduplication backup jobs concurrently over 10 GbE. When switched to AdvancedDisk on the same Media Server, the backups perform well.
Which step can be utilized to mitigate the performance issues?

Question59: A policy is created using the Standard policy type. The default settings are used. Linux hosts s1 and s2 are added in the client list and ALL_LOCAL_DRIVES is specified in the Backup Selection.
Host s1 has the mount points listed below:
/
/opt
/usr
/usr/home
Host s2 has the mount points listed below:
/
/proc
/tmp
/usr
How many streams will be created when the policy runs for both clients?

Question60: Backups of a newly added Windows Server 2008 guest virtual machine are failing with the following status:
156: snapshot error encountered
The associated bpfis process log indicates that the attempt to quiesce this virtual machine failed.
Which two steps should the administrator review to help resolve the issue? (Select two.)

Question61: A NetBackup policy is configured to back up the following paths for a client:
D:\stage
E:\data
E:\home
F:\production
Multistreaming is enabled for the backups, and multiplexing is set to 4. Backup streams are running slowly.
Which step should the administrator consider to improve backup performance?

Question62: An administrator initiated a manual backup of clientA on master1. The backup failed with the message:
client is offline(1000)
Which Host Properties setting should an administrator modify to resolve this issue?

Question63: What is the state of the catalog backup media after successful completion of a catalog recovery using the Catalog Recovery Wizard?

Question64: The Master Server catalog is being recovered to a new server. The administrator receives the message displayed below:
Please insert the following media and run the volume configuration wizard or the vmupdate command to update the NetBackup database.
Host - train1
MediaID - GBP847
Barcode - GBP847S1
In the Administration Console, barcode GBP847S1 is associated with media ID P847S1.
How should the administrator proceed?

Question65: Which statement applies to a NetBackup calendar based schedule in a Windows policy type?

Question66: An administrator wants to use a client as the VMware backup host.
Where is the name of the VMware backup host entered in NetBackup?

Question67: Which value under Storage Unit Properties reflects the total amount of space allocated to a basic disk storage unit?

Question68: How should an administrator limit the total number of backup or duplication jobs that write to or read from an AdvancedDisk pool concurrently?

Question69: Which capability is provided by rebasing in an MSDP storage pool?

Question70: Weekly full backups run for clientA on master1 using a storage unit that belongs to media1. The administrator is required to retain clientA's full backups for a period of four months. When the administrator modifies the Full schedule, four months is missing from the selection list.
Where should the administrator add the four-month retention period under Host Properties?

Question71: A Windows policy protects over 100 servers using the directive ALL_LOCAL_DRIVES. The backup window for this policy is a two-hour window that is unused by any other policy. When the jobs run, the overall performance of the disk storage unit is degraded.
Which setting should the administrator modify to reduce the number of concurrent streams writing to the disk storage unit to 10 during the backup window?

Question72: A NetBackup Master Server has many backups running each night to an MSDP pool that take a long time to complete. While these backups are running, replication jobs are queued.
Which action should the administrator perform to ensure replications can occur without waiting for the backups to complete?

Question73: Which schedule can be configured as a synthetic backup in addition to the full backup schedule type?

Question74: An administrator needs to duplicate a backup that completed successfully earlier that same day.
How can this be accomplished?

Question75: Which two appliance performance scenarios benefit from seeding the MSDP pool? (Select two.)

Question76: Which parameter in NetBackup Management > Host Properties must be modified to change the logging level to 5 for client1.domain?

Question77: Where should the administrator set the parameter in the Host Properties to enable failed restore jobs to automatically retry on Client1?

Question78: An administrator is configuring a remote client over a high latency WAN network.
Which setting should be modified to improve the performance of the first backup using client deduplication?

Question79: Which option is available with a Trusted Master Server?

Question80: How frequently does content router queue processing (CRQP) run, by default?

Question81: Where should an administrator look in the NetBackup Administration Console to determine whether an AdvancedDisk storage server is configured?

Question82: A UNIX client has the mount points listed below:
/var
/usr
/opt
/home
A backup policy for this client has "Allow multiple data streams" enabled and contains a backup selections list with the ALL_LOCAL_DRIVES directive. It also contains an exclude list that excludes /home.
What happens when this backup policy runs?

Question83: After creating a NBU-Catalog backup policy, an administrator receives the following message:
DR file is on the same partition as your catalog and will be unusable in an actual disaster or disk failure.
Which two options are available to an administrator to ensure the DR file is available for future use?
(Select two.)

Question84: An administrator tries to suspend an active job from the NetBackup Activity Monitor, but discovers that the option is grayed out.
What is preventing the administrator from suspending the job?

Question85: Which operation compares the contents of an image to the NetBackup catalog?

Question86: Which two conditions must be met to change the volume group of a tape? (Select two.)

Question87: What are two possible causes for job failure when a Windows policy is configured to use Accelerator?
(Select two.)

Question88: An administrator has an environment that runs over one thousand jobs a night. Some nights there are hundreds of jobs queued waiting for a resource.
Which action should the administrator take in the event that specific jobs need to run when a resource next becomes available during that evening's backup session?

Question89: Refer to the exhibit.

Two media servers, sharing a library with 10 tape drives, exist in the NetBackup 7.6.1 environment displayed in the exhibit. Both weekly full and daily differential incremental backups need to run for the clients and each schedule has a different retention period. Because of network topology, some clients back up to Media Server 1 and some back up to Media Server 2. The environment suffers from multiple status
96 failures during the backup window.
How can the administrator minimize the number of failures?

Question90: Which file contains LiveUpdate server configuration?

Question91: In which order should an administrator perform upgrades to a major release in a NetBackup environment?

Question92: Which two schedule types are allowed for the NBU-Catalog policy type? (Select two.)

Question93: The MSDP catalog on a Media Server has become corrupted.
Which two methods are available to bring the MSDP pool back online? (Select two.)

Question94: Which action is performed by the NetBackup deduplication plug-in?

Question95: A tape library had the robot firmware upgraded and now the robot is reading the barcodes with additional characters.
How should an administrator enable NetBackup 7.6.1 to use the same characters as before the firmware upgrade occurred?

Question96: A file system on a server is corrupt and a restore is required. The system is being backed up using True Image Restore with move detection enabled.
The most recent backups of this file system are displayed below.
- Monday: A full backup
- Tuesday: A differential incremental backup
- Wednesday: A cumulative incremental backup
- Thursday: A differential incremental backup
What is the minimum number of backup images that will be used to fully restore the server?

Question97: In the NetBackup Administration Console or Java console, how should an administrator change a disk pool to down status?

Question98: An administrator has a backup policy with the following attributes:
5 paths listed in the Backup Selections list
3 clients listed in the Clients list
Allow multiple data streams is selected
Max Jobs per Client value set to 4
How many jobs go Active when the job is started, excluding parent jobs?

Question99: Which information is validated during an image verification operation?

Question100: A backup image on tape is due to expire in one week. The administrator needs to keep the image available for restore indefinitely.
Which two methods can be used to accomplish this goal? (Select two.)

Question101: An administrator of a multi-site, multi-domain NetBackup environment wants to be able to provide redundancy for backups as well as protecting the NetBackup image database. All backups must have on- site and off-site disk copies as well as off-site tape copies and must be restorable at all times, even if a single NetBackup server/storage failure occurs.
Which NetBackup feature should the administrator use to implement the functionality?

Question102: Backup jobs end with the following series of messages in the Job Details:
Error bpbrm(pid= ) db_FLISTsend failed: Unable to connect to the database (2505)
12/05/2013 15:39:45 - job 63389 was restarted as job 63390
Failed to get status code information (2505)
Which process is failing to respond?

Question103: An administrator wants to review the throughput of backup clients to improve performance.
Which area of the NetBackup Administration Console displays the throughput of backups for all clients?